Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AURETR005 Mapping and Delivery Guide
Install automotive security systems and components

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency AURETR005 - Install automotive security systems and components
Description
Employability Skills
Learning Outcomes and Application This unit describes the performance outcomes required to install and test automotive security systems and components in vehicles or machinery. It involves preparing for the task, installing and testing system and component operation, and completing workplace processes and documentation. The security systems and components will not require programming following installation as they do not communicate with the vehicle or machinery controller area network databus (CAN-bus or LIN-bus) topography.It applies to those working in the automotive service and repair industry. The electrical security systems and components include those being installed in agricultural machinery, heavy commercial vehicles, light vehicles, vessels, mobile plant machinery, motorcycles or outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must satisfy NVR/AQTF assessor requirements.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessment must include direct observation of tasks.

Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the automotive security systems and components that they have installed in vehicles, vessels or machinery, e.g. work orders.

Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.

The following resources must be made available:

automotive repair workplace or simulated workplace

workplace instructions

wiring specifications relevant to vehicle, vessel or machinery systems and components being installed

two different vehicles, vessels or machinery requiring the installation of security systems and components

tools, equipment and materials appropriate for installing automotive security systems and components.

Prerequisites/co-requisites
Competency Field Electrical
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to install security system and components
  • Job requirements are determined according to workplace instructions
  • Manufacturer specifications and installation fitting instructions are accessed and interpreted
  • Installation options are analysed and those most appropriate to the circumstances are selected
  • Hazards associated with the work are identified and risks are managed
  • Tools and equipment are selected and checked for serviceability
       
Element: Install and test security system and components
  • Security system and components are checked for correct application and damage
  • Security system is installed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
  • Installed system and components are tested for correct operation according to workplace procedures and manufacturer specifications
  • Post-installation testing of other electrical systems is carried out according to workplace procedures to confirm correct operation, and any problems detected as having been introduced during the installation process are rectified
       
Element: Complete work processes
  • Final inspection is made to ensure work is to workplace expectations and vehicle, vessel or machinery is presented ready for use
  • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
  • Workplace documentation is processed according to workplace procedures
       
Element: Prepare to install security system and components
  • Job requirements are determined according to workplace instructions
  • Manufacturer specifications and installation fitting instructions are accessed and interpreted
  • Installation options are analysed and those most appropriate to the circumstances are selected
  • Hazards associated with the work are identified and risks are managed
  • Tools and equipment are selected and checked for serviceability
       
Element: Install and test security system and components
  • Security system and components are checked for correct application and damage
  • Security system is installed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
  • Installed system and components are tested for correct operation according to workplace procedures and manufacturer specifications
  • Post-installation testing of other electrical systems is carried out according to workplace procedures to confirm correct operation, and any problems detected as having been introduced during the installation process are rectified
       
Element: Complete work processes
  • Final inspection is made to ensure work is to workplace expectations and vehicle, vessel or machinery is presented ready for use
  • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
  • Workplace documentation is processed according to workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to install security system and components

1.1 Job requirements are determined according to workplace instructions

1.2 Manufacturer specifications and installation fitting instructions are accessed and interpreted

1.3 Installation options are analysed and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools and equipment are selected and checked for serviceability

2. Install and test security system and components

2.1 Security system and components are checked for correct application and damage

2.2 Security system is installed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems

2.3 Installed system and components are tested for correct operation according to workplace procedures and manufacturer specifications

2.4 Post-installation testing of other electrical systems is carried out according to workplace procedures to confirm correct operation, and any problems detected as having been introduced during the installation process are rectified

3. Complete work processes

3.1 Final inspection is made to ensure work is to workplace expectations and vehicle, vessel or machinery is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

3.3 Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in the unit’s elements, performance criteria, range of conditions and foundation skills:

install two of the following security systems and components on non controller area network databus (CAN-bus) systems in different vehicles, vessels or machinery, including:

security alarm systems

single point immobilisation (engine start inhibit)

tilt, impact and vibration shock alarm activation sensors

audible and visual alert alarm equipment

theft alert vehicle and equipment tracking systems.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to installing automotive security systems and components, including procedures for:

using specialised tools and equipment

selecting and using personal protective equipment (PPE)

identifying hazards and controlling risks associated with:

working on high voltage ignition systems

wearing jewellery while working around high current wiring systems

types and basic operation of automotive security systems, including:

complete vehicle or equipment security alarm systems

single point immobilisation (engine start inhibit)

dual point immobilisation (engine start inhibit and fuel shut-off)

tilt, impact and vibration shock alarm activation sensors

audible and visual alert alarm equipment

theft alert vehicle and equipment tracking systems

procedures for installing automotive security systems and components, including:

techniques for reading and interpreting technical information, wiring diagrams and graphic symbols

methods of determining wiring and connection type and size for system

methods of determining placement of components on vehicle or machinery

methods of connecting system and components to existing electrical system without causing damage or problems, including:

selecting and soldering wires

selecting and crimping terminals

removing and replacing connectors

removing and replacing existing electrical components

post-installation testing procedures of automotive security system and components, including procedures for:

checking full operation of installed system

checking operation of existing electrical systems.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to install security system and components

1.1 Job requirements are determined according to workplace instructions

1.2 Manufacturer specifications and installation fitting instructions are accessed and interpreted

1.3 Installation options are analysed and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools and equipment are selected and checked for serviceability

2. Install and test security system and components

2.1 Security system and components are checked for correct application and damage

2.2 Security system is installed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems

2.3 Installed system and components are tested for correct operation according to workplace procedures and manufacturer specifications

2.4 Post-installation testing of other electrical systems is carried out according to workplace procedures to confirm correct operation, and any problems detected as having been introduced during the installation process are rectified

3. Complete work processes

3.1 Final inspection is made to ensure work is to workplace expectations and vehicle, vessel or machinery is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

3.3 Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

using specialised tools and equipment

selecting and using personal protective equipment (PPE)

identifying hazards and controlling risks associated with:

working on high voltage ignition systems

wearing jewellery while working around high current wiring systems.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Job requirements are determined according to workplace instructions 
Manufacturer specifications and installation fitting instructions are accessed and interpreted 
Installation options are analysed and those most appropriate to the circumstances are selected 
Hazards associated with the work are identified and risks are managed 
Tools and equipment are selected and checked for serviceability 
Security system and components are checked for correct application and damage 
Security system is installed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems 
Installed system and components are tested for correct operation according to workplace procedures and manufacturer specifications 
Post-installation testing of other electrical systems is carried out according to workplace procedures to confirm correct operation, and any problems detected as having been introduced during the installation process are rectified 
Final inspection is made to ensure work is to workplace expectations and vehicle, vessel or machinery is presented ready for use 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected 
Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures 
Workplace documentation is processed according to workplace procedures 
Job requirements are determined according to workplace instructions 
Manufacturer specifications and installation fitting instructions are accessed and interpreted 
Installation options are analysed and those most appropriate to the circumstances are selected 
Hazards associated with the work are identified and risks are managed 
Tools and equipment are selected and checked for serviceability 
Security system and components are checked for correct application and damage 
Security system is installed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems 
Installed system and components are tested for correct operation according to workplace procedures and manufacturer specifications 
Post-installation testing of other electrical systems is carried out according to workplace procedures to confirm correct operation, and any problems detected as having been introduced during the installation process are rectified 
Final inspection is made to ensure work is to workplace expectations and vehicle, vessel or machinery is presented ready for use 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected 
Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures 
Workplace documentation is processed according to workplace procedures 

Forms

Assessment Cover Sheet

AURETR005 - Install automotive security systems and components
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

AURETR005 - Install automotive security systems and components

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: