Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AMPA2013 Mapping and Delivery Guide
Complete changeover operation

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency AMPA2013 - Complete changeover operation
Description
Employability Skills
Learning Outcomes and Application This unit describes the skills and knowledge required to re-position carcases on a processing chain.This unit is applicable to abattoirs, wild game processing establishments and knackeries.All work should be carried out to comply with workplace and hygiene requirements. This unit applies to individuals who work under general supervision, exercise limited autonomy and have some accountability for their own work.No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.This unit must be delivered and assessed in the context of Australian meat processing standards and regulations.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessment must occur in the workplace under normal production conditions.

Competency must be demonstrated at chain speed.

As a minimum, the following three forms of assessment must be used:

quiz of underpinning knowledge

workplace demonstration

workplace referee or third-party report of performance over time

Assessors must satisfy the current standards for RTOs.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Re-position carcase
  • Complete changeover in accordance with workplace requirements
  • Complete changeover in accordance with workplace health and safety requirements
  • Store or dispose of gambrels, spreaders and slides, when used, according to workplace requirements
  • Check equipment for defects (when this forms part of work instructions)
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Element

Performance criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Re-position carcase

1.1 Complete changeover in accordance with workplace requirements

1.2 Complete changeover in accordance with workplace health and safety requirements

1.3 Store or dispose of gambrels, spreaders and slides, when used, according to workplace requirements

1.4 Check equipment for defects (when this forms part of work instructions)

The candidate must re-position carcases on a processing chain.

The candidate must:

complete changeover in accordance with work instructions

complete changeover operation to workplace health and safety requirements

treat iron work such as gambrels, spreaders and rollers in accordance with workplace requirements

identify relevant defects in iron work (e.g. spreader, rollers), if used

use correct manual handling techniques for changeover operation

apply relevant regulatory requirements

The candidate must demonstrate a basic factual, technical and procedural knowledge of:

workplace health and safety requirements including manual handling procedures associated with changeover

the consequences of incorrectly re-positioning the carcase on the chain

work instructions for the changeover operation

relevant regulatory requirements

appropriate reporting procedures for defects

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Element

Performance criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Re-position carcase

1.1 Complete changeover in accordance with workplace requirements

1.2 Complete changeover in accordance with workplace health and safety requirements

1.3 Store or dispose of gambrels, spreaders and slides, when used, according to workplace requirements

1.4 Check equipment for defects (when this forms part of work instructions)

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Complete changeover in accordance with workplace requirements 
Complete changeover in accordance with workplace health and safety requirements 
Store or dispose of gambrels, spreaders and slides, when used, according to workplace requirements 
Check equipment for defects (when this forms part of work instructions) 

Forms

Assessment Cover Sheet

AMPA2013 - Complete changeover operation
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AMPA2013 - Complete changeover operation

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: