Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AURTTQ002 Mapping and Delivery Guide
Remove and refit driveline components

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency AURTTQ002 - Remove and refit driveline components
Description
Employability Skills
Learning Outcomes and Application This unit describes the performance outcomes required to remove and refit driveline components. It involves preparing for the task, testing, removing, refitting and adjusting driveline components, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The driveline systems include those of light vehicles, four wheel drive (4WD) vehicles, and light commercial vehicles.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must satisfy NVR/AQTF assessor requirements.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessment must include direct observation of tasks.

Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the driveline components that they have removed and refitted, e.g. repair orders.

Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application

The following resources must be made available:

workplace location or simulated workplace

workplace instructions

vehicle driveline specifications

driveline components specified in the performance evidence

tools, equipment and materials for removing and refitting driveline components.
Prerequisites/co-requisites
Competency Field Mechanical Miscellaneous
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to test and remove driveline components
  • Job requirements are determined from workplace instructions
  • Driveline removal, refit and adjustment procedures and information are sourced and interpreted
  • Driveline testing procedures are sourced and interpreted from manufacturer specifications
  • Hazards associated with the work are identified and risks are managed
  • Tools and equipment are selected and checked for serviceability
       
Element: Test and remove driveline components
  • Driveline is tested according to manufacturer specifications, workplace procedures and safety requirements
  • Driveline components are removed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
  • Driveline components are inspected for faults according to manufacturer specifications, workplace procedures and safety requirements
  • Results of driveline tests are reported according to workplace procedures
       
Element: Refit and adjust driveline components
  • Driveline components are examined for serviceability prior to commencing the refitting procedures
  • Driveline serviceable components are refitted according to manufacturer specifications, workplace procedures and safety requirements
  • Driveline is lubricated and adjusted according to manufacturer specifications, workplace procedures and safety requirements
  • Driveline is checked for correct assembly and operation according to manufacturer specifications and workplace procedures
       
Element: Complete work processes
  • Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use
  • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • Tools and equipment are checked and stored according to workplace procedures
  • Workplace documentation is processed according to workplace procedures
       
Element: Prepare to test and remove driveline components
  • Job requirements are determined from workplace instructions
  • Driveline removal, refit and adjustment procedures and information are sourced and interpreted
  • Driveline testing procedures are sourced and interpreted from manufacturer specifications
  • Hazards associated with the work are identified and risks are managed
  • Tools and equipment are selected and checked for serviceability
       
Element: Test and remove driveline components
  • Driveline is tested according to manufacturer specifications, workplace procedures and safety requirements
  • Driveline components are removed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
  • Driveline components are inspected for faults according to manufacturer specifications, workplace procedures and safety requirements
  • Results of driveline tests are reported according to workplace procedures
       
Element: Refit and adjust driveline components
  • Driveline components are examined for serviceability prior to commencing the refitting procedures
  • Driveline serviceable components are refitted according to manufacturer specifications, workplace procedures and safety requirements
  • Driveline is lubricated and adjusted according to manufacturer specifications, workplace procedures and safety requirements
  • Driveline is checked for correct assembly and operation according to manufacturer specifications and workplace procedures
       
Element: Complete work processes
  • Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use
  • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • Tools and equipment are checked and stored according to workplace procedures
  • Workplace documentation is processed according to workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to test and remove driveline components

1.1 Job requirements are determined from workplace instructions

1.2 Driveline removal, refit and adjustment procedures and information are sourced and interpreted

1.3 Driveline testing procedures are sourced and interpreted from manufacturer specifications

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools and equipment are selected and checked for serviceability

2. Test and remove driveline components

2.1 Driveline is tested according to manufacturer specifications, workplace procedures and safety requirements

2.2 Driveline components are removed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems

2.3 Driveline components are inspected for faults according to manufacturer specifications, workplace procedures and safety requirements

2.4 Results of driveline tests are reported according to workplace procedures

3. Refit and adjust driveline components

3.1 Driveline components are examined for serviceability prior to commencing the refitting procedures

3.2 Driveline serviceable components are refitted according to manufacturer specifications, workplace procedures and safety requirements

3.3 Driveline is lubricated and adjusted according to manufacturer specifications, workplace procedures and safety requirements

3.4 Driveline is checked for correct assembly and operation according to manufacturer specifications and workplace procedures

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

remove and refit the following driveline components:

both drive shafts of a front wheel drive light vehicle

drive shaft of a rear wheel drive light vehicle.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to removing and refitting driveline components, including procedures for:

using driveline tools and equipment

lifting and supporting vehicles

principles of driveline operation

construction of drive shafts, including:

constant velocity (CV) joints

universal joints

driveline test procedures

dismantling, assembling and adjusting procedures, including:

types and applications of lubricants

methods of fitting retaining clips to CV joints.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to test and remove driveline components

1.1 Job requirements are determined from workplace instructions

1.2 Driveline removal, refit and adjustment procedures and information are sourced and interpreted

1.3 Driveline testing procedures are sourced and interpreted from manufacturer specifications

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools and equipment are selected and checked for serviceability

2. Test and remove driveline components

2.1 Driveline is tested according to manufacturer specifications, workplace procedures and safety requirements

2.2 Driveline components are removed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems

2.3 Driveline components are inspected for faults according to manufacturer specifications, workplace procedures and safety requirements

2.4 Results of driveline tests are reported according to workplace procedures

3. Refit and adjust driveline components

3.1 Driveline components are examined for serviceability prior to commencing the refitting procedures

3.2 Driveline serviceable components are refitted according to manufacturer specifications, workplace procedures and safety requirements

3.3 Driveline is lubricated and adjusted according to manufacturer specifications, workplace procedures and safety requirements

3.4 Driveline is checked for correct assembly and operation according to manufacturer specifications and workplace procedures

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

using driveline tools and equipment

lifting and supporting vehicles.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Job requirements are determined from workplace instructions 
Driveline removal, refit and adjustment procedures and information are sourced and interpreted 
Driveline testing procedures are sourced and interpreted from manufacturer specifications 
Hazards associated with the work are identified and risks are managed 
Tools and equipment are selected and checked for serviceability 
Driveline is tested according to manufacturer specifications, workplace procedures and safety requirements 
Driveline components are removed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems 
Driveline components are inspected for faults according to manufacturer specifications, workplace procedures and safety requirements 
Results of driveline tests are reported according to workplace procedures 
Driveline components are examined for serviceability prior to commencing the refitting procedures 
Driveline serviceable components are refitted according to manufacturer specifications, workplace procedures and safety requirements 
Driveline is lubricated and adjusted according to manufacturer specifications, workplace procedures and safety requirements 
Driveline is checked for correct assembly and operation according to manufacturer specifications and workplace procedures 
Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected 
Tools and equipment are checked and stored according to workplace procedures 
Workplace documentation is processed according to workplace procedures 
Job requirements are determined from workplace instructions 
Driveline removal, refit and adjustment procedures and information are sourced and interpreted 
Driveline testing procedures are sourced and interpreted from manufacturer specifications 
Hazards associated with the work are identified and risks are managed 
Tools and equipment are selected and checked for serviceability 
Driveline is tested according to manufacturer specifications, workplace procedures and safety requirements 
Driveline components are removed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems 
Driveline components are inspected for faults according to manufacturer specifications, workplace procedures and safety requirements 
Results of driveline tests are reported according to workplace procedures 
Driveline components are examined for serviceability prior to commencing the refitting procedures 
Driveline serviceable components are refitted according to manufacturer specifications, workplace procedures and safety requirements 
Driveline is lubricated and adjusted according to manufacturer specifications, workplace procedures and safety requirements 
Driveline is checked for correct assembly and operation according to manufacturer specifications and workplace procedures 
Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected 
Tools and equipment are checked and stored according to workplace procedures 
Workplace documentation is processed according to workplace procedures 

Forms

Assessment Cover Sheet

AURTTQ002 - Remove and refit driveline components
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AURTTQ002 - Remove and refit driveline components

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: