Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AUMGQA001 Mapping and Delivery Guide
Apply workplace technical quality standards

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency AUMGQA001 - Apply workplace technical quality standards
Description
Employability Skills
Learning Outcomes and Application This unit describes the performance outcomes required to inspect completed vehicle production work against job specifications and workplace technical quality standards.It applies to those in an automotive workplace and involves the application of skills and knowledge at a technician level.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Manufacturing - Bus, Truck and Trailer
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for inspection
  • Workplace materials and equipment required for inspection processes are identified
  • Damaged or unserviceable equipment is identified, tagged and reported
  • Workplace instructions and quality guidelines are identified and applied
       
Element: Inspect work
  • Job specification, work order, inspection processes and quality standards are identified and applied
  • Workplace inspection processes are undertaken against work quality goals
  • Work health and safety (WHS) requirements are identified and followed
  • Workplace quality standards are applied when conducting inspections, according to workplace procedures
  • Workplace materials and equipment are protected against damage during inspection, according to workplace instructions and quality guidelines
       
Element: Complete work processes
  • Completed work is inspected to ensure quality outcomes against job specifications, and the achievement of customer requirements
  • Work sheets and quality reports are completed and reported
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Prepare for inspection

1.1 Workplace materials and equipment required for inspection processes are identified

1.2 Damaged or unserviceable equipment is identified, tagged and reported

1.3 Workplace instructions and quality guidelines are identified and applied

2. Inspect work

2.1 Job specification, work order, inspection processes and quality standards are identified and applied

2.2 Workplace inspection processes are undertaken against work quality goals

2.3 Work health and safety (WHS) requirements are identified and followed

2.4 Workplace quality standards are applied when conducting inspections, according to workplace procedures

2.5 Workplace materials and equipment are protected against damage during inspection, according to workplace instructions and quality guidelines

3. Complete work processes

3.1 Completed work is inspected to ensure quality outcomes against job specifications, and the achievement of customer requirements

3.1 Work sheets and quality reports are completed and reported


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Prepare for inspection

1.1 Workplace materials and equipment required for inspection processes are identified

1.2 Damaged or unserviceable equipment is identified, tagged and reported

1.3 Workplace instructions and quality guidelines are identified and applied

2. Inspect work

2.1 Job specification, work order, inspection processes and quality standards are identified and applied

2.2 Workplace inspection processes are undertaken against work quality goals

2.3 Work health and safety (WHS) requirements are identified and followed

2.4 Workplace quality standards are applied when conducting inspections, according to workplace procedures

2.5 Workplace materials and equipment are protected against damage during inspection, according to workplace instructions and quality guidelines

3. Complete work processes

3.1 Completed work is inspected to ensure quality outcomes against job specifications, and the achievement of customer requirements

3.1 Work sheets and quality reports are completed and reported

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Work quality goals must include:

identification and elimination of defects

attention to job specifications and tolerances

efficient production times.

Workplace proceduresmust include:

continuous improvement standards

quality standards

recording and reporting.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Workplace materials and equipment required for inspection processes are identified 
Damaged or unserviceable equipment is identified, tagged and reported 
Workplace instructions and quality guidelines are identified and applied 
Job specification, work order, inspection processes and quality standards are identified and applied 
Workplace inspection processes are undertaken against work quality goals 
Work health and safety (WHS) requirements are identified and followed 
Workplace quality standards are applied when conducting inspections, according to workplace procedures 
Workplace materials and equipment are protected against damage during inspection, according to workplace instructions and quality guidelines 
Completed work is inspected to ensure quality outcomes against job specifications, and the achievement of customer requirements 
Work sheets and quality reports are completed and reported 

Forms

Assessment Cover Sheet

AUMGQA001 - Apply workplace technical quality standards
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

AUMGQA001 - Apply workplace technical quality standards

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: