AURMTA002 - Assemble and prepare competition vehicles for motor sport events Competency Mapping Template
Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
AURMTA002 Mapping and Delivery Guide Assemble and prepare competition vehicles for motor sport events
Version 1.0 Issue Date: April 2024
Qualification
-
Unit of Competency
AURMTA002 - Assemble and prepare competition vehicles for motor sport events
Description
Employability Skills
Learning Outcomes and Application
This unit describes the performance outcomes required to assemble and prepare a competition vehicle in a motor sport environment. It involves preparing for the task, preparing components, installing sub-assemblies and systems, setting vehicle baseline configuration according to team requirements, supplementary regulations and component supplier specifications, and completing workplace processes and documentation.It applies to those working in the motor sport industry. A competition vehicle is any vehicle that competes in a motor sport event of a competitive nature under one of the following categories: race, speed, rally road, off road, auto test and timed.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Duration and Setting
X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the competition vehicles that they have assembled and prepared for a motor sport event, e.g. work order.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
motor sport repair workplace or simulated workplace
two different motor sport competition vehicles
sub-assemblies and ancillary components to be installed in competition vehicles
controlling body rules, category rules and supplementary regulations for the motor sport event
personal and motor sport team safety procedures and requirements, including PPE
tools, equipment and material for assembling and preparing a competition vehicle.
Prerequisites/co-requisites
Competency Field
Motor Sport
Development and validation strategy and guide for assessors and learners
Student Learning Resources
Handouts Activities
Slides PPT
Assessment 1
Assessment 2
Assessment 3
Assessment 4
Elements of Competency
Performance Criteria
Element: Collect event category information and analyse assembly requirements
Job requirements are determined from event category information and workplace instructions
Vehicle operating conditions are checked and clarification of specifications sought as required
Methods for assembly and preparation are sourced and interpreted and those most appropriate to the circumstances are selected
Modifications or adaptation of equipment are proposed as required
Component requirements list is prepared and communicated to appropriate persons
Procedures for minimising waste material are determined
Element: Prepare work area and equipment
Tools and equipment are sourced and checked for safe and effective operation
Work area is cleaned and laid out for job requirements according to work safety requirements and team procedures
Hazards associated with the work are identified and risks are managed
Problems with work area or operation of equipment are reported to appropriate persons according to team procedures
Element: Prepare components for assembly
Assembly procedures and information are sourced and interpreted
Components are cleaned to facilitate pre-assembly inspection according to team procedures and safety and environmental requirements, and without causing damage to components
Components are inspected for function and quality to ensure optimum use of resources
Problems with components are reported to appropriate persons according to team procedures as required
Element: Install sub-assemblies
Sub-assemblies are inspected for quality and readiness for installation according to manufacturer specifications
Sub-assemblies are installed and fasteners tensioned according to safety requirements and manufacturer installation sequences and techniques
Checks are made to ensure accurate and complete fitting according to team procedures and manufacturer specifications
Problems with sub-assemblies are reported to appropriate persons according to team procedures as required
Element: Install ancillary systems
Critical components are located according to function, susceptibility to damage, and ease of maintenance
Critical components are installed and fasteners tensioned according to team procedures and manufacturer specifications
Optimum layout for wiring loom, connectors, hoses, hard lines and ancillary components is confirmed
Wiring loom, connectors, hoses, hard lines and ancillary components are installed and fasteners tensioned according to manufacturer specifications, team procedures and safety requirements
Entire installation and shield are secured to maximise reliability and minimise susceptibility to damage according to manufacturer specifications, team procedures and safety requirements
Checks are made during and after installation to ensure accurate and complete fitting according to team procedures and manufacturer specifications
Problems with components are reported to appropriate persons according to team procedures as required
Element: Conduct post-assembly checks
Vehicle fluid levels are checked and topped up as required according to team procedures and manufacturer specifications
Temporary bungs and covers are removed and engine pre-start checks are conducted
Sub-assemblies and ancillary systems are checked for correct operation
Element: Set vehicle baseline configuration
Vehicle baseline settings are determined from team instructions, category regulations, and component supplier specifications
Level surface is established on which to place vehicle for set-up
Springs and dampers are installed according to manufacturer specifications, team procedures and safety requirements
Ride height and corner weight are measured and adjusted as required and according to manufacturer specifications, team procedures and safety requirements
Steering angles are measured and adjusted as required and according to manufacturer specifications, team procedures and safety requirements
Potential or existing problems are reported to appropriate persons according to team procedures as required
Element: Complete work processes
Final inspection is made to ensure work is to workplace expectations and vehicle is cleaned and presented ready for use
Work area is cleaned, waste and non-recyclable material is disposed of and recyclable material is collected
Tools and equipment are checked and stored, and surplus components and consumables are packed and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Element: Collect event category information and analyse assembly requirements
Job requirements are determined from event category information and workplace instructions
Vehicle operating conditions are checked and clarification of specifications sought as required
Methods for assembly and preparation are sourced and interpreted and those most appropriate to the circumstances are selected
Modifications or adaptation of equipment are proposed as required
Component requirements list is prepared and communicated to appropriate persons
Procedures for minimising waste material are determined
Element: Prepare work area and equipment
Tools and equipment are sourced and checked for safe and effective operation
Work area is cleaned and laid out for job requirements according to work safety requirements and team procedures
Hazards associated with the work are identified and risks are managed
Problems with work area or operation of equipment are reported to appropriate persons according to team procedures
Element: Prepare components for assembly
Assembly procedures and information are sourced and interpreted
Components are cleaned to facilitate pre-assembly inspection according to team procedures and safety and environmental requirements, and without causing damage to components
Components are inspected for function and quality to ensure optimum use of resources
Problems with components are reported to appropriate persons according to team procedures as required
Element: Install sub-assemblies
Sub-assemblies are inspected for quality and readiness for installation according to manufacturer specifications
Sub-assemblies are installed and fasteners tensioned according to safety requirements and manufacturer installation sequences and techniques
Checks are made to ensure accurate and complete fitting according to team procedures and manufacturer specifications
Problems with sub-assemblies are reported to appropriate persons according to team procedures as required
Element: Install ancillary systems
Critical components are located according to function, susceptibility to damage, and ease of maintenance
Critical components are installed and fasteners tensioned according to team procedures and manufacturer specifications
Optimum layout for wiring loom, connectors, hoses, hard lines and ancillary components is confirmed
Wiring loom, connectors, hoses, hard lines and ancillary components are installed and fasteners tensioned according to manufacturer specifications, team procedures and safety requirements
Entire installation and shield are secured to maximise reliability and minimise susceptibility to damage according to manufacturer specifications, team procedures and safety requirements
Checks are made during and after installation to ensure accurate and complete fitting according to team procedures and manufacturer specifications
Problems with components are reported to appropriate persons according to team procedures as required
Element: Conduct post-assembly checks
Vehicle fluid levels are checked and topped up as required according to team procedures and manufacturer specifications
Temporary bungs and covers are removed and engine pre-start checks are conducted
Sub-assemblies and ancillary systems are checked for correct operation
Element: Set vehicle baseline configuration
Vehicle baseline settings are determined from team instructions, category regulations, and component supplier specifications
Level surface is established on which to place vehicle for set-up
Springs and dampers are installed according to manufacturer specifications, team procedures and safety requirements
Ride height and corner weight are measured and adjusted as required and according to manufacturer specifications, team procedures and safety requirements
Steering angles are measured and adjusted as required and according to manufacturer specifications, team procedures and safety requirements
Potential or existing problems are reported to appropriate persons according to team procedures as required
Element: Complete work processes
Final inspection is made to ensure work is to workplace expectations and vehicle is cleaned and presented ready for use
Work area is cleaned, waste and non-recyclable material is disposed of and recyclable material is collected
Tools and equipment are checked and stored, and surplus components and consumables are packed and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Collect event category information and analyse assembly requirements
1.1 Job requirements are determined from event category information and workplace instructions
1.2 Vehicle operating conditions are checked and clarification of specifications sought as required
1.3 Methods for assembly and preparation are sourced and interpreted and those most appropriate to the circumstances are selected
1.4 Modifications or adaptation of equipment are proposed as required
1.5 Component requirements list is prepared and communicated to appropriate persons
1.6 Procedures for minimising waste material are determined
2. Prepare work area and equipment
2.1 Tools and equipment are sourced and checked for safe and effective operation
2.2 Work area is cleaned and laid out for job requirements according to work safety requirements and team procedures
2.3 Hazards associated with the work are identified and risks are managed
2.4 Problems with work area or operation of equipment are reported to appropriate persons according to team procedures
3. Prepare components for assembly
3.1 Assembly procedures and information are sourced and interpreted
3.2 Components are cleaned to facilitate pre-assembly inspection according to team procedures and safety and environmental requirements, and without causing damage to components
3.3 Components are inspected for function and quality to ensure optimum use of resources
3.4 Problems with components are reported to appropriate persons according to team procedures as required
4. Install sub-assemblies
4.1 Sub-assemblies are inspected for quality and readiness for installation according to manufacturer specifications
4.2 Sub-assemblies are installed and fasteners tensioned according to safety requirements and manufacturer installation sequences and techniques
4.3 Checks are made to ensure accurate and complete fitting according to team procedures and manufacturer specifications
4.4 Problems with sub-assemblies are reported to appropriate persons according to team procedures as required
5. Install ancillary systems
5.1 Critical components are located according to function, susceptibility to damage, and ease of maintenance
5.2 Critical components are installed and fasteners tensioned according to team procedures and manufacturer specifications
5.3 Optimum layout for wiring loom, connectors, hoses, hard lines and ancillary components is confirmed
5.4 Wiring loom, connectors, hoses, hard lines and ancillary components are installed and fasteners tensioned according to manufacturer specifications, team procedures and safety requirements
5.5 Entire installation and shield are secured to maximise reliability and minimise susceptibility to damage according to manufacturer specifications, team procedures and safety requirements
5.6 Checks are made during and after installation to ensure accurate and complete fitting according to team procedures and manufacturer specifications
5.7 Problems with components are reported to appropriate persons according to team procedures as required
6. Conduct post-assembly checks
6.1 Vehicle fluid levels are checked and topped up as required according to team procedures and manufacturer specifications
6.2 Temporary bungs and covers are removed and engine pre-start checks are conducted
6.3 Sub-assemblies and ancillary systems are checked for correct operation
7. Set vehicle baseline configuration
7.1 Vehicle baseline settings are determined from team instructions, category regulations, and component supplier specifications
7.2 Level surface is established on which to place vehicle for set-up
7.3 Springs and dampers are installed according to manufacturer specifications, team procedures and safety requirements
7.4 Ride height and corner weight are measured and adjusted as required and according to manufacturer specifications, team procedures and safety requirements
7.5 Steering angles are measured and adjusted as required and according to manufacturer specifications, team procedures and safety requirements
7.6 Potential or existing problems are reported to appropriate persons according to team procedures as required
8. Complete work processes
8.1 Final inspection is made to ensure work is to workplace expectations and vehicle is cleaned and presented ready for use
8.2 Work area is cleaned, waste and non-recyclable material is disposed of and recyclable material is collected
8.3 Tools and equipment are checked and stored, and surplus components and consumables are packed and stored according to workplace procedures
8.4 Workplace documentation is processed according to workplace procedures
Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
assemble and prepare two different competition vehicles, in which the work must involve:
installing body, mechanical and electrical systems
installing fluid or pneumatic and fire systems.
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to assembling and preparing competition vehicles, including procedures for:
selecting and using personal protective equipment (PPE) when assembling competition vehicles
using chemical cleaning and lubricating agents
environmental requirements, including procedures for trapping, storing and disposing of chemicals and fluids released during assembly process
details of competition vehicle design, quality, and material, equipment and quantities in team instructions, supplementary regulations and manufacturer specifications
typical stages of competition vehicle assembly
procedures for setting up work area and component layout
component cleaning and inspection procedures
procedures for assembling and installing sub-assemblies and ancillary systems, including:
sub-assembly and ancillary system installation sequence and techniques
optimum layout for conduits and ancillary components
types of securing devices and securing methods
types of shielding devices and shielding methods
procedures for checking fitting of sub-assemblies and ancillary systems
post-assembly checking procedures, including:
checking and topping up fluid levels
engine pre-start checks
measuring pressures, temperatures, noise and checking for leaks of components
checking correct operation of sub-assemblies and ancillary systems
procedures for establishing vehicle baseline configuration
procedures for installing springs and dampers and measuring and adjusting ride height and corner weight
procedures for measuring and adjusting steering angles.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Elements
Elements describe the essential outcomes.
Performance Criteria
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.
1. Collect event category information and analyse assembly requirements
1.1 Job requirements are determined from event category information and workplace instructions
1.2 Vehicle operating conditions are checked and clarification of specifications sought as required
1.3 Methods for assembly and preparation are sourced and interpreted and those most appropriate to the circumstances are selected
1.4 Modifications or adaptation of equipment are proposed as required
1.5 Component requirements list is prepared and communicated to appropriate persons
1.6 Procedures for minimising waste material are determined
2. Prepare work area and equipment
2.1 Tools and equipment are sourced and checked for safe and effective operation
2.2 Work area is cleaned and laid out for job requirements according to work safety requirements and team procedures
2.3 Hazards associated with the work are identified and risks are managed
2.4 Problems with work area or operation of equipment are reported to appropriate persons according to team procedures
3. Prepare components for assembly
3.1 Assembly procedures and information are sourced and interpreted
3.2 Components are cleaned to facilitate pre-assembly inspection according to team procedures and safety and environmental requirements, and without causing damage to components
3.3 Components are inspected for function and quality to ensure optimum use of resources
3.4 Problems with components are reported to appropriate persons according to team procedures as required
4. Install sub-assemblies
4.1 Sub-assemblies are inspected for quality and readiness for installation according to manufacturer specifications
4.2 Sub-assemblies are installed and fasteners tensioned according to safety requirements and manufacturer installation sequences and techniques
4.3 Checks are made to ensure accurate and complete fitting according to team procedures and manufacturer specifications
4.4 Problems with sub-assemblies are reported to appropriate persons according to team procedures as required
5. Install ancillary systems
5.1 Critical components are located according to function, susceptibility to damage, and ease of maintenance
5.2 Critical components are installed and fasteners tensioned according to team procedures and manufacturer specifications
5.3 Optimum layout for wiring loom, connectors, hoses, hard lines and ancillary components is confirmed
5.4 Wiring loom, connectors, hoses, hard lines and ancillary components are installed and fasteners tensioned according to manufacturer specifications, team procedures and safety requirements
5.5 Entire installation and shield are secured to maximise reliability and minimise susceptibility to damage according to manufacturer specifications, team procedures and safety requirements
5.6 Checks are made during and after installation to ensure accurate and complete fitting according to team procedures and manufacturer specifications
5.7 Problems with components are reported to appropriate persons according to team procedures as required
6. Conduct post-assembly checks
6.1 Vehicle fluid levels are checked and topped up as required according to team procedures and manufacturer specifications
6.2 Temporary bungs and covers are removed and engine pre-start checks are conducted
6.3 Sub-assemblies and ancillary systems are checked for correct operation
7. Set vehicle baseline configuration
7.1 Vehicle baseline settings are determined from team instructions, category regulations, and component supplier specifications
7.2 Level surface is established on which to place vehicle for set-up
7.3 Springs and dampers are installed according to manufacturer specifications, team procedures and safety requirements
7.4 Ride height and corner weight are measured and adjusted as required and according to manufacturer specifications, team procedures and safety requirements
7.5 Steering angles are measured and adjusted as required and according to manufacturer specifications, team procedures and safety requirements
7.6 Potential or existing problems are reported to appropriate persons according to team procedures as required
8. Complete work processes
8.1 Final inspection is made to ensure work is to workplace expectations and vehicle is cleaned and presented ready for use
8.2 Work area is cleaned, waste and non-recyclable material is disposed of and recyclable material is collected
8.3 Tools and equipment are checked and stored, and surplus components and consumables are packed and stored according to workplace procedures
8.4 Workplace documentation is processed according to workplace procedures
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Event category information must include:
supplementary regulations
manufacturer specifications, including allowable design, quality, material, equipment and quantities.
Safety and environmental requirements must include:
work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:
selecting and using personal protective equipment (PPE)
using chemical cleaning and lubricating agents
environmental requirements, including procedures for trapping, storing and disposing of chemicals and fluids released during assembly process.
Pre-start checks must include:
abnormal noise
leaks
pressures
temperatures.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Job requirements are determined from event category information and workplace instructions
Vehicle operating conditions are checked and clarification of specifications sought as required
Methods for assembly and preparation are sourced and interpreted and those most appropriate to the circumstances are selected
Modifications or adaptation of equipment are proposed as required
Component requirements list is prepared and communicated to appropriate persons
Procedures for minimising waste material are determined
Tools and equipment are sourced and checked for safe and effective operation
Work area is cleaned and laid out for job requirements according to work safety requirements and team procedures
Hazards associated with the work are identified and risks are managed
Problems with work area or operation of equipment are reported to appropriate persons according to team procedures
Assembly procedures and information are sourced and interpreted
Components are cleaned to facilitate pre-assembly inspection according to team procedures and safety and environmental requirements, and without causing damage to components
Components are inspected for function and quality to ensure optimum use of resources
Problems with components are reported to appropriate persons according to team procedures as required
Sub-assemblies are inspected for quality and readiness for installation according to manufacturer specifications
Sub-assemblies are installed and fasteners tensioned according to safety requirements and manufacturer installation sequences and techniques
