Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AURMTJ001 Mapping and Delivery Guide
Select and prepare motor sport competition vehicle tyres and wheels

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency AURMTJ001 - Select and prepare motor sport competition vehicle tyres and wheels
Description
Employability Skills
Learning Outcomes and Application This unit describes the performance outcomes required to select and prepare tyres and wheels for motor sport vehicles to optimise handling performance. It involves identifying and confirming work requirements, preparing for work, identifying application requirements, selecting and preparing tyres, and completing workplace processes and documentation. It includes mounting wheels, conducting pre-race preparation, and post-race maintenance stock control and storage procedures.It applies to those working in the motor sport industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must satisfy NVR/AQTF assessor requirements.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessment must include direct observation of tasks.

Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the tyres and wheels they have selected and prepared for motor sport competition vehicles, e.g. work order.

Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.

The following resources must be made available:

motor sport workplace or simulated workplace

two different motor sport competition vehicles

motor sport tyres and wheels for differing conditions

tools and equipment for mounting and demounting tyres and wheels from motor sport vehicles

equipment appropriate for measuring tyre pressure and temperature, and track and ambient temperatures.
Prerequisites/co-requisites
Competency Field Motor Sport
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Determine and select competition vehicle tyres and wheels
  • Job requirements are determined from workplace instructions
  • Supplementary regulations and component supplier specifications are sourced and interpreted to gain a competitive advantage
  • Specifications are checked against required operating conditions to determine tyre and wheel requirements
  • Tyre and wheel assemblies to be used are selected according to job requirements, and are documented and reported to appropriate personnel as required
       
Element: Prepare for mounting work
  • Tools and equipment are selected and checked for serviceability
  • Work area is cleaned and laid out according to job and team requirements
  • Hazards associated with the work are identified and risks are managed according to safety requirements
       
Element: Mount tyre and wheel assembly to vehicle
  • Mounting surfaces and threaded components are cleaned, checked for damage, and treated as required
  • Tyre and wheel assemblies are selected from stock according to markings and checked against criteria for event
  • Tyre and wheel assemblies are inspected for serviceability according to manufacturer and team procedures
  • Selected tyres and wheels are mounted to vehicle according to manufacturer specifications and procedures and safety requirements
  • Fasteners are tensioned according to component supplier specifications, and fastener locking device is engaged as required according to safety requirements
  • Accurate and complete fitting is checked during and after installation according to manufacturer and team procedures
  • Problems with tyre and wheel assemblies are reported to appropriate personnel
       
Element: Conduct pre-race tyre and wheel preparation
  • Recommended cold tyre inflation pressures and optimum operating pressure requirements are sourced and interpreted
  • Tyre inflation pressures are set to specifications according to manufacturer specifications, team procedures and safety requirements
  • Base line tyre temperature and ambient and traction surface temperatures are measured and documented
  • Tyres are buffed, if specified, according to manufacturer specifications, team procedures and environmental requirements
  • Tyre warmers are fitted and turned on, if specified and allowed, according to manufacturer and team procedures
       
Element: Conduct post-race tyre and wheel maintenance
  • Tyre pressures and temperatures are checked, tyre contact surface is analysed for handling and wear indications, and data is recorded according to team procedures
  • Driver or rider is questioned for assessment of vehicle handling characteristics and data is recorded according to team procedures
  • Additional data is sourced as required, and corresponding changes to tyres and wheels required for next race are determined
  • Tyres are changed to different compound or pattern as required and according to manufacturer specifications and team procedures
  • Removed tyres are tagged or marked for data audit trail according to team procedures
       
Element: Complete work processes
  • Tyres are packed and stored according to team procedures
  • Tyre and wheel stock inventory is assessed, documented and reported to appropriate personnel
  • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • Tools and equipment are checked and stored according to workplace procedures
  • Workplace documentation is processed according to workplace and team procedures
       
Element: Determine and select competition vehicle tyres and wheels
  • Job requirements are determined from workplace instructions
  • Supplementary regulations and component supplier specifications are sourced and interpreted to gain a competitive advantage
  • Specifications are checked against required operating conditions to determine tyre and wheel requirements
  • Tyre and wheel assemblies to be used are selected according to job requirements, and are documented and reported to appropriate personnel as required
       
Element: Prepare for mounting work
  • Tools and equipment are selected and checked for serviceability
  • Work area is cleaned and laid out according to job and team requirements
  • Hazards associated with the work are identified and risks are managed according to safety requirements
       
Element: Mount tyre and wheel assembly to vehicle
  • Mounting surfaces and threaded components are cleaned, checked for damage, and treated as required
  • Tyre and wheel assemblies are selected from stock according to markings and checked against criteria for event
  • Tyre and wheel assemblies are inspected for serviceability according to manufacturer and team procedures
  • Selected tyres and wheels are mounted to vehicle according to manufacturer specifications and procedures and safety requirements
  • Fasteners are tensioned according to component supplier specifications, and fastener locking device is engaged as required according to safety requirements
  • Accurate and complete fitting is checked during and after installation according to manufacturer and team procedures
  • Problems with tyre and wheel assemblies are reported to appropriate personnel
       
Element: Conduct pre-race tyre and wheel preparation
  • Recommended cold tyre inflation pressures and optimum operating pressure requirements are sourced and interpreted
  • Tyre inflation pressures are set to specifications according to manufacturer specifications, team procedures and safety requirements
  • Base line tyre temperature and ambient and traction surface temperatures are measured and documented
  • Tyres are buffed, if specified, according to manufacturer specifications, team procedures and environmental requirements
  • Tyre warmers are fitted and turned on, if specified and allowed, according to manufacturer and team procedures
       
Element: Conduct post-race tyre and wheel maintenance
  • Tyre pressures and temperatures are checked, tyre contact surface is analysed for handling and wear indications, and data is recorded according to team procedures
  • Driver or rider is questioned for assessment of vehicle handling characteristics and data is recorded according to team procedures
  • Additional data is sourced as required, and corresponding changes to tyres and wheels required for next race are determined
  • Tyres are changed to different compound or pattern as required and according to manufacturer specifications and team procedures
  • Removed tyres are tagged or marked for data audit trail according to team procedures
       
Element: Complete work processes
  • Tyres are packed and stored according to team procedures
  • Tyre and wheel stock inventory is assessed, documented and reported to appropriate personnel
  • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • Tools and equipment are checked and stored according to workplace procedures
  • Workplace documentation is processed according to workplace and team procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Determine and select competition vehicle tyres and wheels

1.1 Job requirements are determined from workplace instructions

1.2 Supplementary regulations and component supplier specifications are sourced and interpreted to gain a competitive advantage

1.3 Specifications are checked against required operating conditions to determine tyre and wheel requirements

1.4 Tyre and wheel assemblies to be used are selected according to job requirements, and are documented and reported to appropriate personnel as required

2. Prepare for mounting work

2.1 Tools and equipment are selected and checked for serviceability

2.2 Work area is cleaned and laid out according to job and team requirements

2.3 Hazards associated with the work are identified and risks are managed according to safety requirements

3. Mount tyre and wheel assembly to vehicle

3.1 Mounting surfaces and threaded components are cleaned, checked for damage, and treated as required

3.2 Tyre and wheel assemblies are selected from stock according to markings and checked against criteria for event

3.3 Tyre and wheel assemblies are inspected for serviceability according to manufacturer and team procedures

3.4 Selected tyres and wheels are mounted to vehicle according to manufacturer specifications and procedures and safety requirements

3.5 Fasteners are tensioned according to component supplier specifications, and fastener locking device is engaged as required according to safety requirements

3.6 Accurate and complete fitting is checked during and after installation according to manufacturer and team procedures

3.7 Problems with tyre and wheel assemblies are reported to appropriate personnel

4. Conduct pre-race tyre and wheel preparation

4.1 Recommended cold tyre inflation pressures and optimum operating pressure requirements are sourced and interpreted

4.2 Tyre inflation pressures are set to specifications according to manufacturer specifications, team procedures and safety requirements

4.3 Base line tyre temperature and ambient and traction surface temperatures are measured and documented

4.4 Tyres are buffed, if specified, according to manufacturer specifications, team procedures and environmental requirements

4.5 Tyre warmers are fitted and turned on, if specified and allowed, according to manufacturer and team procedures

5. Conduct post-race tyre and wheel maintenance

5.1 Tyre pressures and temperatures are checked, tyre contact surface is analysed for handling and wear indications, and data is recorded according to team procedures

5.2 Driver or rider is questioned for assessment of vehicle handling characteristics and data is recorded according to team procedures

5.3 Additional data is sourced as required, and corresponding changes to tyres and wheels required for next race are determined

5.4 Tyres are changed to different compound or pattern as required and according to manufacturer specifications and team procedures

5.5 Removed tyres are tagged or marked for data audit trail according to team procedures

6. Complete work processes

6.1 Tyres are packed and stored according to team procedures

6.2 Tyre and wheel stock inventory is assessed, documented and reported to appropriate personnel

6.3 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

6.4 Tools and equipment are checked and stored according to workplace procedures

6.5 Workplace documentation is processed according to workplace and team procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

select, prepare and fit tyres and wheels to two different motor sport competition vehicles in differing conditions, including:

vehicle type

track surface

weather conditions.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to selecting and preparing motor sport tyres and wheels, including procedures for:

manually handling tyres and wheels

selecting and using personal protective equipment (PPE)

environmental requirements, including procedures for trapping, storing and disposing of contaminants released during pre-race preparation and post-race maintenance of tyres and wheels

key requirements of controlling body rules, category rules and supplementary regulations relating to selecting and preparing tyres and wheels for motor sport applications

types, function, application and limitations of wheels and tyres, including:

handling characteristics

supplier tyre markings

procedures for selecting tyres and wheels for motor sport applications, including tyre and wheel considerations for:

vehicle type

track surface

weather conditions

mounting procedures of wheel assemblies to vehicles, including:

tyre and wheel serviceability inspection techniques

mounting sequences and techniques

types of fasteners and locking devices

pre-race tyre and wheel preparation procedures, including:

procedures for checking tyre, track and ambient temperatures

cold and operating or hot pressures of tyres

buffing procedures for tyres

warming procedures for tyres

post-race tyre analysis procedures, including:

tyre contact surface wear analysis

driver or rider questioning techniques

tyre contact surface cleaning procedures

tyre measurement, including stagger calculations

tyre storage procedures, including tyre and wheel stock inventory documentation methods.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Determine and select competition vehicle tyres and wheels

1.1 Job requirements are determined from workplace instructions

1.2 Supplementary regulations and component supplier specifications are sourced and interpreted to gain a competitive advantage

1.3 Specifications are checked against required operating conditions to determine tyre and wheel requirements

1.4 Tyre and wheel assemblies to be used are selected according to job requirements, and are documented and reported to appropriate personnel as required

2. Prepare for mounting work

2.1 Tools and equipment are selected and checked for serviceability

2.2 Work area is cleaned and laid out according to job and team requirements

2.3 Hazards associated with the work are identified and risks are managed according to safety requirements

3. Mount tyre and wheel assembly to vehicle

3.1 Mounting surfaces and threaded components are cleaned, checked for damage, and treated as required

3.2 Tyre and wheel assemblies are selected from stock according to markings and checked against criteria for event

3.3 Tyre and wheel assemblies are inspected for serviceability according to manufacturer and team procedures

3.4 Selected tyres and wheels are mounted to vehicle according to manufacturer specifications and procedures and safety requirements

3.5 Fasteners are tensioned according to component supplier specifications, and fastener locking device is engaged as required according to safety requirements

3.6 Accurate and complete fitting is checked during and after installation according to manufacturer and team procedures

3.7 Problems with tyre and wheel assemblies are reported to appropriate personnel

4. Conduct pre-race tyre and wheel preparation

4.1 Recommended cold tyre inflation pressures and optimum operating pressure requirements are sourced and interpreted

4.2 Tyre inflation pressures are set to specifications according to manufacturer specifications, team procedures and safety requirements

4.3 Base line tyre temperature and ambient and traction surface temperatures are measured and documented

4.4 Tyres are buffed, if specified, according to manufacturer specifications, team procedures and environmental requirements

4.5 Tyre warmers are fitted and turned on, if specified and allowed, according to manufacturer and team procedures

5. Conduct post-race tyre and wheel maintenance

5.1 Tyre pressures and temperatures are checked, tyre contact surface is analysed for handling and wear indications, and data is recorded according to team procedures

5.2 Driver or rider is questioned for assessment of vehicle handling characteristics and data is recorded according to team procedures

5.3 Additional data is sourced as required, and corresponding changes to tyres and wheels required for next race are determined

5.4 Tyres are changed to different compound or pattern as required and according to manufacturer specifications and team procedures

5.5 Removed tyres are tagged or marked for data audit trail according to team procedures

6. Complete work processes

6.1 Tyres are packed and stored according to team procedures

6.2 Tyre and wheel stock inventory is assessed, documented and reported to appropriate personnel

6.3 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

6.4 Tools and equipment are checked and stored according to workplace procedures

6.5 Workplace documentation is processed according to workplace and team procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Specifications must include:

design

quality

materials

equipment

quantities.

Safety requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

manually handling tyres and wheels

selecting and using personal protective equipment (PPE).

Markings must include those of:

scrutineer or category official

team.

Environmental requirements must include:

procedures for trapping, storing and disposing of contaminants released during pre-race preparation and post-race maintenance of tyres and wheels.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Job requirements are determined from workplace instructions 
Supplementary regulations and component supplier specifications are sourced and interpreted to gain a competitive advantage 
Specifications are checked against required operating conditions to determine tyre and wheel requirements 
Tyre and wheel assemblies to be used are selected according to job requirements, and are documented and reported to appropriate personnel as required 
Tools and equipment are selected and checked for serviceability 
Work area is cleaned and laid out according to job and team requirements 
Hazards associated with the work are identified and risks are managed according to safety requirements 
Mounting surfaces and threaded components are cleaned, checked for damage, and treated as required 
Tyre and wheel assemblies are selected from stock according to markings and checked against criteria for event 
Tyre and wheel assemblies are inspected for serviceability according to manufacturer and team procedures 
Selected tyres and wheels are mounted to vehicle according to manufacturer specifications and procedures and safety requirements 
Fasteners are tensioned according to component supplier specifications, and fastener locking device is engaged as required according to safety requirements 
Accurate and complete fitting is checked during and after installation according to manufacturer and team procedures 
Problems with tyre and wheel assemblies are reported to appropriate personnel 
Recommended cold tyre inflation pressures and optimum operating pressure requirements are sourced and interpreted 
Tyre inflation pressures are set to specifications according to manufacturer specifications, team procedures and safety requirements 
Base line tyre temperature and ambient and traction surface temperatures are measured and documented 
Tyres are buffed, if specified, according to manufacturer specifications, team procedures and environmental requirements 
Tyre warmers are fitted and turned on, if specified and allowed, according to manufacturer and team procedures 
Tyre pressures and temperatures are checked, tyre contact surface is analysed for handling and wear indications, and data is recorded according to team procedures 
Driver or rider is questioned for assessment of vehicle handling characteristics and data is recorded according to team procedures 
Additional data is sourced as required, and corresponding changes to tyres and wheels required for next race are determined 
Tyres are changed to different compound or pattern as required and according to manufacturer specifications and team procedures 
Removed tyres are tagged or marked for data audit trail according to team procedures 
Tyres are packed and stored according to team procedures 
Tyre and wheel stock inventory is assessed, documented and reported to appropriate personnel 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected 
Tools and equipment are checked and stored according to workplace procedures 
Workplace documentation is processed according to workplace and team procedures 
Job requirements are determined from workplace instructions 
Supplementary regulations and component supplier specifications are sourced and interpreted to gain a competitive advantage 
Specifications are checked against required operating conditions to determine tyre and wheel requirements 
Tyre and wheel assemblies to be used are selected according to job requirements, and are documented and reported to appropriate personnel as required 
Tools and equipment are selected and checked for serviceability 
Work area is cleaned and laid out according to job and team requirements 
Hazards associated with the work are identified and risks are managed according to safety requirements 
Mounting surfaces and threaded components are cleaned, checked for damage, and treated as required 
Tyre and wheel assemblies are selected from stock according to markings and checked against criteria for event 
Tyre and wheel assemblies are inspected for serviceability according to manufacturer and team procedures 
Selected tyres and wheels are mounted to vehicle according to manufacturer specifications and procedures and safety requirements 
Fasteners are tensioned according to component supplier specifications, and fastener locking device is engaged as required according to safety requirements 
Accurate and complete fitting is checked during and after installation according to manufacturer and team procedures 
Problems with tyre and wheel assemblies are reported to appropriate personnel 
Recommended cold tyre inflation pressures and optimum operating pressure requirements are sourced and interpreted 
Tyre inflation pressures are set to specifications according to manufacturer specifications, team procedures and safety requirements 
Base line tyre temperature and ambient and traction surface temperatures are measured and documented 
Tyres are buffed, if specified, according to manufacturer specifications, team procedures and environmental requirements 
Tyre warmers are fitted and turned on, if specified and allowed, according to manufacturer and team procedures 
Tyre pressures and temperatures are checked, tyre contact surface is analysed for handling and wear indications, and data is recorded according to team procedures 
Driver or rider is questioned for assessment of vehicle handling characteristics and data is recorded according to team procedures 
Additional data is sourced as required, and corresponding changes to tyres and wheels required for next race are determined 
Tyres are changed to different compound or pattern as required and according to manufacturer specifications and team procedures 
Removed tyres are tagged or marked for data audit trail according to team procedures 
Tyres are packed and stored according to team procedures 
Tyre and wheel stock inventory is assessed, documented and reported to appropriate personnel 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected 
Tools and equipment are checked and stored according to workplace procedures 
Workplace documentation is processed according to workplace and team procedures 

Forms

Assessment Cover Sheet

AURMTJ001 - Select and prepare motor sport competition vehicle tyres and wheels
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AURMTJ001 - Select and prepare motor sport competition vehicle tyres and wheels

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: