Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AUMFTA003 Mapping and Delivery Guide
Set and adjust automotive production machine tools

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency AUMFTA003 - Set and adjust automotive production machine tools
Description
Employability Skills
Learning Outcomes and Application This unit describes the performance outcomes required to set and adjust production machine tools.It applies to those in an automotive manufacturing environment and involves the application of skills and knowledge at a specialist level.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Manufacturing - Passenger Vehicle
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare
  • Job instructions and quality requirements are located and confirmed with appropriate personnel
  • Tools and equipment required for the job are selected and checked for faults and correct operation
  • Materials required to complete the job are identified and prepared
       
Element: Select and check machining tools
  • Machining tools are selected according to the machine’s maintenance schedule and specifications
  • Machining tools are inspected and tested for compliance with specifications
  • Out-of-specification tools are processed for repair or disposal according to workplace procedures
  • Machining tools are cleaned, prepared for use, and protected for transit
       
Element: Remove and replace machining tools
  • Required location for the machining tools is checked and confirmed against machine specifications
  • Machine is made safe according to work health and safety (WHS) requirements and workplace procedures prior to commencing work
  • Machining tools are located and removed, and replacement machining tools are installed and set to machine specifications
  • Machine safety guards are checked for correct fitting according to machine specifications
  • Test runs are conducted according to WHS requirements and workplaceprocedures, and sample products are checked
       
Element: Maintain machining tools and stock levels
  • Machining tools are maintained according to workplace procedures
  • Stock levels of machining tools are reviewed and action taken to avoid stock-out situations
  • Stock levels of consumables are maintained to support continuity of operations
       
Element: Complete work processes
  • Work area is cleaned, and materials disposed of or recycled according to workplace procedures
  • Tools and equipment are cleaned, checked, maintained and stored according to workplace procedures
  • Workplace documentation is completed according to workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare

1.1 Job instructions and quality requirements are located and confirmed with appropriate personnel

1.2 Tools and equipment required for the job are selected and checked for faults and correct operation

1.3 Materials required to complete the job are identified and prepared

2. Select and check machining tools

2.1 Machining tools are selected according to the machine’s maintenance schedule and specifications

2.2 Machining tools are inspected and tested for compliance with specifications

2.3 Out-of-specification tools are processed for repair or disposal according to workplace procedures

2.4 Machining tools are cleaned, prepared for use, and protected for transit

3. Remove and replace machining tools

3.1 Required location for the machining tools is checked and confirmed against machine specifications

3.2 Machine is made safe according to work health and safety (WHS) requirements and workplace procedures prior to commencing work

3.3 Machining tools are located and removed, and replacement machining tools are installed and set to machine specifications

3.4 Machine safety guards are checked for correct fitting according to machine specifications

3.5 Test runs are conducted according to WHS requirements and workplaceprocedures, and sample products are checked

4. Maintain machining tools and stock levels

4.1 Machining tools are maintained according to workplace procedures

4.2 Stock levels of machining tools are reviewed and action taken to avoid stock-out situations

4.3 Stock levels of consumables are maintained to support continuity of operations

5. Complete work processes

5.1 Work area is cleaned, and materials disposed of or recycled according to workplace procedures

5.2 Tools and equipment are cleaned, checked, maintained and stored according to workplace procedures

5.3 Workplace documentation is completed according to workplace procedures

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare

1.1 Job instructions and quality requirements are located and confirmed with appropriate personnel

1.2 Tools and equipment required for the job are selected and checked for faults and correct operation

1.3 Materials required to complete the job are identified and prepared

2. Select and check machining tools

2.1 Machining tools are selected according to the machine’s maintenance schedule and specifications

2.2 Machining tools are inspected and tested for compliance with specifications

2.3 Out-of-specification tools are processed for repair or disposal according to workplace procedures

2.4 Machining tools are cleaned, prepared for use, and protected for transit

3. Remove and replace machining tools

3.1 Required location for the machining tools is checked and confirmed against machine specifications

3.2 Machine is made safe according to work health and safety (WHS) requirements and workplace procedures prior to commencing work

3.3 Machining tools are located and removed, and replacement machining tools are installed and set to machine specifications

3.4 Machine safety guards are checked for correct fitting according to machine specifications

3.5 Test runs are conducted according to WHS requirements and workplaceprocedures, and sample products are checked

4. Maintain machining tools and stock levels

4.1 Machining tools are maintained according to workplace procedures

4.2 Stock levels of machining tools are reviewed and action taken to avoid stock-out situations

4.3 Stock levels of consumables are maintained to support continuity of operations

5. Complete work processes

5.1 Work area is cleaned, and materials disposed of or recycled according to workplace procedures

5.2 Tools and equipment are cleaned, checked, maintained and stored according to workplace procedures

5.3 Workplace documentation is completed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Workplace procedures must include:

continuous improvement programs

recording and reporting

use of tools and equipment

WHS requirements relating to setting and adjusting production machine tools

workplace quality standards for setting and adjusting production machine tools.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Job instructions and quality requirements are located and confirmed with appropriate personnel 
Tools and equipment required for the job are selected and checked for faults and correct operation 
Materials required to complete the job are identified and prepared 
Machining tools are selected according to the machine’s maintenance schedule and specifications 
Machining tools are inspected and tested for compliance with specifications 
Out-of-specification tools are processed for repair or disposal according to workplace procedures 
Machining tools are cleaned, prepared for use, and protected for transit 
Required location for the machining tools is checked and confirmed against machine specifications 
Machine is made safe according to work health and safety (WHS) requirements and workplace procedures prior to commencing work 
Machining tools are located and removed, and replacement machining tools are installed and set to machine specifications 
Machine safety guards are checked for correct fitting according to machine specifications 
Test runs are conducted according to WHS requirements and workplaceprocedures, and sample products are checked 
Machining tools are maintained according to workplace procedures 
Stock levels of machining tools are reviewed and action taken to avoid stock-out situations 
Stock levels of consumables are maintained to support continuity of operations 
Work area is cleaned, and materials disposed of or recycled according to workplace procedures 
Tools and equipment are cleaned, checked, maintained and stored according to workplace procedures 
Workplace documentation is completed according to workplace procedures 

Forms

Assessment Cover Sheet

AUMFTA003 - Set and adjust automotive production machine tools
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AUMFTA003 - Set and adjust automotive production machine tools

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: