Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AUMATN001 Mapping and Delivery Guide
Repair structural faults in vehicles

Version 1.0
Issue Date: December 2018


Qualification -
Unit of Competency AUMATN001 - Repair structural faults in vehicles
Description
Employability Skills
Learning Outcomes and Application This unit describes the performance outcomes required to inspect, assess and repair structural faults in vehicle bodies and components.It applies to those in an automotive manufacturing environment and involves the application of skills and knowledge at a specialist level.Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Common
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare
  • Workplace proceduresare identified and followed
  • Work instructions, repair plan, rectification reports and vehicle specifications are obtained and confirmed
  • Tools and equipment are selected and inspected for faults
       
Element: Assess defects to inform repair plan
  • Vehicle bodies and components are assessed to confirm type and cause of structural defect
  • Type of structural repair is selected and planned
  • Repair plan is presented to appropriate personnel for approval
  • Materials required for the repair are identified, obtained and prepared
       
Element: Repair defects
  • Defective section of vehicle body or component is repaired or replaced according to job specifications
  • Defect repair is finished to job specifications
  • Repaired defects are inspected for quality and serviceability according to workplace procedures
       
Element: Complete work processes
  • Work area is cleaned, and materials disposed of or recycled according to workplace procedures
  • Tools and equipment are cleaned, checked and stored according to workplace procedures
  • Faulty equipment is tagged and reported to supervisor
  • Repair documents are completed according to workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare

1.1 Workplace proceduresare identified and followed

1.2 Work instructions, repair plan, rectification reports and vehicle specifications are obtained and confirmed

1.3 Tools and equipment are selected and inspected for faults

2. Assess defects to inform repair plan

2.1 Vehicle bodies and components are assessed to confirm type and cause of structural defect

2.2 Type of structural repair is selected and planned

2.3 Repair plan is presented to appropriate personnel for approval

2.4 Materials required for the repair are identified, obtained and prepared

3. Repair defects

3.1 Defective section of vehicle body or component is repaired or replaced according to job specifications

3.2 Defect repair is finished to job specifications

3.3 Repaired defects are inspected for quality and serviceability according to workplace procedures

4. Complete work processes

4.1 Work area is cleaned, and materials disposed of or recycled according to workplace procedures

4.2 Tools and equipment are cleaned, checked and stored according to workplace procedures

4.3 Faulty equipment is tagged and reported to supervisor

4.4 Repair documents are completed according to workplace procedures


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare

1.1 Workplace proceduresare identified and followed

1.2 Work instructions, repair plan, rectification reports and vehicle specifications are obtained and confirmed

1.3 Tools and equipment are selected and inspected for faults

2. Assess defects to inform repair plan

2.1 Vehicle bodies and components are assessed to confirm type and cause of structural defect

2.2 Type of structural repair is selected and planned

2.3 Repair plan is presented to appropriate personnel for approval

2.4 Materials required for the repair are identified, obtained and prepared

3. Repair defects

3.1 Defective section of vehicle body or component is repaired or replaced according to job specifications

3.2 Defect repair is finished to job specifications

3.3 Repaired defects are inspected for quality and serviceability according to workplace procedures

4. Complete work processes

4.1 Work area is cleaned, and materials disposed of or recycled according to workplace procedures

4.2 Tools and equipment are cleaned, checked and stored according to workplace procedures

4.3 Faulty equipment is tagged and reported to supervisor

4.4 Repair documents are completed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Workplace procedures must include:

quality requirements

recording and reporting

use of equipment

WHS requirements.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Workplace proceduresare identified and followed 
Work instructions, repair plan, rectification reports and vehicle specifications are obtained and confirmed 
Tools and equipment are selected and inspected for faults 
Vehicle bodies and components are assessed to confirm type and cause of structural defect 
Type of structural repair is selected and planned 
Repair plan is presented to appropriate personnel for approval 
Materials required for the repair are identified, obtained and prepared 
Defective section of vehicle body or component is repaired or replaced according to job specifications 
Defect repair is finished to job specifications 
Repaired defects are inspected for quality and serviceability according to workplace procedures 
Work area is cleaned, and materials disposed of or recycled according to workplace procedures 
Tools and equipment are cleaned, checked and stored according to workplace procedures 
Faulty equipment is tagged and reported to supervisor 
Repair documents are completed according to workplace procedures 

Forms

Assessment Cover Sheet

AUMATN001 - Repair structural faults in vehicles
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

AUMATN001 - Repair structural faults in vehicles

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: