Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AUMGTT001 Mapping and Delivery Guide
Apply trim to vehicle components

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency AUMGTT001 - Apply trim to vehicle components
Description
Employability Skills
Learning Outcomes and Application This unit describes the performance outcomes required to measure, cut and attach trim materials to vehicle components.It applies to those in an automotive manufacturing environment and involves the application of skills and knowledge at a production worker level.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Manufacturing - Bus, Truck and Trailer
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare
  • Work orders, job specifications and working drawings are identified, interpreted and confirmed
  • Trim materials, tools and equipment are selected and inspected, and faults repaired or reported
       
Element: Match materials
  • Trim materials are matched, measured and cut according to job specifications and workplace procedures
  • Material characteristics are identified and selected for use
  • Attaching or bonding informationis identified and interpreted from appropriate sources
       
Element: Attach materials
  • Workplace procedures are identified and followed
  • Trim materials are pre-fitted and checked for alignment, appearance and quality according to job specifications
  • Trim materials are attached to components by approved methods
       
Element: Complete work processes
  • Tools and equipment are cleaned, inspected and stored according to workplace procedures
  • Faulty equipment is identified, reported and tagged
  • Work areas are cleaned, and unused materials stored
  • Waste materials are removed and disposed of or recycled according to workplace environmental procedures
  • Work sheets are completed according to workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare

1.1 Work orders, job specifications and working drawings are identified, interpreted and confirmed

1.2 Trim materials, tools and equipment are selected and inspected, and faults repaired or reported

2. Match materials

2.1 Trim materials are matched, measured and cut according to job specifications and workplace procedures

2.2 Material characteristics are identified and selected for use

2.3 Attaching or bonding informationis identified and interpreted from appropriate sources

3. Attach materials

3.1 Workplace procedures are identified and followed

3.2 Trim materials are pre-fitted and checked for alignment, appearance and quality according to job specifications

3.3 Trim materials are attached to components by approved methods

4. Complete work processes

4.1 Tools and equipment are cleaned, inspected and stored according to workplace procedures

4.2 Faulty equipment is identified, reported and tagged

4.3 Work areas are cleaned, and unused materials stored

4.4 Waste materials are removed and disposed of or recycled according to workplace environmental procedures

4.5 Work sheets are completed according to workplace procedures


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Plan and prepare

1.1 Work orders, job specifications and working drawings are identified, interpreted and confirmed

1.2 Trim materials, tools and equipment are selected and inspected, and faults repaired or reported

2. Match materials

2.1 Trim materials are matched, measured and cut according to job specifications and workplace procedures

2.2 Material characteristics are identified and selected for use

2.3 Attaching or bonding informationis identified and interpreted from appropriate sources

3. Attach materials

3.1 Workplace procedures are identified and followed

3.2 Trim materials are pre-fitted and checked for alignment, appearance and quality according to job specifications

3.3 Trim materials are attached to components by approved methods

4. Complete work processes

4.1 Tools and equipment are cleaned, inspected and stored according to workplace procedures

4.2 Faulty equipment is identified, reported and tagged

4.3 Work areas are cleaned, and unused materials stored

4.4 Waste materials are removed and disposed of or recycled according to workplace environmental procedures

4.5 Work sheets are completed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Appropriate sources must include:

customer requirements

material and product specifications.

Workplace procedures must include:

procedures for recording and reporting the application of trim to vehicle components

use of tools and equipment for applying trim to vehicle components

WHS requirements for applying trim to vehicle components

workplace quality standards relevant to applying trim to vehicle components.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work orders, job specifications and working drawings are identified, interpreted and confirmed 
Trim materials, tools and equipment are selected and inspected, and faults repaired or reported 
Trim materials are matched, measured and cut according to job specifications and workplace procedures 
Material characteristics are identified and selected for use 
Attaching or bonding informationis identified and interpreted from appropriate sources 
Workplace procedures are identified and followed 
Trim materials are pre-fitted and checked for alignment, appearance and quality according to job specifications 
Trim materials are attached to components by approved methods 
Tools and equipment are cleaned, inspected and stored according to workplace procedures 
Faulty equipment is identified, reported and tagged 
Work areas are cleaned, and unused materials stored 
Waste materials are removed and disposed of or recycled according to workplace environmental procedures 
Work sheets are completed according to workplace procedures 

Forms

Assessment Cover Sheet

AUMGTT001 - Apply trim to vehicle components
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

AUMGTT001 - Apply trim to vehicle components

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: