Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AUMATW002 Mapping and Delivery Guide
Inspect welding

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency AUMATW002 - Inspect welding
Description
Employability Skills
Learning Outcomes and Application This unit describes the performance outcomes required to prepare and perform welding inspections using established procedures.It applies to those in an automotive and related manufacturing environment.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Common
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare inspections
  • Welding requirements and weld specifications are identified from welding standards
  • Weld quality requirements for inspection are established and confirmed
  • Inspection methods, tools and test equipment are selected and prepared
  • Welding test and inspection plan is prepared according to workplace procedures
       
Element: Conduct inspections
  • Welding processes are monitored to ensure industry welding standards are met
  • Welding is tested according to test equipment workplace procedures
  • Weld defects are identified and corrective actions taken
  • Weld test results are analysed using test equipment and according to workplace procedures
       
Element: Report findings
  • Test results, analysis and recommendations for action are reported according to workplace procedures
  • Test result sheets are legibly completed
  • Work area is cleaned, and waste materials disposed of, reused or recycled according to workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare inspections

1.1 Welding requirements and weld specifications are identified from welding standards

1.2 Weld quality requirements for inspection are established and confirmed

1.3 Inspection methods, tools and test equipment are selected and prepared

1.4 Welding test and inspection plan is prepared according to workplace procedures

2. Conduct inspections

2.1 Welding processes are monitored to ensure industry welding standards are met

2.2 Welding is tested according to test equipment workplace procedures

2.3 Weld defects are identified and corrective actions taken

2.4 Weld test results are analysed using test equipment and according to workplace procedures

3. Report findings

3.1 Test results, analysis and recommendations for action are reported according to workplace procedures

3.2 Test result sheets are legibly completed

3.3 Work area is cleaned, and waste materials disposed of, reused or recycled according to workplace procedures

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare inspections

1.1 Welding requirements and weld specifications are identified from welding standards

1.2 Weld quality requirements for inspection are established and confirmed

1.3 Inspection methods, tools and test equipment are selected and prepared

1.4 Welding test and inspection plan is prepared according to workplace procedures

2. Conduct inspections

2.1 Welding processes are monitored to ensure industry welding standards are met

2.2 Welding is tested according to test equipment workplace procedures

2.3 Weld defects are identified and corrective actions taken

2.4 Weld test results are analysed using test equipment and according to workplace procedures

3. Report findings

3.1 Test results, analysis and recommendations for action are reported according to workplace procedures

3.2 Test result sheets are legibly completed

3.3 Work area is cleaned, and waste materials disposed of, reused or recycled according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Workplace procedures must include:

recording and reporting guidelines for inspection and test results

use of welding test equipment

weld quality guidelines

WHS requirements to conduct weld inspection.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Welding requirements and weld specifications are identified from welding standards 
Weld quality requirements for inspection are established and confirmed 
Inspection methods, tools and test equipment are selected and prepared 
Welding test and inspection plan is prepared according to workplace procedures 
Welding processes are monitored to ensure industry welding standards are met 
Welding is tested according to test equipment workplace procedures 
Weld defects are identified and corrective actions taken 
Weld test results are analysed using test equipment and according to workplace procedures 
Test results, analysis and recommendations for action are reported according to workplace procedures 
Test result sheets are legibly completed 
Work area is cleaned, and waste materials disposed of, reused or recycled according to workplace procedures 

Forms

Assessment Cover Sheet

AUMATW002 - Inspect welding
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AUMATW002 - Inspect welding

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: