AURVTG003 - Remove and install butyl sealed windscreens Competency Mapping Template

Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AURVTG003 Mapping and Delivery Guide
Remove and install butyl sealed windscreens

Version 1.0
Issue Date: May 2024

Qualification	-	Unit of Competency	AURVTG003 - Remove and install butyl sealed windscreens
Description
Employability Skills
Learning Outcomes and Application	This unit describes the performance outcomes required to remove and install butyl sealed windscreens. It involves preparing for the task, selecting and using specialist tools and equipment, and removal procedures, applying butyl sealants, installing windscreen according to manufacturer specifications, cleaning and finishing the windscreen, and completing workplace processes and documentation.It applies to those working in the automotive glazing service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Duration and Setting	X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting. Assessors must satisfy NVR/AQTF assessor requirements. Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting. Assessment must include direct observation of task. Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the butyl sealed windscreens they have removed and installed, e.g. work orders. Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application. The following resources must be made available: automotive glazing workplace, off-site workplace location or simulated workplace workplace instructions SDS for butyl sealants PPE required to remove and install butyl sealed windscreens vehicle manufacturer, windscreen supplier, and specific workplace technical specifications two different vehicles or frames requiring windscreen to be fitted using butyl sealed techniques vehicle protection covers cleaning agents tools, equipment and materials appropriate for removing and installing butyl sealed windscreens.
Prerequisites/co-requisites
Competency Field	Vehicle Body

Development and validation strategy and guide for assessors and learners		Student Learning Resources	Handouts Activities	Slides PPT	Assessment 1	Assessment 2	Assessment 3	Assessment 4
Elements of Competency	Performance Criteria
Element: Prepare for removal and installation of butyl sealed windscreen	Job requirements are determined from workplace instructions Removal and installation information is accessed and interpreted from windscreen manufacturer specifications, workplace procedures, and butyl sealant safety data sheets (SDS) Work is planned to minimise waste and use time efficiently Vehicle is inspected to ensure there is no prior damage and that all related accessories are operating correctly Glazing materials and windscreen are selected to meet windscreen specifications and are inspected for quality Hazards associated with the work are identified and risks are managed Tools and equipment are selected and checked for serviceability Vehicle is protected and safely located according to workplace procedures
Element: Carry out removal and installation activities	Windscreen is removed according to manufacturer specifications, and safety and environmental requirements, and without causing damage to vehicle or components Replacement windscreen is installed, sealed and finished according to manufacturer specifications and safety and environmental requirements Adhesive is cured according to adhesive manufacturer specifications and timelines, as required
Element: Complete work processes	Final inspection of butyl sealed windscreen is made to ensure work meets workplace expectations, related accessories are operating correctly, and vehicle is presented ready for use Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored Tools and equipment are checked, reported if faulty, and stored according to workplace procedures Workplace documentation is processed according to workplace procedures
Element: Prepare for removal and installation of butyl sealed windscreen	Job requirements are determined from workplace instructions Removal and installation information is accessed and interpreted from windscreen manufacturer specifications, workplace procedures, and butyl sealant safety data sheets (SDS) Work is planned to minimise waste and use time efficiently Vehicle is inspected to ensure there is no prior damage and that all related accessories are operating correctly Glazing materials and windscreen are selected to meet windscreen specifications and are inspected for quality Hazards associated with the work are identified and risks are managed Tools and equipment are selected and checked for serviceability Vehicle is protected and safely located according to workplace procedures
Element: Carry out removal and installation activities	Windscreen is removed according to manufacturer specifications, and safety and environmental requirements, and without causing damage to vehicle or components Replacement windscreen is installed, sealed and finished according to manufacturer specifications and safety and environmental requirements Adhesive is cured according to adhesive manufacturer specifications and timelines, as required
Element: Complete work processes	Final inspection of butyl sealed windscreen is made to ensure work meets workplace expectations, related accessories are operating correctly, and vehicle is presented ready for use Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored Tools and equipment are checked, reported if faulty, and stored according to workplace procedures Workplace documentation is processed according to workplace procedures

Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare for removal and installation of butyl sealed windscreen

1.1 Job requirements are determined from workplace instructions

1.2 Removal and installation information is accessed and interpreted from windscreen manufacturer specifications, workplace procedures, and butyl sealant safety data sheets (SDS)

1.3 Work is planned to minimise waste and use time efficiently

1.4 Vehicle is inspected to ensure there is no prior damage and that all related accessories are operating correctly

1.5 Glazing materials and windscreen are selected to meet windscreen specifications and are inspected for quality

1.6 Hazards associated with the work are identified and risks are managed

1.7 Tools and equipment are selected and checked for serviceability

1.8 Vehicle is protected and safely located according to workplace procedures

2. Carry out removal and installation activities

2.1 Windscreen is removed according to manufacturer specifications, and safety and environmental requirements, and without causing damage to vehicle or components

2.2 Replacement windscreen is installed, sealed and finished according to manufacturer specifications and safety and environmental requirements

2.3 Adhesive is cured according to adhesive manufacturer specifications and timelines, as required

3. Complete work processes

3.1 Final inspection of butyl sealed windscreen is made to ensure work meets workplace expectations, related accessories are operating correctly, and vehicle is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unitâ€™s elements, performance criteria, range of conditions and foundation skills:

remove and install butyl sealed windscreens on two different vehicles.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to removing and installing butyl sealed windscreens, including procedures for:

selecting and using personal protective equipment (PPE)

using safety data sheets (SDS) for butyl sealants

material handling and storage

environmental requirements, including procedures for trapping, storing and disposing of waste materials and chemicals

removal and installation methods and techniques for butyl sealed windscreens, including:

type and use of windscreen specialist tools and equipment

vehicle manufacturer or specific workplace technical specifications

windscreen handling techniques

butyl sealing methods

procedures for protecting vehicle and components during windscreen removal and installation

procedures for final inspection of fitted butyl sealed windscreens.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title] Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.