Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AURLTJ002 Mapping and Delivery Guide
Remove, inspect, repair and refit light vehicle tyres and tubes

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency AURLTJ002 - Remove, inspect, repair and refit light vehicle tyres and tubes
Description
Employability Skills
Learning Outcomes and Application This unit describes the performance outcomes required to remove and refit light vehicle tyres and tubes from wheels. It involves identifying and confirming work requirements, preparing for the work; inspecting, repairing and refitting the tyres and tubes, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The tyres and tubes include those of light vehicles, motorcycles or outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must satisfy NVR/AQTF assessor requirements.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessment must include direct observation of tasks.

Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the light vehicle tyres and tubes that they have worked on, e.g. repair orders.

Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.

The following resources must be made available:

automotive repair workplace or simulated workplace

workplace instructions

manufacturer tyre and tube repair procedures and specifications

light vehicle tyres, tubes and wheels specified in the performance evidence

tools, equipment and materials appropriate for removing, inspecting, repairing and refitting light vehicle tyres and tubes, including:

tyre and tube repair tools and equipment

tyre and tube repair consumables

tyre changing tools and equipment.

Prerequisites/co-requisites
Competency Field Mechanical - Light Vehicle
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to remove, inspect, repair and refit light vehicle tyres and tubes
  • Job requirements are determined from workplace instructions
  • Tyre and tube removal, inspection, repair and refitting information is sourced and interpreted
  • Hazards associated with the work are identified and risks are managed
  • Tools, equipment and materials are selected and checked for serviceability
       
Element: Remove and inspect tyres, tubes and wheels
  • Tyres and tubes are removed from wheels according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • Tyres, tubes and wheels are inspected according to manufacturer specifications and workplace procedures
  • Inspection findings and recommendations for necessary repairs are reported according to workplace procedures
       
Element: Repair and refit tyres and tubes
  • Repair options are analysed and those most appropriate to the circumstances are selected
  • Tyresand tubes are repaired according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • Tyre is mounted to wheel according to manufacturer specifications and workplace procedures, and without causing damage to components or systems
  • Assembled wheel and tyre are checked for serviceability and correct assembly, and inflated according to manufacturer specifications and workplace procedures
       
Element: Complete work processes
  • Final inspection is made to ensure work is to workplace expectations and wheel assembly is presented ready for use
  • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • Tools and equipment are checked and stored according to workplace procedures
  • Workplace documentation is processed according to workplace procedures
       
Element: Prepare to remove, inspect, repair and refit light vehicle tyres and tubes
  • Job requirements are determined from workplace instructions
  • Tyre and tube removal, inspection, repair and refitting information is sourced and interpreted
  • Hazards associated with the work are identified and risks are managed
  • Tools, equipment and materials are selected and checked for serviceability
       
Element: Remove and inspect tyres, tubes and wheels
  • Tyres and tubes are removed from wheels according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • Tyres, tubes and wheels are inspected according to manufacturer specifications and workplace procedures
  • Inspection findings and recommendations for necessary repairs are reported according to workplace procedures
       
Element: Repair and refit tyres and tubes
  • Repair options are analysed and those most appropriate to the circumstances are selected
  • Tyresand tubes are repaired according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • Tyre is mounted to wheel according to manufacturer specifications and workplace procedures, and without causing damage to components or systems
  • Assembled wheel and tyre are checked for serviceability and correct assembly, and inflated according to manufacturer specifications and workplace procedures
       
Element: Complete work processes
  • Final inspection is made to ensure work is to workplace expectations and wheel assembly is presented ready for use
  • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • Tools and equipment are checked and stored according to workplace procedures
  • Workplace documentation is processed according to workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to remove, inspect, repair and refit light vehicle tyres and tubes

1.1 Job requirements are determined from workplace instructions

1.2 Tyre and tube removal, inspection, repair and refitting information is sourced and interpreted

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools, equipment and materials are selected and checked for serviceability

2. Remove and inspect tyres, tubes and wheels

2.1 Tyres and tubes are removed from wheels according to manufacturer specifications, workplace procedures, and safety and environmental requirements

2.2 Tyres, tubes and wheels are inspected according to manufacturer specifications and workplace procedures

2.3 Inspection findings and recommendations for necessary repairs are reported according to workplace procedures

3. Repair and refit tyres and tubes

3.1 Repair options are analysed and those most appropriate to the circumstances are selected

3.2 Tyresand tubes are repaired according to manufacturer specifications, workplace procedures, and safety and environmental requirements

3.3 Tyre is mounted to wheel according to manufacturer specifications and workplace procedures, and without causing damage to components or systems

3.4 Assembled wheel and tyre are checked for serviceability and correct assembly, and inflated according to manufacturer specifications and workplace procedures

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and wheel assembly is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

remove, inspect, repair and refit light vehicle tyres to both steel and alloy wheels, including repairs to:

two bias ply tyres

two tubes

two radial ply tyres.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to light vehicle tyres and tubes, including procedures for:

deflating and inflating tyres

manually handling light vehicle wheel assemblies

environmental requirements, including procedures for trapping and disposing of tyre material produced during repair procedures

procedures for removing, inspecting, repairing and refitting tyres and tubes, including:

split lock rings

one piece wheels

types and applications of tyres, tubes and wheels, including:

radial and bias or diagonal ply tyres

tubed and tubeless tyres

steel and alloy wheels

run flat tyres

types, application and operation of tyre changing equipment and tyre and tube repair equipment

post-fitting procedures and checks of light vehicle tyres and tubes.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to remove, inspect, repair and refit light vehicle tyres and tubes

1.1 Job requirements are determined from workplace instructions

1.2 Tyre and tube removal, inspection, repair and refitting information is sourced and interpreted

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools, equipment and materials are selected and checked for serviceability

2. Remove and inspect tyres, tubes and wheels

2.1 Tyres and tubes are removed from wheels according to manufacturer specifications, workplace procedures, and safety and environmental requirements

2.2 Tyres, tubes and wheels are inspected according to manufacturer specifications and workplace procedures

2.3 Inspection findings and recommendations for necessary repairs are reported according to workplace procedures

3. Repair and refit tyres and tubes

3.1 Repair options are analysed and those most appropriate to the circumstances are selected

3.2 Tyresand tubes are repaired according to manufacturer specifications, workplace procedures, and safety and environmental requirements

3.3 Tyre is mounted to wheel according to manufacturer specifications and workplace procedures, and without causing damage to components or systems

3.4 Assembled wheel and tyre are checked for serviceability and correct assembly, and inflated according to manufacturer specifications and workplace procedures

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and wheel assembly is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

deflating and inflating light vehicle tyres

manual handling light vehicle wheel assemblies

environmental requirements, including procedures for trapping and disposing of tyre material produced during repair procedures.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Job requirements are determined from workplace instructions 
Tyre and tube removal, inspection, repair and refitting information is sourced and interpreted 
Hazards associated with the work are identified and risks are managed 
Tools, equipment and materials are selected and checked for serviceability 
Tyres and tubes are removed from wheels according to manufacturer specifications, workplace procedures, and safety and environmental requirements 
Tyres, tubes and wheels are inspected according to manufacturer specifications and workplace procedures 
Inspection findings and recommendations for necessary repairs are reported according to workplace procedures 
Repair options are analysed and those most appropriate to the circumstances are selected 
Tyresand tubes are repaired according to manufacturer specifications, workplace procedures, and safety and environmental requirements 
Tyre is mounted to wheel according to manufacturer specifications and workplace procedures, and without causing damage to components or systems 
Assembled wheel and tyre are checked for serviceability and correct assembly, and inflated according to manufacturer specifications and workplace procedures 
Final inspection is made to ensure work is to workplace expectations and wheel assembly is presented ready for use 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected 
Tools and equipment are checked and stored according to workplace procedures 
Workplace documentation is processed according to workplace procedures 
Job requirements are determined from workplace instructions 
Tyre and tube removal, inspection, repair and refitting information is sourced and interpreted 
Hazards associated with the work are identified and risks are managed 
Tools, equipment and materials are selected and checked for serviceability 
Tyres and tubes are removed from wheels according to manufacturer specifications, workplace procedures, and safety and environmental requirements 
Tyres, tubes and wheels are inspected according to manufacturer specifications and workplace procedures 
Inspection findings and recommendations for necessary repairs are reported according to workplace procedures 
Repair options are analysed and those most appropriate to the circumstances are selected 
Tyresand tubes are repaired according to manufacturer specifications, workplace procedures, and safety and environmental requirements 
Tyre is mounted to wheel according to manufacturer specifications and workplace procedures, and without causing damage to components or systems 
Assembled wheel and tyre are checked for serviceability and correct assembly, and inflated according to manufacturer specifications and workplace procedures 
Final inspection is made to ensure work is to workplace expectations and wheel assembly is presented ready for use 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected 
Tools and equipment are checked and stored according to workplace procedures 
Workplace documentation is processed according to workplace procedures 

Forms

Assessment Cover Sheet

AURLTJ002 - Remove, inspect, repair and refit light vehicle tyres and tubes
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

AURLTJ002 - Remove, inspect, repair and refit light vehicle tyres and tubes

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: