AURETR027 - Install ancillary electronic systems and components Competency Mapping Template

Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AURETR027 Mapping and Delivery Guide
Install ancillary electronic systems and components

Version 1.0
Issue Date: April 2024

Qualification	-	Unit of Competency	AURETR027 - Install ancillary electronic systems and components
Description
Employability Skills
Learning Outcomes and Application	This unit describes the performance outcomes required to install and test ancillary electronic systems and components in vehicles or machinery. It involves preparing for the task, installing and testing the operation of the systems and components, and completing workplace processes and documentation. These electronic systems and components may require programming following installation to enable them to communicate with the vehicle or machinery controller area network data bus (CAN-bus or LIN-bus) topography.It applies to those working in the automotive service and repair industry. Ancillary electronic systems and components include those being installed in agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, mobile plant machinery, motorcycles or outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Duration and Setting	X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting. Assessors must satisfy NVR/AQTF assessor requirements. Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting. Assessment must be by direct observation of tasks. Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the ancillary electronic systems and components that they have installed in vehicles or machinery, e.g. work orders. Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application. The following resources must be made available: automotive service and repair workplace or simulated workplace workplace instructions vehicle and machinery wiring specifications relevant to systems and components being installed manufacturer ancillary electronic system specifications two different vehicles or machinery requiring installation of ancillary electronic systems and components tools, equipment and materials appropriate for installing ancillary electronic systems and components.
Prerequisites/co-requisites
Competency Field	Electrical

Development and validation strategy and guide for assessors and learners		Student Learning Resources	Handouts Activities	Slides PPT	Assessment 1	Assessment 2	Assessment 3	Assessment 4
Elements of Competency	Performance Criteria
Element: Prepare to install ancillary electronic system and components	Job requirements are determined according to workplace instructions Manufacturer specifications and installation fitting instructions are sourced and interpreted Installation options are considered and those most appropriate to the circumstances are selected Hazards associated with the work are identified and risks are managed Tools, equipment and materials are selected and checked for serviceability
Element: Install and test ancillary electronic system and components	Electronic system and components are checked for correct application and damage Electronic equipment is installed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems Programming code is sought and interpreted, as required, to enable installed equipment to communicate with vehicle or machinery controller area network Installed system and components are tested for correct operation according to workplace procedures and manufacturer specifications Post-installation testing of other electrical and electronic systems is carried out according to workplace procedures to confirm correct operation, and any problems detected as having been introduced during the installation process are rectified
Element: Complete work processes	Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures Workplace documentation is processed according to workplace procedures
Element: Prepare to install ancillary electronic system and components	Job requirements are determined according to workplace instructions Manufacturer specifications and installation fitting instructions are sourced and interpreted Installation options are considered and those most appropriate to the circumstances are selected Hazards associated with the work are identified and risks are managed Tools, equipment and materials are selected and checked for serviceability
Element: Install and test ancillary electronic system and components	Electronic system and components are checked for correct application and damage Electronic equipment is installed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems Programming code is sought and interpreted, as required, to enable installed equipment to communicate with vehicle or machinery controller area network Installed system and components are tested for correct operation according to workplace procedures and manufacturer specifications Post-installation testing of other electrical and electronic systems is carried out according to workplace procedures to confirm correct operation, and any problems detected as having been introduced during the installation process are rectified
Element: Complete work processes	Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures Workplace documentation is processed according to workplace procedures

Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to install ancillary electronic system and components

1.1 Job requirements are determined according to workplace instructions

1.2 Manufacturer specifications and installation fitting instructions are sourced and interpreted

1.3 Installation options are considered and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools, equipment and materials are selected and checked for serviceability

2. Install and test ancillary electronic system and components

2.1 Electronic system and components are checked for correct application and damage

2.2 Electronic equipment is installed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems

2.3 Programming code is sought and interpreted, as required, to enable installed equipment to communicate with vehicle or machinery controller area network

2.4 Installed system and components are tested for correct operation according to workplace procedures and manufacturer specifications

2.5 Post-installation testing of other electrical and electronic systems is carried out according to workplace procedures to confirm correct operation, and any problems detected as having been introduced during the installation process are rectified

3. Complete work processes

3.1 Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

3.3 Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in the unitâ€™s elements and performance criteria, range of conditions and foundation skills:

install two ancillary electronic systems and components that require communication with the vehicle or machinery controller area network data bus (CAN-bus) topography of different vehicles.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to installing ancillary electronic systems and components, including procedures for:

using specialised tools and equipment

selecting and using appropriate personal protective equipment (PPE)

identifying hazards and controlling risks associated with:

working on high voltage ignition systems

wearing jewellery while working around high current wiring systems

types and basic operation of common ancillary electronic systems and components, including:

driver interlocks, including alcohol interlock devices

remote keyless entry systems

security alarm systems

audio systems

mobile phones

speed alert systems

navigation systems

reverse parking aids, including sensors, audible alerts and cameras

driver gauges and instruments

trailer harness connectors

types of vehicle and machinery communication networks, including:

controller area network (CAN)

local interconnect network (LIN)

media oriented systems transport (MOST)

types of communication network wiring, including:

single wire

two wire twisted pair

shielded wire

procedures for installing basic ancillary electronic systems and components, including:

techniques for reading and interpreting technical information, wiring diagrams and graphic symbols

methods of determining wiring and connection type and size for system

methods of determining placement of components on vehicle or machinery

methods of connecting system and components to existing electrical system without causing damage or problems, including:

selecting and soldering wires

selecting and crimping terminals

removing and replacing connectors

removing and replacing existing electrical components

procedures for sourcing and using programming code to allow communication between installed system and existing vehicle or machinery systems

post-installation testing procedures of basic ancillary electronic systems and components, including procedures for checking:

full operation of installed system

operation of existing electrical and electronic systems.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title] Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.