Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AURT412645A Mapping and Delivery Guide
Overhaul final drive assemblies

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency AURT412645A - Overhaul final drive assemblies
Description This unit covers the competence required to carry out the overhaul of gear, chain and tracked type final drive assemblies.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application The unit includes identification and confirmation of the work requirement, preparation for work, testing and analysis of results, overhauling of final drive assemblies and completion of work finalisation processes, including clean-up and documentation.Work involved includes light and heavy vehicles, including wheeled and tracked driven, motorcycles and outdoor power equipment.Work requires individuals to demonstrate discretion, judgement and problem-solving skills in managing own work activities and contributing to a productive team environment.Work is carried out in accordance with award provisions.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to undertake the overhaul of final drive assemblies
  • Nature and scope of the work requirements are identified and confirmed
  • OH&S requirements, including individual State/Territory regulatory requirements and personal protection needs are observed throughout the work
  • Procedures and information such as workshop manuals, specifications and tooling, are sourced
  • Method options are analysed and those most appropriate to the circumstances are selected and prepared
  • Technical and/or calibration requirements for the testing and overhaul of final drive assemblies are sourced and support equipment is identified and prepared
  • Warnings in relation to working with gear, chain and tracked type assemblies are observed
       
Element: Test final drive assemblies and analyse result
  • Methods for the conduct of the system tests are implemented in accordance with workplace procedures and manufacturer/component supplier specifications
  • Results are compared with manufacturer/component supplier specifications to indicate compliance or non-compliance
  • Results are documented with evidence and supporting information and recommendation(s) made
  • Report is processed in accordance with workplace procedures
       
Element: Carry out the overhaul
  • Methods for the conduct of the overhaul are implemented in accordance with workplace procedures and manufacturer/component supplier specifications
  • All adjustments made during the overhaul are in accordance with manufacturer/component supplier specifications
       
Element: Prepare vehicle/machine for use or storage
  • Overhaul schedule documentation is completed
  • Final inspection is made to ensure protective guards, safety features and cowlings are in place
  • Final inspection is made to ensure work is to workplace expectations
  • Vehicle/machine is cleaned for use or stored to workplace expectations
  • Job card is processed in accordance with workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

It is essential that competence in this unit signifies ability to transfer competence to changing circumstances and to respond to unusual circumstances in the critical aspects of:

observing safety procedures and requirements

communicating effectively with others involved in or affected by the work

selecting methods and techniques appropriate to the circumstances

completing preparatory activity in a systematic manner

identification of the application, purpose and operation

application of the full overhaul sequence as per the Range Statement relative to the qualification being sought

interpreting the test results

conducting the overhaul in accordance with workplace and manufacturer/component supplier requirements

completing overhaul of the final drive assembly and associated components within workplace timeframes

presentation of vehicle/machine to customer in compliance with workplace requirements

Context of, and specific resources for assessment

Application of competence is to be assessed in the workplace or simulated worksite

Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints

Assessment is to comply with regulatory requirements, including Australian Standards

The following resources should be made available:

workplace location or simulated workplace

materials relevant to the overhaul of final drive assemblies

equipment, hand and power tooling appropriate to the overhaul of final drive assemblies

activities covering the mandatory task requirements

specifications and work instructions

Method of assessment

Assessment must satisfy the endorsed assessment guidelines of the automotive industry's RS&R Training Package

Assessment methods must confirm consistency and accuracy of performance together with application of underpinning knowledge

Assessment must be by direct observation of tasks, with questioning on underpinning knowledge and it must also reinforce the integration of key competencies

Assessment may be applied under project related conditions (real or simulated) and require evidence of process

Assessment must confirm a reasonable inference that competence is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances

It is preferable assessment reflects a process rather than an event and occurs over a period of time to cover the varying quality circumstances. Evidence of performance may be provided by customers, team leaders/members or other appropriate persons subject to agreed authentication arrangements

Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role

Guidance information for assessment


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

apply research and interpretive skills sufficient to locate, interpret and apply manufacturer/component supplier procedures, workplace policies and procedures

apply analytical skills required for identification and analysis of technical information

apply plain English literacy and communication skills in relation to dealing with customers and team members

apply questioning and active listening skills for example when obtaining information from customers

apply oral communication skills sufficient to convey information and concepts to customers

apply planning and organising skills to own work activities, including making good use of time and resources, sorting out priorities and monitoring own performance

interact effectively with other persons both on a one-to-one basis and in groups, including understanding and responding to the needs of a customer and working effectively as a member of a team to achieve a shared goal

the capacity to apply problem-solving strategies in purposeful ways, both in situations where the problem and desired solution are clearly evident and in situations requiring critical thinking and a creative approach to achieve an outcome

use mathematical ideas and techniques to calculate time, assess tolerances, apply accurate measurements, calculate material requirements and establish quality checks

use workplace technology related to the overhaul of final drive assemblies, including the use of measuring equipment, computerised technology and communication devices and reporting/documenting of results

Required knowledge

A working knowledge of:

OH&S and environmental regulations/requirements, equipment, material and personal safety requirements

dangers of working with wheeled and tracked type vehicles and equipment

identification of the application, purpose and operation

identification of component parts to include physical, fluid, gases and heat generation

identification of wear evaluation methods

types and layout of service/repair manuals (hard copy and electronic)

final drive assembly test procedures

final drive assembly overhaul procedures

enterprise quality procedures

work organisation and planning processes

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Overhaul methods and sequences

Overhaul methods and sequences are to include the complete dismantling of component parts, measuring and evaluation of wear, the replacement, repair, rebuilding or reconditioning of parts comparable to original parts, the assembly of parts, performance of functional testing and the completion of records

OH&S

OH&S requirements are to be in accordance with legislation/regulations/codes of practice and enterprise safety policies and procedures. This may include protective clothing and equipment, use of tooling and equipment, workplace environment and safety, handling of materials, use of fire fighting equipment, enterprise first aid, hazard control and hazardous materials and substances

Personal protective equipment

Personal protective equipment is to include that prescribed under legislation/regulations/codes of practice and workplace policies and practices

Safe operating procedures

Safe operating procedures are to include, but are not limited to the conduct of operational risk assessment and treatments associated with vehicular movement, toxic substances, electrical safety, machinery movement and operation, manual and mechanical lifting and shifting, working in proximity to others and site visitors

Emergency procedures

Emergency procedures related to this unit are to include, but are not limited to emergency shutdown and stopping of equipment, extinguishing fires, enterprise first aid requirements and site evacuation

Environmental requirements

Environmental requirements are to include but are not limited to waste management, noise, dust and clean-up management

Quality requirements

Quality requirements are to include, but are not limited to regulations, including Australian Standards, internal company quality policy and standards and enterprise operations and procedures

Statutory/regulatory authorities

Statutory/regulatory authorities may include Federal, State/Territory and local authorities administering acts, regulations and codes of practice

Tooling and equipment

Tooling and equipment may include hand tooling, meters, gauges and load testing devices

Materials

Materials may include lubricants, spare parts and cleaning materials

Communications

Communications are to include, but are not limited to verbal and visual instructions and fault reporting and may include site specific instructions, written instructions, plans or instructions related to job/task, telephones and pagers

Information/documents

Sources of information/documents may include:

verbal or written and graphical instructions, signage, work schedules/plans/specifications, work bulletins, memos, material safety data sheets, diagrams or sketches

safe work procedures related to the overhaul of final drive assemblies

regulatory/legislative requirements pertaining to the automotive industry, including Australian Design Rules

engineer's design specifications and instructions

organisation work specifications and requirements

instructions issued by authorised enterprise or external persons

Australian Standards

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Nature and scope of the work requirements are identified and confirmed 
OH&S requirements, including individual State/Territory regulatory requirements and personal protection needs are observed throughout the work 
Procedures and information such as workshop manuals, specifications and tooling, are sourced 
Method options are analysed and those most appropriate to the circumstances are selected and prepared 
Technical and/or calibration requirements for the testing and overhaul of final drive assemblies are sourced and support equipment is identified and prepared 
Warnings in relation to working with gear, chain and tracked type assemblies are observed 
Methods for the conduct of the system tests are implemented in accordance with workplace procedures and manufacturer/component supplier specifications 
Results are compared with manufacturer/component supplier specifications to indicate compliance or non-compliance 
Results are documented with evidence and supporting information and recommendation(s) made 
Report is processed in accordance with workplace procedures 
Methods for the conduct of the overhaul are implemented in accordance with workplace procedures and manufacturer/component supplier specifications 
All adjustments made during the overhaul are in accordance with manufacturer/component supplier specifications 
Overhaul schedule documentation is completed 
Final inspection is made to ensure protective guards, safety features and cowlings are in place 
Final inspection is made to ensure work is to workplace expectations 
Vehicle/machine is cleaned for use or stored to workplace expectations 
Job card is processed in accordance with workplace procedures 

Forms

Assessment Cover Sheet

AURT412645A - Overhaul final drive assemblies
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

AURT412645A - Overhaul final drive assemblies

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: