Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AUMGTS003 Mapping and Delivery Guide
Fabricate plugs

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency AUMGTS003 - Fabricate plugs
Description
Employability Skills
Learning Outcomes and Application This unit describes the performance outcomes required to fabricate a plug for fibreglass components.It applies to those in an automotive manufacturing environment and involves the application of skills and knowledge at a specialist level.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Manufacturing - Bus, Truck and Trailer
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan for fabrication
  • Work order and job specifications are identified and job requirements and plug material are confirmed
  • Equipment for fabrication of plug is selected and checked for safe operation
  • Plug shape is established and plug dimensions are determined from job specifications
       
Element: Shape material for plug
  • Workplace procedures are identified and followed during the shaping activities
  • Plug templates and patterns are identified and produced from selected materials
  • Plug material is cut and prepared according to job specifications
  • Material surface is shaped using fabrication equipment
  • Plug dimensions are checked against template and job specifications
       
Element: Complete work processes
  • Plug is finished according to workplace procedures and job requirements
  • Work area and equipment are cleaned, inspected and maintained according to workplace procedures
  • Waste material is collected and recycled or disposed of according to workplace procedures
  • Faulty equipment is identified, tagged and reported
  • Job sheets are completed and reported to appropriate personnel
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan for fabrication

1.1 Work order and job specifications are identified and job requirements and plug material are confirmed

1.2 Equipment for fabrication of plug is selected and checked for safe operation

1.3 Plug shape is established and plug dimensions are determined from job specifications

2. Shape material for plug

2.1 Workplace procedures are identified and followed during the shaping activities

2.2 Plug templates and patterns are identified and produced from selected materials

2.3 Plug material is cut and prepared according to job specifications

2.4 Material surface is shaped using fabrication equipment

2.5 Plug dimensions are checked against template and job specifications

3. Complete work processes

3.1 Plug is finished according to workplace procedures and job requirements

3.2 Work area and equipment are cleaned, inspected and maintained according to workplace procedures

3.3 Waste material is collected and recycled or disposed of according to workplace procedures

3.4 Faulty equipment is identified, tagged and reported

3.5 Job sheets are completed and reported to appropriate personnel

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan for fabrication

1.1 Work order and job specifications are identified and job requirements and plug material are confirmed

1.2 Equipment for fabrication of plug is selected and checked for safe operation

1.3 Plug shape is established and plug dimensions are determined from job specifications

2. Shape material for plug

2.1 Workplace procedures are identified and followed during the shaping activities

2.2 Plug templates and patterns are identified and produced from selected materials

2.3 Plug material is cut and prepared according to job specifications

2.4 Material surface is shaped using fabrication equipment

2.5 Plug dimensions are checked against template and job specifications

3. Complete work processes

3.1 Plug is finished according to workplace procedures and job requirements

3.2 Work area and equipment are cleaned, inspected and maintained according to workplace procedures

3.3 Waste material is collected and recycled or disposed of according to workplace procedures

3.4 Faulty equipment is identified, tagged and reported

3.5 Job sheets are completed and reported to appropriate personnel

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Plug material must include:

aluminium and sheet steel

plastic filler

timber.

Equipment must include:

hand tools appropriate for fabricating plugs

metal shaping equipment

woodworking tools.

Workplace procedures must include:

procedures for recording and reporting the fabrication of plugs

use of tools and equipment required to fabricate plugs

work health and safety (WHS) requirements for fabricating plugs

workplace quality standards relevant to fabricating plugs.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work order and job specifications are identified and job requirements and plug material are confirmed 
Equipment for fabrication of plug is selected and checked for safe operation 
Plug shape is established and plug dimensions are determined from job specifications 
Workplace procedures are identified and followed during the shaping activities 
Plug templates and patterns are identified and produced from selected materials 
Plug material is cut and prepared according to job specifications 
Material surface is shaped using fabrication equipment 
Plug dimensions are checked against template and job specifications 
Plug is finished according to workplace procedures and job requirements 
Work area and equipment are cleaned, inspected and maintained according to workplace procedures 
Waste material is collected and recycled or disposed of according to workplace procedures 
Faulty equipment is identified, tagged and reported 
Job sheets are completed and reported to appropriate personnel 

Forms

Assessment Cover Sheet

AUMGTS003 - Fabricate plugs
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AUMGTS003 - Fabricate plugs

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: