Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AURKTR001 Mapping and Delivery Guide
Diagnose and repair electronic over hydraulic control systems

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency AURKTR001 - Diagnose and repair electronic over hydraulic control systems
Description
Employability Skills
Learning Outcomes and Application This unit describes the performance outcomes required to diagnose and repair faults in electronic over hydraulic control systems. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The electronic over hydraulic control systems include those in agricultural machinery, heavy commercial vehicles, marine vessels or mobile plant machinery.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must satisfy NVR/AQTF assessor requirements.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessment must include direct observation of tasks.

Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the electronic over hydraulic control systems that they have worked on, e.g. repair orders.

Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.

The following resources must be made available:

automotive repair workplace or simulated workplace

workplace instructions

manufacturer electronic over hydraulic control system specifications

two different electronic over hydraulic control systems with faults as specified in the performance evidence

diagnostic equipment for electronic over hydraulic control systems

tools, equipment and materials appropriate for repairing and adjusting mobile plant electronic over hydraulic control systems.

Prerequisites/co-requisites
Competency Field Mechanical - Mobile Plant
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to diagnose and repair electronic over hydraulic control system
  • Job requirements are determined from workplace instructions
  • Diagnostic information is sourced and interpreted
  • Diagnostic options are analysed and those most appropriate to the circumstances are selected
  • Hazards associated with the work are identified and risks are managed
  • Diagnostic tools and equipment are selected and checked for serviceability
       
Element: Diagnose electronic over hydraulic control system
  • Diagnostic tests are carried out according to manufacturer specifications, workplace procedures and safety requirements
  • Faults are identified from diagnostic test results and causes of faults are determined
  • Diagnosis findings, including recommendations for necessary repairs or adjustments, are reported according to workplace procedures
       
Element: Repair electronic over hydraulic control system
  • Repair information is sourced and interpreted
  • Repair options are analysed and those most appropriate to the circumstances are selected
  • Repair tools, equipment and materials are selected and prepared
  • Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
  • Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified
       
Element: Complete work processes
  • Final inspection is made to ensure work is to workplace expectations and machinery is presented ready for use
  • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • Tools and equipment are checked and stored according to workplace procedures
  • Workplace documentation is processed according to workplace procedures
       
Element: Prepare to diagnose and repair electronic over hydraulic control system
  • Job requirements are determined from workplace instructions
  • Diagnostic information is sourced and interpreted
  • Diagnostic options are analysed and those most appropriate to the circumstances are selected
  • Hazards associated with the work are identified and risks are managed
  • Diagnostic tools and equipment are selected and checked for serviceability
       
Element: Diagnose electronic over hydraulic control system
  • Diagnostic tests are carried out according to manufacturer specifications, workplace procedures and safety requirements
  • Faults are identified from diagnostic test results and causes of faults are determined
  • Diagnosis findings, including recommendations for necessary repairs or adjustments, are reported according to workplace procedures
       
Element: Repair electronic over hydraulic control system
  • Repair information is sourced and interpreted
  • Repair options are analysed and those most appropriate to the circumstances are selected
  • Repair tools, equipment and materials are selected and prepared
  • Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
  • Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified
       
Element: Complete work processes
  • Final inspection is made to ensure work is to workplace expectations and machinery is presented ready for use
  • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • Tools and equipment are checked and stored according to workplace procedures
  • Workplace documentation is processed according to workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to diagnose and repair electronic over hydraulic control system

1.1 Job requirements are determined from workplace instructions

1.2 Diagnostic information is sourced and interpreted

1.3 Diagnostic options are analysed and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Diagnostic tools and equipment are selected and checked for serviceability

2. Diagnose electronic over hydraulic control system

2.1 Diagnostic tests are carried out according to manufacturer specifications, workplace procedures and safety requirements

2.2 Faults are identified from diagnostic test results and causes of faults are determined

2.3 Diagnosis findings, including recommendations for necessary repairs or adjustments, are reported according to workplace procedures

3. Repair electronic over hydraulic control system

3.1 Repair information is sourced and interpreted

3.2 Repair options are analysed and those most appropriate to the circumstances are selected

3.3 Repair tools, equipment and materials are selected and prepared

3.4 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems

3.5 Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and machinery is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

diagnose and repair a fault in electronic over hydraulic control system components as follows:

all four of the following:

hydraulic proportional control solenoids (flow, pressure and directional)

joysticks, potentiometer or touchscreens

sensors and feedback devices

electronic control amplifier units

one of the following:

electronic over hydraulic circuitry

servo control valves (flow, pressure and directional)

electronic control unit (ECU).

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to diagnosing and repairing electronic over hydraulic control systems, including procedures for:

working with high pressure fluid hazards

isolating and stabilising machines

operating principles of electronic over hydraulic systems and associated components, including operating principles of flow, pressure and directional control in:

electronic open loop circuits

electronic semi open loop circuits

electronic closed loop circuits

application, purpose and operation of electronic over hydraulic control systems and components, including:

hydraulic proportional control solenoids

servo control units

sensors

feedback devices

electronic control amplifier units

joysticks

electronic control units

electronic over hydraulic circuitry

diagnostic testing procedures for electronic over hydraulic control systems, including:

electronic system analysis while using industry-relevant test equipment

component wear analysis

system operation analysis

procedures for inspecting and evaluating the following components:

proportional control valves

servo control units

electronic control units

sensors

feedback devices

repair procedures for electronic over hydraulic control systems, including procedures for:

testing electronic devices

replacing electronic devices and adjusting the following:

maximum and minimum flow points

dither

opening ramps

closing ramps

post-repair testing procedures for electronic over hydraulic control systems.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to diagnose and repair electronic over hydraulic control system

1.1 Job requirements are determined from workplace instructions

1.2 Diagnostic information is sourced and interpreted

1.3 Diagnostic options are analysed and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Diagnostic tools and equipment are selected and checked for serviceability

2. Diagnose electronic over hydraulic control system

2.1 Diagnostic tests are carried out according to manufacturer specifications, workplace procedures and safety requirements

2.2 Faults are identified from diagnostic test results and causes of faults are determined

2.3 Diagnosis findings, including recommendations for necessary repairs or adjustments, are reported according to workplace procedures

3. Repair electronic over hydraulic control system

3.1 Repair information is sourced and interpreted

3.2 Repair options are analysed and those most appropriate to the circumstances are selected

3.3 Repair tools, equipment and materials are selected and prepared

3.4 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems

3.5 Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and machinery is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

working with high pressure fluid hazards

isolating and stabilising machines.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Job requirements are determined from workplace instructions 
Diagnostic information is sourced and interpreted 
Diagnostic options are analysed and those most appropriate to the circumstances are selected 
Hazards associated with the work are identified and risks are managed 
Diagnostic tools and equipment are selected and checked for serviceability 
Diagnostic tests are carried out according to manufacturer specifications, workplace procedures and safety requirements 
Faults are identified from diagnostic test results and causes of faults are determined 
Diagnosis findings, including recommendations for necessary repairs or adjustments, are reported according to workplace procedures 
Repair information is sourced and interpreted 
Repair options are analysed and those most appropriate to the circumstances are selected 
Repair tools, equipment and materials are selected and prepared 
Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems 
Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified 
Final inspection is made to ensure work is to workplace expectations and machinery is presented ready for use 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected 
Tools and equipment are checked and stored according to workplace procedures 
Workplace documentation is processed according to workplace procedures 
Job requirements are determined from workplace instructions 
Diagnostic information is sourced and interpreted 
Diagnostic options are analysed and those most appropriate to the circumstances are selected 
Hazards associated with the work are identified and risks are managed 
Diagnostic tools and equipment are selected and checked for serviceability 
Diagnostic tests are carried out according to manufacturer specifications, workplace procedures and safety requirements 
Faults are identified from diagnostic test results and causes of faults are determined 
Diagnosis findings, including recommendations for necessary repairs or adjustments, are reported according to workplace procedures 
Repair information is sourced and interpreted 
Repair options are analysed and those most appropriate to the circumstances are selected 
Repair tools, equipment and materials are selected and prepared 
Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems 
Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair process are rectified 
Final inspection is made to ensure work is to workplace expectations and machinery is presented ready for use 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected 
Tools and equipment are checked and stored according to workplace procedures 
Workplace documentation is processed according to workplace procedures 

Forms

Assessment Cover Sheet

AURKTR001 - Diagnose and repair electronic over hydraulic control systems
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

AURKTR001 - Diagnose and repair electronic over hydraulic control systems

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: