AURBTR002 - Install and adjust bicycle electronic gear shifters Competency Mapping Template

Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AURBTR002 Mapping and Delivery Guide
Install and adjust bicycle electronic gear shifters

Version 1.0
Issue Date: April 2024

Qualification	-	Unit of Competency	AURBTR002 - Install and adjust bicycle electronic gear shifters
Description
Employability Skills
Learning Outcomes and Application	This unit describes the performance outcomes required to install and adjust electronic gear shifters on bicycles. It involves preparing for the work, selecting components, selecting and using specialist tools and equipment, interpreting fitting instructions, assembling components to bicycles, testing electronic gear shifters according to manufacturer instructions and specifications, and completing workplace processes and documentation. It applies to those working in the bicycle retail, service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Duration and Setting	X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting. Assessors must satisfy NVR/AQTF assessor requirements. Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting. Assessment must include direct observation of tasks. Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the bicycle electronic gear shifters they have installed and adjusted, e.g. repair orders. Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application. The following resources must be made available: bicycle workplace or simulated workplace, including location to test bicycle electronic gear shifters workplace instructions detailing job requirements manufacturer fitting instructions and specifications PPE required to install and adjust bicycle electronic gear shifting components bicycle electronic gear shifting components two different bicycles requiring the installation and adjustment of electronic gear shifting components tools and equipment appropriate for installing and adjusting bicycle electronic gear shifters.
Prerequisites/co-requisites
Competency Field	Bicycles

Development and validation strategy and guide for assessors and learners		Student Learning Resources	Handouts Activities	Slides PPT	Assessment 1	Assessment 2	Assessment 3	Assessment 4
Elements of Competency	Performance Criteria
Element: Prepare to install electronic gear shifting components	Job requirements are determined from workplace instructions Electronic gear shifter fitting instructions and specifications are sourced and interpreted Electronic gear shifting unit is identified and selected Hazards associated with the work are identified and risks are managed Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability Work is planned and procedures are determined to minimise waste and use time efficiently
Element: Install electronic gear shifting components	Electronic gear shifting components are identified and checked for damage or missing parts according to manufacturer specifications and parts lists Replacement options and techniques are identified and confirmed Electric cables are installed according to fitting instructions, workplace procedures,and safety and environmental requirements Electronic front junction control boxes and battery are installed according to component manufacturer specifications Handle bar brake levers and shifters are fitted and electric cables connected using manufacturer specialist tools Front and rear derailleurs are fitted and electric cables connected using manufacturer specialist tools Electric cables are secured according to manufacturer specifications and workplace procedures
Element: Adjust electronic rear derailleur gear shifting components	Control device on junction box is activated to allow adjustments to be made Chain is positioned on front and rear gear rings according to manufacturer specifications Rear derailleur adjustment controls are operated until chain runs smoothly Control device on junction box is returned to operational shift mode according to manufacturer specifications Rear derailleur operation is checked to ensure it operates according to manufacturer specifications
Element: Complete work processes	Final inspection is made to ensure work is to workplace expectations and bicycle is presented ready for use Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored Tools and equipment are checked, reported if faulty, and stored according to workplace procedures Workplace documentation is processed according to workplace procedures
Element: Prepare to install electronic gear shifting components	Job requirements are determined from workplace instructions Electronic gear shifter fitting instructions and specifications are sourced and interpreted Electronic gear shifting unit is identified and selected Hazards associated with the work are identified and risks are managed Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability Work is planned and procedures are determined to minimise waste and use time efficiently
Element: Install electronic gear shifting components	Electronic gear shifting components are identified and checked for damage or missing parts according to manufacturer specifications and parts lists Replacement options and techniques are identified and confirmed Electric cables are installed according to fitting instructions, workplace procedures,and safety and environmental requirements Electronic front junction control boxes and battery are installed according to component manufacturer specifications Handle bar brake levers and shifters are fitted and electric cables connected using manufacturer specialist tools Front and rear derailleurs are fitted and electric cables connected using manufacturer specialist tools Electric cables are secured according to manufacturer specifications and workplace procedures
Element: Adjust electronic rear derailleur gear shifting components	Control device on junction box is activated to allow adjustments to be made Chain is positioned on front and rear gear rings according to manufacturer specifications Rear derailleur adjustment controls are operated until chain runs smoothly Control device on junction box is returned to operational shift mode according to manufacturer specifications Rear derailleur operation is checked to ensure it operates according to manufacturer specifications
Element: Complete work processes	Final inspection is made to ensure work is to workplace expectations and bicycle is presented ready for use Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored Tools and equipment are checked, reported if faulty, and stored according to workplace procedures Workplace documentation is processed according to workplace procedures

Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to install electronic gear shifting components

1.1 Job requirements are determined from workplace instructions

1.2 Electronic gear shifter fitting instructions and specifications are sourced and interpreted

1.3 Electronic gear shifting unit is identified and selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

1.6 Work is planned and procedures are determined to minimise waste and use time efficiently

2. Install electronic gear shifting components

2.1 Electronic gear shifting components are identified and checked for damage or missing parts according to manufacturer specifications and parts lists

2.2 Replacement options and techniques are identified and confirmed

2.3 Electric cables are installed according to fitting instructions, workplace procedures,and safety and environmental requirements

2.4 Electronic front junction control boxes and battery are installed according to component manufacturer specifications

2.5 Handle bar brake levers and shifters are fitted and electric cables connected using manufacturer specialist tools

2.6 Front and rear derailleurs are fitted and electric cables connected using manufacturer specialist tools

2.7 Electric cables are secured according to manufacturer specifications and workplace procedures

3. Adjust electronic rear derailleur gear shifting components

3.1 Control device on junction box is activated to allow adjustments to be made

3.2 Chain is positioned on front and rear gear rings according to manufacturer specifications

3.3 Rear derailleur adjustment controls are operated until chain runs smoothly

3.4 Control device on junction box is returned to operational shift mode according to manufacturer specifications

3.5 Rear derailleur operation is checked to ensure it operates according to manufacturer specifications

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and bicycle is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unitâ€™s elements, performance criteria, range of conditions and foundation skills:

install and adjust electronic gear shifting components on two different bicycles.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to installing and adjusting bicycle electronic gear shifters, including procedures for:

manually handling bicycles and gear shifters

identifying workplace hazards

using tools and equipment, including personal protective equipment (PPE)

environmental requirements, including procedures for disposing of waste materials

key bicycle terminology relating to electronic gear shifting components

purpose and features of bicycle electronic gear shifting systems

principles of electronic gear shifting operation

types and use of tools and equipment used to install and adjust bicycle electronic gear shifters

techniques and processes for installing and adjusting bicycle electronic gear shifting components, including:

identification of bicycle electronic gear shifter components, materials and specifications

fault and damage identification

measuring techniques

electronic gear shifter adjustment techniques

electronic gear shifter testing procedures

methods of protecting bicycles from damage when installing and adjusting bicycle electronic gear shifting components.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title] Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.