Checks are made to ensure accurate and complete fitting according to team procedures and manufacturer specifications
Problems with sub-assemblies are reported to appropriate persons according to team procedures as required
Critical components are located according to function, susceptibility to damage, and ease of maintenance
Critical components are installed and fasteners tensioned according to team procedures and manufacturer specifications
Optimum layout for wiring loom, connectors, hoses, hard lines and ancillary components is confirmed
Wiring loom, connectors, hoses, hard lines and ancillary components are installed and fasteners tensioned according to manufacturer specifications, team procedures and safety requirements
Entire installation and shield are secured to maximise reliability and minimise susceptibility to damage according to manufacturer specifications, team procedures and safety requirements
Checks are made during and after installation to ensure accurate and complete fitting according to team procedures and manufacturer specifications
Problems with components are reported to appropriate persons according to team procedures as required
Vehicle fluid levels are checked and topped up as required according to team procedures and manufacturer specifications
Temporary bungs and covers are removed and engine pre-start checks are conducted
Sub-assemblies and ancillary systems are checked for correct operation
Vehicle baseline settings are determined from team instructions, category regulations, and component supplier specifications
Level surface is established on which to place vehicle for set-up
Springs and dampers are installed according to manufacturer specifications, team procedures and safety requirements
Ride height and corner weight are measured and adjusted as required and according to manufacturer specifications, team procedures and safety requirements
Steering angles are measured and adjusted as required and according to manufacturer specifications, team procedures and safety requirements
Potential or existing problems are reported to appropriate persons according to team procedures as required
Final inspection is made to ensure work is to workplace expectations and vehicle is cleaned and presented ready for use
Work area is cleaned, waste and non-recyclable material is disposed of and recyclable material is collected
Tools and equipment are checked and stored, and surplus components and consumables are packed and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Job requirements are determined from event category information and workplace instructions
Vehicle operating conditions are checked and clarification of specifications sought as required
Methods for assembly and preparation are sourced and interpreted and those most appropriate to the circumstances are selected
Modifications or adaptation of equipment are proposed as required
Component requirements list is prepared and communicated to appropriate persons
Procedures for minimising waste material are determined
Tools and equipment are sourced and checked for safe and effective operation
Work area is cleaned and laid out for job requirements according to work safety requirements and team procedures
Hazards associated with the work are identified and risks are managed
Problems with work area or operation of equipment are reported to appropriate persons according to team procedures
Assembly procedures and information are sourced and interpreted
Components are cleaned to facilitate pre-assembly inspection according to team procedures and safety and environmental requirements, and without causing damage to components
Components are inspected for function and quality to ensure optimum use of resources
Problems with components are reported to appropriate persons according to team procedures as required
Sub-assemblies are inspected for quality and readiness for installation according to manufacturer specifications
Sub-assemblies are installed and fasteners tensioned according to safety requirements and manufacturer installation sequences and techniques
Checks are made to ensure accurate and complete fitting according to team procedures and manufacturer specifications
Problems with sub-assemblies are reported to appropriate persons according to team procedures as required
Critical components are located according to function, susceptibility to damage, and ease of maintenance
Critical components are installed and fasteners tensioned according to team procedures and manufacturer specifications
Optimum layout for wiring loom, connectors, hoses, hard lines and ancillary components is confirmed
Wiring loom, connectors, hoses, hard lines and ancillary components are installed and fasteners tensioned according to manufacturer specifications, team procedures and safety requirements
Entire installation and shield are secured to maximise reliability and minimise susceptibility to damage according to manufacturer specifications, team procedures and safety requirements
Checks are made during and after installation to ensure accurate and complete fitting according to team procedures and manufacturer specifications
Problems with components are reported to appropriate persons according to team procedures as required
Vehicle fluid levels are checked and topped up as required according to team procedures and manufacturer specifications
Temporary bungs and covers are removed and engine pre-start checks are conducted
Sub-assemblies and ancillary systems are checked for correct operation
Vehicle baseline settings are determined from team instructions, category regulations, and component supplier specifications
Level surface is established on which to place vehicle for set-up
Springs and dampers are installed according to manufacturer specifications, team procedures and safety requirements
Ride height and corner weight are measured and adjusted as required and according to manufacturer specifications, team procedures and safety requirements
Steering angles are measured and adjusted as required and according to manufacturer specifications, team procedures and safety requirements
Potential or existing problems are reported to appropriate persons according to team procedures as required
Final inspection is made to ensure work is to workplace expectations and vehicle is cleaned and presented ready for use
Work area is cleaned, waste and non-recyclable material is disposed of and recyclable material is collected
Tools and equipment are checked and stored, and surplus components and consumables are packed and stored according to workplace procedures
Workplace documentation is processed according to workplace procedures
Forms
Assessment Cover Sheet
AURMTA002 - Assemble and prepare competition vehicles for motor sport events
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
AURMTA002 - Assemble and prepare competition vehicles for motor sport events
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent