Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AURJTJ003 Mapping and Delivery Guide
Remove and refit motorcycle wheel and tyre assemblies

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency AURJTJ003 - Remove and refit motorcycle wheel and tyre assemblies
Description
Employability Skills
Learning Outcomes and Application This unit describes the performance outcomes required to remove and refit wheel and tyre assemblies fitted to motorcycles. It involves preparing for the work, removing and refitting the wheel and tyre assembly, and completing the workplace processes and documentation.It applies to those undertaking a Vocational Education and Training in Schools (VETiS) or pre-vocational qualification as preparation to entering the automotive service and repair or automotive manufacturing industry.The unit is designed for use in a highly supervised context and is not suitable for use in a vocational qualification.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must satisfy NVR/AQTF assessor requirements.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessment must include direct observation of tasks.

Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the motorcycle wheel and tyre assemblies that they have worked on, e.g. repair orders.

Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.

The following resources must be made available:

automotive workplace or simulated workplace

task instructions

manufacturer motorcycle wheel and tyre assembly specifications

one motorcycle

tools, equipment and materials appropriate for removing and refitting motorcycle wheel and tyre assemblies.
Prerequisites/co-requisites
Competency Field Mechanical - Motorcycle
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to remove wheel and tyre assembly
  • Environmental and safety requirements are sourced and interpreted
  • Task instruction is interpreted and wheel and tyre assembly to be worked on is identified
  • Manufacturer specifications for removing and replacing wheel and tyre assembly are sourced and interpreted
  • Potential hazards and risks associated with task are identified and reported to workplace supervisor
  • Tools and equipment required for removing and replacing wheel and tyre assembly are identified and checked for serviceability
       
Element: Remove wheel and tyre assembly
  • Motorcycle is prepared for wheel removal according to workplace procedures and safety requirements
  • Wheel and tyre assembly is removed according to workplace procedures and manufacturer specifications, and without causing damage to components, tools or equipment
  • Wheel and tyre assembly is identified according to manufacturer specifications
       
Element: Refit wheel and tyre assembly
  • Wheel and tyre assembly is prepared for replacement
  • Wheel and tyre assembly is replaced according to workplace procedures, manufacturer specifications and safety requirements, and without causing damage to components, tools or equipment
  • Wheel and tyre assembly on motorcycle is checked for correct operation
       
Element: Complete work processes
  • Final inspection is made to ensure work is to workplace expectations and motorcycle is presented ready for use
  • and recyclable material is collected
  • Tools and equipment are checked and stored according to workplace procedures
  • Workplace documentation is processed according to workplace procedures
       
Element: Prepare to remove wheel and tyre assembly
  • Environmental and safety requirements are sourced and interpreted
  • Task instruction is interpreted and wheel and tyre assembly to be worked on is identified
  • Manufacturer specifications for removing and replacing wheel and tyre assembly are sourced and interpreted
  • Potential hazards and risks associated with task are identified and reported to workplace supervisor
  • Tools and equipment required for removing and replacing wheel and tyre assembly are identified and checked for serviceability
       
Element: Remove wheel and tyre assembly
  • Motorcycle is prepared for wheel removal according to workplace procedures and safety requirements
  • Wheel and tyre assembly is removed according to workplace procedures and manufacturer specifications, and without causing damage to components, tools or equipment
  • Wheel and tyre assembly is identified according to manufacturer specifications
       
Element: Refit wheel and tyre assembly
  • Wheel and tyre assembly is prepared for replacement
  • Wheel and tyre assembly is replaced according to workplace procedures, manufacturer specifications and safety requirements, and without causing damage to components, tools or equipment
  • Wheel and tyre assembly on motorcycle is checked for correct operation
       
Element: Complete work processes
  • Final inspection is made to ensure work is to workplace expectations and motorcycle is presented ready for use
  • and recyclable material is collected
  • Tools and equipment are checked and stored according to workplace procedures
  • Workplace documentation is processed according to workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to remove wheel and tyre assembly

1.1 Environmental and safety requirements are sourced and interpreted

1.2 Task instruction is interpreted and wheel and tyre assembly to be worked on is identified

1.3 Manufacturer specifications for removing and replacing wheel and tyre assembly are sourced and interpreted

1.4 Potential hazards and risks associated with task are identified and reported to workplace supervisor

1.5 Tools and equipment required for removing and replacing wheel and tyre assembly are identified and checked for serviceability

2. Remove wheel and tyre assembly

2.1 Motorcycle is prepared for wheel removal according to workplace procedures and safety requirements

2.2 Wheel and tyre assembly is removed according to workplace procedures and manufacturer specifications, and without causing damage to components, tools or equipment

2.3 Wheel and tyre assembly is identified according to manufacturer specifications

3. Refit wheel and tyre assembly

3.1 Wheel and tyre assembly is prepared for replacement

3.2 Wheel and tyre assembly is replaced according to workplace procedures, manufacturer specifications and safety requirements, and without causing damage to components, tools or equipment

3.3 Wheel and tyre assembly on motorcycle is checked for correct operation

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and motorcycle is presented ready for use

4.2 and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

remove, refit and adjust the front and rear wheel assemblies of one motorcycle.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to removing and refitting motorcycle wheel and tyre assemblies, including procedures for using:

safety glasses, ear protection and safety footwear

motorcycle lifting and supporting equipment

motorcycle wheel assembly removal and refitting equipment

types of motorcycle wheels and tyres

types and applications of motorcycle drives, including:

chain drive

belt drive

driveshaft drive systems

procedures for removing and refitting motorcycle wheel and tyre assemblies, including:

axle nut tensioning

drive chain tensioning

post-fitting procedures and checks of motorcycle wheel assemblies, including wheel and tyre assembly alignment.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to remove wheel and tyre assembly

1.1 Environmental and safety requirements are sourced and interpreted

1.2 Task instruction is interpreted and wheel and tyre assembly to be worked on is identified

1.3 Manufacturer specifications for removing and replacing wheel and tyre assembly are sourced and interpreted

1.4 Potential hazards and risks associated with task are identified and reported to workplace supervisor

1.5 Tools and equipment required for removing and replacing wheel and tyre assembly are identified and checked for serviceability

2. Remove wheel and tyre assembly

2.1 Motorcycle is prepared for wheel removal according to workplace procedures and safety requirements

2.2 Wheel and tyre assembly is removed according to workplace procedures and manufacturer specifications, and without causing damage to components, tools or equipment

2.3 Wheel and tyre assembly is identified according to manufacturer specifications

3. Refit wheel and tyre assembly

3.1 Wheel and tyre assembly is prepared for replacement

3.2 Wheel and tyre assembly is replaced according to workplace procedures, manufacturer specifications and safety requirements, and without causing damage to components, tools or equipment

3.3 Wheel and tyre assembly on motorcycle is checked for correct operation

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and motorcycle is presented ready for use

4.2 and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety requirements must include:

work health and safety (WHS), occupational health and safety (OHS) requirements, including procedures for using:

safety glasses, ear protection and safety footwear

motorcycle lifting and supporting equipment

motorcycle wheel assembly removal and refitting equipment.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Environmental and safety requirements are sourced and interpreted 
Task instruction is interpreted and wheel and tyre assembly to be worked on is identified 
Manufacturer specifications for removing and replacing wheel and tyre assembly are sourced and interpreted 
Potential hazards and risks associated with task are identified and reported to workplace supervisor 
Tools and equipment required for removing and replacing wheel and tyre assembly are identified and checked for serviceability 
Motorcycle is prepared for wheel removal according to workplace procedures and safety requirements 
Wheel and tyre assembly is removed according to workplace procedures and manufacturer specifications, and without causing damage to components, tools or equipment 
Wheel and tyre assembly is identified according to manufacturer specifications 
Wheel and tyre assembly is prepared for replacement 
Wheel and tyre assembly is replaced according to workplace procedures, manufacturer specifications and safety requirements, and without causing damage to components, tools or equipment 
Wheel and tyre assembly on motorcycle is checked for correct operation 
Final inspection is made to ensure work is to workplace expectations and motorcycle is presented ready for use 
and recyclable material is collected 
Tools and equipment are checked and stored according to workplace procedures 
Workplace documentation is processed according to workplace procedures 
Environmental and safety requirements are sourced and interpreted 
Task instruction is interpreted and wheel and tyre assembly to be worked on is identified 
Manufacturer specifications for removing and replacing wheel and tyre assembly are sourced and interpreted 
Potential hazards and risks associated with task are identified and reported to workplace supervisor 
Tools and equipment required for removing and replacing wheel and tyre assembly are identified and checked for serviceability 
Motorcycle is prepared for wheel removal according to workplace procedures and safety requirements 
Wheel and tyre assembly is removed according to workplace procedures and manufacturer specifications, and without causing damage to components, tools or equipment 
Wheel and tyre assembly is identified according to manufacturer specifications 
Wheel and tyre assembly is prepared for replacement 
Wheel and tyre assembly is replaced according to workplace procedures, manufacturer specifications and safety requirements, and without causing damage to components, tools or equipment 
Wheel and tyre assembly on motorcycle is checked for correct operation 
Final inspection is made to ensure work is to workplace expectations and motorcycle is presented ready for use 
and recyclable material is collected 
Tools and equipment are checked and stored according to workplace procedures 
Workplace documentation is processed according to workplace procedures 

Forms

Assessment Cover Sheet

AURJTJ003 - Remove and refit motorcycle wheel and tyre assemblies
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AURJTJ003 - Remove and refit motorcycle wheel and tyre assemblies

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: