Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AUMGTR003 Mapping and Delivery Guide
Test, modify and repair vehicle electrical circuits and systems

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency AUMGTR003 - Test, modify and repair vehicle electrical circuits and systems
Description
Employability Skills
Learning Outcomes and Application This unit describes the performance outcomes required to test, modify and repair electrical circuits and systems in vehicles.It applies to those in an automotive manufacturing environment and involves the application of skills and knowledge at a specialist level.Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Manufacturing - Bus, Truck and Trailer
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for work
  • Workplace instructions are identified to determine job requirements
  • Tools and materials are identified for effective modification and repairs to electrical circuits and systems
       
Element: Test electrical circuits and identify faults
       
Element: Workplace procedures are identified and followed
  • Testing procedures are carried out according to job requirements and manufacturer specifications
  • Faults are determined using appropriate tools and techniques
  • Faults are identified and repair options planned
       
Element: Complete modifications and repairs
  • Modifications and repairs to electrical circuits and systems are carried out according to work orders and manufacturer specifications
  • Wiring and electrical circuits are modified or repaired using appropriate tools and equipment and without causing damage to components or system
  • Wiring and electrical circuits are tested for correct operation according to manufacturer specifications and workplace procedures
       
Element: Finish the job
  • Final inspection is made to ensure work is to workplace quality standards
  • Tools and equipment are checked and stored according to workplace procedures
  • Faulty equipment is identified, tagged and reported
  • Work sheets and test result documents are completed according to workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Prepare for work

1.1 Workplace instructions are identified to determine job requirements

1.2 Tools and materials are identified for effective modification and repairs to electrical circuits and systems

2. Test electrical circuits and identify faults

2.1Workplace procedures are identified and followed

2.2 Testing procedures are carried out according to job requirements and manufacturer specifications

2.3 Faults are determined using appropriate tools and techniques

2.4 Faults are identified and repair options planned

3. Complete modifications and repairs

3.1 Modifications and repairs to electrical circuits and systems are carried out according to work orders and manufacturer specifications

3.2 Wiring and electrical circuits are modified or repaired using appropriate tools and equipment and without causing damage to components or system

3.3 Wiring and electrical circuits are tested for correct operation according to manufacturer specifications and workplace procedures

4. Finish the job

4.1 Final inspection is made to ensure work is to workplace quality standards

4.2 Tools and equipment are checked and stored according to workplace procedures

4.3 Faulty equipment is identified, tagged and reported

4.4 Work sheets and test result documents are completed according to workplace procedures

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Prepare for work

1.1 Workplace instructions are identified to determine job requirements

1.2 Tools and materials are identified for effective modification and repairs to electrical circuits and systems

2. Test electrical circuits and identify faults

2.1Workplace procedures are identified and followed

2.2 Testing procedures are carried out according to job requirements and manufacturer specifications

2.3 Faults are determined using appropriate tools and techniques

2.4 Faults are identified and repair options planned

3. Complete modifications and repairs

3.1 Modifications and repairs to electrical circuits and systems are carried out according to work orders and manufacturer specifications

3.2 Wiring and electrical circuits are modified or repaired using appropriate tools and equipment and without causing damage to components or system

3.3 Wiring and electrical circuits are tested for correct operation according to manufacturer specifications and workplace procedures

4. Finish the job

4.1 Final inspection is made to ensure work is to workplace quality standards

4.2 Tools and equipment are checked and stored according to workplace procedures

4.3 Faulty equipment is identified, tagged and reported

4.4 Work sheets and test result documents are completed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Tools and materials must include:

electrical components, wiring, clips, globes, fuses and tapes

hand tools, test lamps and multimeters

soldering equipment.

Workplace procedures must include:

procedures for recording and reporting the testing, modification and repair of electrical circuits and systems

use of tools and equipment for testing, modifying and repairing vehicle electrical circuits and systems

WHS requirements for testing, modifying and repairing vehicle electrical circuits and systems

workplace quality standards relevant to testing, modifying and repairing vehicle electrical circuits and systems.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Workplace instructions are identified to determine job requirements 
Tools and materials are identified for effective modification and repairs to electrical circuits and systems 
 
Testing procedures are carried out according to job requirements and manufacturer specifications 
Faults are determined using appropriate tools and techniques 
Faults are identified and repair options planned 
Modifications and repairs to electrical circuits and systems are carried out according to work orders and manufacturer specifications 
Wiring and electrical circuits are modified or repaired using appropriate tools and equipment and without causing damage to components or system 
Wiring and electrical circuits are tested for correct operation according to manufacturer specifications and workplace procedures 
Final inspection is made to ensure work is to workplace quality standards 
Tools and equipment are checked and stored according to workplace procedures 
Faulty equipment is identified, tagged and reported 
Work sheets and test result documents are completed according to workplace procedures 

Forms

Assessment Cover Sheet

AUMGTR003 - Test, modify and repair vehicle electrical circuits and systems
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AUMGTR003 - Test, modify and repair vehicle electrical circuits and systems

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: