Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AUM8087B Mapping and Delivery Guide
Assemble and install hydraulic system kit

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency AUM8087B - Assemble and install hydraulic system kit
Description This unit describes the application of skills and knowledge required to assemble, install and test a hydraulic system kit.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Employability Skills This unit contains Employability Skills.
Learning Outcomes and Application This unit applies to the automotive and related component manufacturing environment and involves application of skills and knowledge at a specialist level. These skills and knowledge are to be used within the scope of the person's job and authority.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Nil Nil
Competency Field Truck/Bus/Trailer Manufacture and Assembly
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan the job
  • Appropriate practices are identified and followed in accordance with OHS policy, standard operating procedures legislative and organisation requirements
  • Tools and equipment are selected to meet job requirements
  • Tools and equipment are checked to ensure they are in working order
  • Assembly and installation information is accessed and interpreted from manufacturer specifications
       
Element: Assemble and install hydraulic system kit
  • Hydraulic system kit is assembled in accordance with manufacturers specifications
  • Installation procedures are carried out in accordance with manufacturer specifications and tolerances
       
Element: Test hydraulic systems
  • Test information is accessed and interpreted from manufacturer specifications
  • System tests before or after installation are carried out in accordance with manufacturer specifications and tolerances
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the following is essential:

compliance with relevant legislative, regulations, standards, codes of practice and establish safe practices and enterprise policies and procedures for managing personal work priorities

maintaining a working knowledge of current work systems and practices

working and communicating effectively and positively with others involved in the work

applying, within authority, the requirements of the job or work role in relation to:

achieving production goals

achieving work quality goals

responding positively to changing work requirements

contributing effectively to cost reduction initiatives

effectively applying problem solving techniques

modify activities to cater for variations in workplace context and environment

assemble hydraulic system/components

install hydraulic system/components

test hydraulic system

use relevant tools and equipment

apply manual handling techniques

employ company OH&S procedures.

Context of and specific resources for assessment

assessment of the competency should take place in a safe working environment in a passenger motor vehicle manufacturing plant or simulated environment using tools/equipment/machinery required for the production process without undue disruption to the production process

assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints.

Method of assessment

A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:

assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge

assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application

assessment may be applied under project related conditions (real or simulated) and require evidence of process

assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

This section describes the essential skills and knowledge and their level, required for this unit.

Required skills

speak clearly and directly in order to maintain teamwork

apply teamwork to a range of situations

solve problems particularly in teams in order to meet performance indicators

show initiative in adapting to changing work conditions or contexts particularly when working across a variety of work areas

access, interpret and apply information on relevant organisation policies, procedures and instructions, particularly to ensure safety and compliance

manage time when planning, preparing and organising work priorities

take responsibility for organising own work priorities.

Required knowledge

relevant Occupational Health and Safety and Environmental regulations and enterprise policies and procedures needed to carry out work in a manner which ensures the safety of people, equipment and the environment. The specific regulations will vary according to the area of operation

enterprise technical work documentation covering procedures, specifications, schedules and work plans or equivalent

enterprise quality system documentation covering instructions, procedures, performance indicators and review processes or equivalent

enterprise cost minimisation/waste avoidance policies, procedures and practices

environmental protection requirements relating to the disposal of waste material

established communication channels and protocols

problem identification and resolution techniques

relevant technical information including graphical symbols

design and sketch hydraulic circuitry diagrams

types of hydraulic fluids and their application

equipment safety requirements

hydraulic system operating principles

hydraulic systems/component installation and test procedures

construction and operation of hydraulic systems relevant to application

manual handling techniques

aural, visual and functional assessments (including damage, corrosion, fluid levels, leaks, tests, wear and safety aspects).

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts.

OHS requirements may include:

Legislation and regulations, organisational safety policies and procedures and may include: the use of personal protective equipment and clothing, rescue services, fire fighting organisation and equipment, first aid equipment, hazard and risk control and elimination, systems covering the use of hazardous materials and substances and manual handling procedures including lifting and carrying.

Legislative requirements and procedures may include:

Applicable legislation, regulations and codes of practice, including those related to:

anti-discrimination

award and enterprise agreements

confidentiality and privacy

duty of care

employee relations

environment protection

equal opportunity

industrial relations

relevant industry codes of practice.

Organisationrequirements may include:

access and equity principles and practices

environmental management (waste disposal, recycling and re-use guidelines)

emergency and evacuation procedures

equipment use procedures

ethical standards

legal obligations

maintenance and storage procedures

OHS requirements

organisational and site guidelines

policies and procedures relating to own role and responsibility

procedural manuals

quality assurance guidelines

quality and continuous improvement processes and standards

recording and reporting guidelines.

Information may include:

vehicle/manufacturer specifications

product manufacturer specifications

company operating procedures

industry/workplace codes of practise

customer requirements

Statutory legislation

State/industry OHS legislation.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Appropriate practices are identified and followed in accordance with OHS policy, standard operating procedures legislative and organisation requirements 
Tools and equipment are selected to meet job requirements 
Tools and equipment are checked to ensure they are in working order 
Assembly and installation information is accessed and interpreted from manufacturer specifications 
Hydraulic system kit is assembled in accordance with manufacturers specifications 
Installation procedures are carried out in accordance with manufacturer specifications and tolerances 
Test information is accessed and interpreted from manufacturer specifications 
System tests before or after installation are carried out in accordance with manufacturer specifications and tolerances 

Forms

Assessment Cover Sheet

AUM8087B - Assemble and install hydraulic system kit
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

AUM8087B - Assemble and install hydraulic system kit

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: