Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AUMGTM001 Mapping and Delivery Guide
Assemble vehicle components

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency AUMGTM001 - Assemble vehicle components
Description
Employability Skills
Learning Outcomes and Application This unit describes the performance outcomes required to prepare and assemble vehicle components according to work order instructions and job specifications.It applies to those in an automotive environment and involves the application of skills and knowledge at a production worker level.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Manufacturing - Bus, Truck and Trailer
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare
  • Work orders are reviewed to identify parts and materials to be assembled
  • Parts and materials are dispatched to assembly area
  • Details of parts and materials are recorded for stock control
  • Tools and equipment are selected and inspected and faults reported
       
Element: Load parts onto assembly jigs
  • Workplace procedures are identified and followed
  • Parts are loaded onto assembly jig according to workplace instructions
  • Parts are aligned and clamped according to workplace instructions
       
Element: Select and use adhesives, sealants, solvents and fasteners
  • Adhesives and sealants are selected as per work order requirements
  • Solvents are selected and used to remove excess adhesives and sealants
  • Fasteners are identified, selected and fitted to component according to work order instructions
       
Element: Produce finished product
  • Parts are positioned and secured according to job specifications
  • Fasteners are tensioned to job specifications
  • Assemblies are inspected for quality and checked against job specifications
       
Element: Complete work processes
  • Work area, tools and equipment are cleaned, checked and stored according to workplace procedures
  • Faulty equipment is identified, tagged and reported
  • Waste material is collected, recycled or disposed of according to workplace procedures
  • Work sheets are completed according to workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare

1.1 Work orders are reviewed to identify parts and materials to be assembled

1.2 Parts and materials are dispatched to assembly area

1.3 Details of parts and materials are recorded for stock control

1.4 Tools and equipment are selected and inspected and faults reported

2. Load parts onto assembly jigs

2.1 Workplace procedures are identified and followed

2.2 Parts are loaded onto assembly jig according to workplace instructions

2.3 Parts are aligned and clamped according to workplace instructions

3. Select and use adhesives, sealants, solvents and fasteners

3.1 Adhesives and sealants are selected as per work order requirements

3.2 Solvents are selected and used to remove excess adhesives and sealants

3.3 Fasteners are identified, selected and fitted to component according to work order instructions

4. Produce finished product

4.1 Parts are positioned and secured according to job specifications

4.2 Fasteners are tensioned to job specifications

4.3 Assemblies are inspected for quality and checked against job specifications

5. Complete work processes

5.1 Work area, tools and equipment are cleaned, checked and stored according to workplace procedures

5.2 Faulty equipment is identified, tagged and reported

5.3 Waste material is collected, recycled or disposed of according to workplace procedures

5.4 Work sheets are completed according to workplace procedures

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare

1.1 Work orders are reviewed to identify parts and materials to be assembled

1.2 Parts and materials are dispatched to assembly area

1.3 Details of parts and materials are recorded for stock control

1.4 Tools and equipment are selected and inspected and faults reported

2. Load parts onto assembly jigs

2.1 Workplace procedures are identified and followed

2.2 Parts are loaded onto assembly jig according to workplace instructions

2.3 Parts are aligned and clamped according to workplace instructions

3. Select and use adhesives, sealants, solvents and fasteners

3.1 Adhesives and sealants are selected as per work order requirements

3.2 Solvents are selected and used to remove excess adhesives and sealants

3.3 Fasteners are identified, selected and fitted to component according to work order instructions

4. Produce finished product

4.1 Parts are positioned and secured according to job specifications

4.2 Fasteners are tensioned to job specifications

4.3 Assemblies are inspected for quality and checked against job specifications

5. Complete work processes

5.1 Work area, tools and equipment are cleaned, checked and stored according to workplace procedures

5.2 Faulty equipment is identified, tagged and reported

5.3 Waste material is collected, recycled or disposed of according to workplace procedures

5.4 Work sheets are completed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Workplace procedures must include:

recording and reporting

use and maintenance of equipment

work health and safety (WHS) requirements to assemble components

work instructions required to assemble components.

Fasteners must include:

clips, pins and clamps

nuts and bolts

screws.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work orders are reviewed to identify parts and materials to be assembled 
Parts and materials are dispatched to assembly area 
Details of parts and materials are recorded for stock control 
Tools and equipment are selected and inspected and faults reported 
Workplace procedures are identified and followed 
Parts are loaded onto assembly jig according to workplace instructions 
Parts are aligned and clamped according to workplace instructions 
Adhesives and sealants are selected as per work order requirements 
Solvents are selected and used to remove excess adhesives and sealants 
Fasteners are identified, selected and fitted to component according to work order instructions 
Parts are positioned and secured according to job specifications 
Fasteners are tensioned to job specifications 
Assemblies are inspected for quality and checked against job specifications 
Work area, tools and equipment are cleaned, checked and stored according to workplace procedures 
Faulty equipment is identified, tagged and reported 
Waste material is collected, recycled or disposed of according to workplace procedures 
Work sheets are completed according to workplace procedures 

Forms

Assessment Cover Sheet

AUMGTM001 - Assemble vehicle components
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AUMGTM001 - Assemble vehicle components

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: