Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AUMGTA002 Mapping and Delivery Guide
Service vehicle after assembly

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency AUMGTA002 - Service vehicle after assembly
Description
Employability Skills
Learning Outcomes and Application This unit describes the performance outcomes required to service vehicles after their assembly by applying lubricants and fluids and bleeding their air and hydraulic systems.It applies to those in an automotive manufacturing environment and involves the application of skills and knowledge at a production worker level.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Manufacturing - Bus, Truck and Trailer
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for work
  • Vehicle service requirements are identified from work orders
  • Tools, equipment and materials are selected and checked to ensure they are in good working order and meet job requirements
       
Element: .2 Tools, equipment and work area are cleaned and maintained, and faulty equipment is identified, tagged and reported according to workplace procedures
  • Waste and used materials are disposed of, reused or recycled according to workplace procedures and product specifications
  • Service checklists and workplace material lists are completed according to workplace procedures
       
Element: Select and use lubricants and fluids
  • Select and match lubricants and fluids to vehicle specifications, according to lubrication and fluid data sheets
  • Use lubricants and fluids on the identified parts
  • Fill reservoirs and mechanical assemblies to specified levels
       
Element: Bleed air and hydraulic systems
  • Identify bleeding points for air and hydraulic systems from specification sheets
  • Bleed air and hydraulic systems according to workplace procedures and manufacturer specifications
       
Element: Complete work processes
  • Identify and report faults to appropriate personnel
  • Clean and maintain tools, equipment and work area, identifying, tagging and reporting faulty equipment according to workplace procedures
  • Dispose of waste and used materials, ensuring they are disposed of, reused or recycled according to workplace procedures and product specifications
  • Complete service checklists and workplace material lists according to workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Prepare for work

1.1 Vehicle service requirements are identified from work orders

1.2 Tools, equipment and materials are selected and checked to ensure they are in good working order and meet job requirements

2. Select and use lubricants and fluids

2.1 Lubricants and fluids are selected and matched to vehicle specifications, according to lubrication and fluid data sheets

2.2 Lubricants and fluids are used on the identified parts

2.3 Reservoirs and mechanical assemblies are filled to specified levels

3. Bleed air and hydraulic systems

3.1 Bleeding points for air and hydraulic systems are identified from specification sheets

3.2 Air and hydraulic systems are bled according to workplace procedures and manufacturer specifications

4. Complete work processes

4.1 Faults are identified and reported to appropriate personnel

4..2 Tools, equipment and work area are cleaned and maintained, and faulty equipment is identified, tagged and reported according to workplace procedures

4.3 Waste and used materials are disposed of, reused or recycled according to workplace procedures and product specifications

4.4 Service checklists and workplace material lists are completed according to workplace procedures


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Prepare for work

1.1 Vehicle service requirements are identified from work orders

1.2 Tools, equipment and materials are selected and checked to ensure they are in good working order and meet job requirements

2. Select and use lubricants and fluids

2.1 Lubricants and fluids are selected and matched to vehicle specifications, according to lubrication and fluid data sheets

2.2 Lubricants and fluids are used on the identified parts

2.3 Reservoirs and mechanical assemblies are filled to specified levels

3. Bleed air and hydraulic systems

3.1 Bleeding points for air and hydraulic systems are identified from specification sheets

3.2 Air and hydraulic systems are bled according to workplace procedures and manufacturer specifications

4. Complete work processes

4.1 Faults are identified and reported to appropriate personnel

4..2 Tools, equipment and work area are cleaned and maintained, and faulty equipment is identified, tagged and reported according to workplace procedures

4.3 Waste and used materials are disposed of, reused or recycled according to workplace procedures and product specifications

4.4 Service checklists and workplace material lists are completed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Lubricants and fluids must include:

greases

oils

special fluids.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Vehicle service requirements are identified from work orders 
Tools, equipment and materials are selected and checked to ensure they are in good working order and meet job requirements 
Waste and used materials are disposed of, reused or recycled according to workplace procedures and product specifications 
Service checklists and workplace material lists are completed according to workplace procedures 
Select and match lubricants and fluids to vehicle specifications, according to lubrication and fluid data sheets 
Use lubricants and fluids on the identified parts 
Fill reservoirs and mechanical assemblies to specified levels 
Identify bleeding points for air and hydraulic systems from specification sheets 
Bleed air and hydraulic systems according to workplace procedures and manufacturer specifications 
Identify and report faults to appropriate personnel 
Clean and maintain tools, equipment and work area, identifying, tagging and reporting faulty equipment according to workplace procedures 
Dispose of waste and used materials, ensuring they are disposed of, reused or recycled according to workplace procedures and product specifications 
Complete service checklists and workplace material lists according to workplace procedures 

Forms

Assessment Cover Sheet

AUMGTA002 - Service vehicle after assembly
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

AUMGTA002 - Service vehicle after assembly

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: