Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AURPTA007 Mapping and Delivery Guide
Service and repair post boring systems

Version 1.0
Issue Date: November 2018


Qualification -
Unit of Competency AURPTA007 - Service and repair post boring systems
Description
Employability Skills
Learning Outcomes and Application This unit describes the performance outcomes required to service and repair faults in the post boring systems of outdoor power equipment according to manufacturer specifications. It involves preparing for the task, determining the service and repair requirements, carrying out the service and repair, performing post-repair testing, and completing workplace processes and documentation.It applies to those working in the outdoor power equipment service and repair industry. The post boring systems may be stand-alone or chainsaw attached, and can be petrol powered or electric powered.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must satisfy NVR/AQTF assessor requirements.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessment must include direct observation of tasks.

Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the post boring systems that they have serviced and repaired, e.g. repair orders.

Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.

The following resources must be made available:

outdoor power equipment repair workplace or simulated workplace

workplace instructions

manufacturer specifications for post boring systems

area and equipment, including PPE, required to safely test post boring systems

two different post boring systems requiring service and repair

tools, equipment and materials appropriate for inspecting, servicing and repairing post boring systems.

Prerequisites/co-requisites
Competency Field Outdoor Power Equipment
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to service and repair post boring system
  • Job requirements are determined from workplace instructions
  • Service and repair procedures and information are sourced and interpreted
  • Hazards associated with the work are identified and risks are managed
  • Tools, equipment and materials are selected and checked for serviceability
       
Element: Determine service and repair requirements of post boring system
  • System is inspected and tested according to manufacturer specifications, workplace procedures, and safety requirements
  • Faults are identified from inspection and causes of faults are determined
  • Inspection findings and test results are reported according to workplace procedures, and include recommendations for necessary service, repair or adjustment
  • Authorisation to proceed with service and repair is obtained according to workplace procedures
       
Element: Carry out service and repair activities
  • Service and repair options are analysed and those most appropriate to the circumstances are selected
  • Tools, equipment and materials are selected and checked
  • Components are removed and inspected for serviceability according to manufacturer specifications, workplace procedures, and safety requirements
  • Reusable, repaired and replacement components are fitted and adjusted according to manufacturer specifications and workplace procedures
       
Element: Check post boring system for normal operation
  • System is operated and compared to manufacturer specifications according to workplace procedures and safety requirements
  • Adjustments are made as required and post boring system is re-tested
       
Element: Complete work processes
  • Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including protective guards, cowlings and safety features
  • Work area is cleaned, waste and non-recyclable material are disposed of and recyclable material is collected
  • Tools and equipment are checked and stored according to workplace procedures
  • Workplace documentation is processed according to workplace procedures
       
Element: Prepare to service and repair post boring system
  • Job requirements are determined from workplace instructions
  • Service and repair procedures and information are sourced and interpreted
  • Hazards associated with the work are identified and risks are managed
  • Tools, equipment and materials are selected and checked for serviceability
       
Element: Determine service and repair requirements of post boring system
  • System is inspected and tested according to manufacturer specifications, workplace procedures, and safety requirements
  • Faults are identified from inspection and causes of faults are determined
  • Inspection findings and test results are reported according to workplace procedures, and include recommendations for necessary service, repair or adjustment
  • Authorisation to proceed with service and repair is obtained according to workplace procedures
       
Element: Carry out service and repair activities
  • Service and repair options are analysed and those most appropriate to the circumstances are selected
  • Tools, equipment and materials are selected and checked
  • Components are removed and inspected for serviceability according to manufacturer specifications, workplace procedures, and safety requirements
  • Reusable, repaired and replacement components are fitted and adjusted according to manufacturer specifications and workplace procedures
       
Element: Check post boring system for normal operation
  • System is operated and compared to manufacturer specifications according to workplace procedures and safety requirements
  • Adjustments are made as required and post boring system is re-tested
       
Element: Complete work processes
  • Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including protective guards, cowlings and safety features
  • Work area is cleaned, waste and non-recyclable material are disposed of and recyclable material is collected
  • Tools and equipment are checked and stored according to workplace procedures
  • Workplace documentation is processed according to workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to service and repair post boring system

1.1 Job requirements are determined from workplace instructions

1.2 Service and repair procedures and information are sourced and interpreted

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools, equipment and materials are selected and checked for serviceability

2. Determine service and repair requirements of post boring system

2.1 System is inspected and tested according to manufacturer specifications, workplace procedures, and safety requirements

2.2 Faults are identified from inspection and causes of faults are determined

2.3 Inspection findings and test results are reported according to workplace procedures, and include recommendations for necessary service, repair or adjustment

2.4 Authorisation to proceed with service and repair is obtained according to workplace procedures

3. Carry out service and repair activities

3.1 Service and repair options are analysed and those most appropriate to the circumstances are selected

3.2 Tools, equipment and materials are selected and checked

3.3 Components are removed and inspected for serviceability according to manufacturer specifications, workplace procedures, and safety requirements

3.4 Reusable, repaired and replacement components are fitted and adjusted according to manufacturer specifications and workplace procedures

4. Check post boring system for normal operation

4.1 System is operated and compared to manufacturer specifications according to workplace procedures and safety requirements

4.2 Adjustments are made as required and post boring system is re-tested

5. Complete work processes

5.1 Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including protective guards, cowlings and safety features

5.2 Work area is cleaned, waste and non-recyclable material are disposed of and recyclable material is collected

5.3 Tools and equipment are checked and stored according to workplace procedures

5.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

service and repair two different post boring systems.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to servicing and repairing post boring systems, including procedures for:

safely starting and checking operation, adjustment and alignment of post boring system

safely operating overload system

selecting and using personal protective equipment (PPE)

application, purpose and operation of stand-alone or chainsaw attached post boring systems, including:

petrol powered

electric powered

augers and drill bit types and their application

service and repair procedures for post boring systems, including:

drive system gearbox

overload devices

protective guards and cowlings

handle assembly

lubrication systems

chuck assembly

augers and drill bits

clutch drum assembly

reversing system

post-repair testing procedures, including operating system through full operating range.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to service and repair post boring system

1.1 Job requirements are determined from workplace instructions

1.2 Service and repair procedures and information are sourced and interpreted

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools, equipment and materials are selected and checked for serviceability

2. Determine service and repair requirements of post boring system

2.1 System is inspected and tested according to manufacturer specifications, workplace procedures, and safety requirements

2.2 Faults are identified from inspection and causes of faults are determined

2.3 Inspection findings and test results are reported according to workplace procedures, and include recommendations for necessary service, repair or adjustment

2.4 Authorisation to proceed with service and repair is obtained according to workplace procedures

3. Carry out service and repair activities

3.1 Service and repair options are analysed and those most appropriate to the circumstances are selected

3.2 Tools, equipment and materials are selected and checked

3.3 Components are removed and inspected for serviceability according to manufacturer specifications, workplace procedures, and safety requirements

3.4 Reusable, repaired and replacement components are fitted and adjusted according to manufacturer specifications and workplace procedures

4. Check post boring system for normal operation

4.1 System is operated and compared to manufacturer specifications according to workplace procedures and safety requirements

4.2 Adjustments are made as required and post boring system is re-tested

5. Complete work processes

5.1 Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including protective guards, cowlings and safety features

5.2 Work area is cleaned, waste and non-recyclable material are disposed of and recyclable material is collected

5.3 Tools and equipment are checked and stored according to workplace procedures

5.4 Workplace documentation is processed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Service and repair procedures must include:

inspecting, repairing and replacing components

testing repaired unit, including overload protection.

Safety requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

safely starting and checking operation, adjustment and alignment of post boring system

safely operating overload system

selecting and using personal protective equipment (PPE).

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Job requirements are determined from workplace instructions 
Service and repair procedures and information are sourced and interpreted 
Hazards associated with the work are identified and risks are managed 
Tools, equipment and materials are selected and checked for serviceability 
System is inspected and tested according to manufacturer specifications, workplace procedures, and safety requirements 
Faults are identified from inspection and causes of faults are determined 
Inspection findings and test results are reported according to workplace procedures, and include recommendations for necessary service, repair or adjustment 
Authorisation to proceed with service and repair is obtained according to workplace procedures 
Service and repair options are analysed and those most appropriate to the circumstances are selected 
Tools, equipment and materials are selected and checked 
Components are removed and inspected for serviceability according to manufacturer specifications, workplace procedures, and safety requirements 
Reusable, repaired and replacement components are fitted and adjusted according to manufacturer specifications and workplace procedures 
System is operated and compared to manufacturer specifications according to workplace procedures and safety requirements 
Adjustments are made as required and post boring system is re-tested 
Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including protective guards, cowlings and safety features 
Work area is cleaned, waste and non-recyclable material are disposed of and recyclable material is collected 
Tools and equipment are checked and stored according to workplace procedures 
Workplace documentation is processed according to workplace procedures 
Job requirements are determined from workplace instructions 
Service and repair procedures and information are sourced and interpreted 
Hazards associated with the work are identified and risks are managed 
Tools, equipment and materials are selected and checked for serviceability 
System is inspected and tested according to manufacturer specifications, workplace procedures, and safety requirements 
Faults are identified from inspection and causes of faults are determined 
Inspection findings and test results are reported according to workplace procedures, and include recommendations for necessary service, repair or adjustment 
Authorisation to proceed with service and repair is obtained according to workplace procedures 
Service and repair options are analysed and those most appropriate to the circumstances are selected 
Tools, equipment and materials are selected and checked 
Components are removed and inspected for serviceability according to manufacturer specifications, workplace procedures, and safety requirements 
Reusable, repaired and replacement components are fitted and adjusted according to manufacturer specifications and workplace procedures 
System is operated and compared to manufacturer specifications according to workplace procedures and safety requirements 
Adjustments are made as required and post boring system is re-tested 
Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including protective guards, cowlings and safety features 
Work area is cleaned, waste and non-recyclable material are disposed of and recyclable material is collected 
Tools and equipment are checked and stored according to workplace procedures 
Workplace documentation is processed according to workplace procedures 

Forms

Assessment Cover Sheet

AURPTA007 - Service and repair post boring systems
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

AURPTA007 - Service and repair post boring systems

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: