Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AURVTN041 Mapping and Delivery Guide
Remove and realign vehicle body panels

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency AURVTN041 - Remove and realign vehicle body panels
Description
Employability Skills
Learning Outcomes and Application This unit describes the performance outcomes required to remove and realign vehicle body panels. It involves planning and preparing for the task, identifying types and construction of vehicle body panels, selecting and using tools and equipment, removing, dismantling, reassembling, refitting and realigning body panels, and maintaining the work area, tools and equipment.It applies to those undertaking a Vocational Education and Training in Schools (VETiS) or pre-vocational qualification as preparation to entering the automotive service and repair or automotive manufacturing industry. The unit is designed for use in a highly supervised context and is not suitable for use in a vocational qualification.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must satisfy NVR/AQTF assessor requirements.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessment must include direct observation.

Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the body panels that they have removed and realigned, e.g. repair orders.

Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.

The following resources must be made available:

automotive repair workplace or simulated workplace

PPE for removing and realigning vehicle body panels

two different vehicle body panels as specified in the performance evidence requiring removal and realignment

tools, equipment and materials appropriate for removing and realigning vehicle body panels.
Prerequisites/co-requisites
Competency Field Vehicle Body
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to remove and realign body panel
  • Task instructions are interpreted and vehicle body panel to be worked on is identified
  • Manufacturer specifications and workplace procedures for removing and aligning body panel are sourced and interpreted
  • Safety requirements are sourced and interpreted
  • Potential hazards and risks associated with task are identified and reported to workplace supervisor
  • Tools and equipment required for removing and aligning body panel are identified and checked for serviceability
       
Element: Remove body panel
  • Body panel is removed according toworkplace procedures and safety requirements, and without causing damage to components, tools or equipment
  • Body panel is dismantled according toworkplace procedures and safety requirements
  • Body panel is inspected according to manufacturer specifications
  • Body panel inspection results are recorded
       
Element: Replace and realign body panel
  • Body panel is reassembled according tomanufacturer specifications, workplace procedures and safety requirements
  • Body panel is refitted to vehicle according tomanufacturer specifications, workplace procedures and safety requirements, and without causing damage to components, tools or equipment
  • Body panel is adjusted and aligned to vehicle according tomanufacturer specifications, workplace procedures and safety requirements
  • Body panel is inspected to ensure its correct alignment to vehicle
  • Alignment inspection results are recorded
       
Element: Complete work processes
  • Final inspection is made to ensure work meets task instructions and workplace standards, and vehicle is presented ready for use, further processes, or storage according to workplace procedures
  • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures
  • Tools and equipment are checked and stored according to workplace procedures, or tagged and reported as required
  • Workplace documentation is processed according to workplace procedures
       
Element: Prepare to remove and realign body panel
  • Task instructions are interpreted and vehicle body panel to be worked on is identified
  • Manufacturer specifications and workplace procedures for removing and aligning body panel are sourced and interpreted
  • Safety requirements are sourced and interpreted
  • Potential hazards and risks associated with task are identified and reported to workplace supervisor
  • Tools and equipment required for removing and aligning body panel are identified and checked for serviceability
       
Element: Remove body panel
  • Body panel is removed according toworkplace procedures and safety requirements, and without causing damage to components, tools or equipment
  • Body panel is dismantled according toworkplace procedures and safety requirements
  • Body panel is inspected according to manufacturer specifications
  • Body panel inspection results are recorded
       
Element: Replace and realign body panel
  • Body panel is reassembled according tomanufacturer specifications, workplace procedures and safety requirements
  • Body panel is refitted to vehicle according tomanufacturer specifications, workplace procedures and safety requirements, and without causing damage to components, tools or equipment
  • Body panel is adjusted and aligned to vehicle according tomanufacturer specifications, workplace procedures and safety requirements
  • Body panel is inspected to ensure its correct alignment to vehicle
  • Alignment inspection results are recorded
       
Element: Complete work processes
  • Final inspection is made to ensure work meets task instructions and workplace standards, and vehicle is presented ready for use, further processes, or storage according to workplace procedures
  • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures
  • Tools and equipment are checked and stored according to workplace procedures, or tagged and reported as required
  • Workplace documentation is processed according to workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to remove and realign body panel

1.1 Task instructions are interpreted and vehicle body panel to be worked on is identified

1.2 Manufacturer specifications and workplace procedures for removing and aligning body panel are sourced and interpreted

1.3 Safety requirements are sourced and interpreted

1.4 Potential hazards and risks associated with task are identified and reported to workplace supervisor

1.5 Tools and equipment required for removing and aligning body panel are identified and checked for serviceability

2. Remove body panel

2.1 Body panel is removed according toworkplace procedures and safety requirements, and without causing damage to components, tools or equipment

2.2 Body panel is dismantled according toworkplace procedures and safety requirements

2.3 Body panel is inspected according to manufacturer specifications

2.4 Body panel inspection results are recorded

3. Replace and realign body panel

3.1 Body panel is reassembled according tomanufacturer specifications, workplace procedures and safety requirements

3.2 Body panel is refitted to vehicle according tomanufacturer specifications, workplace procedures and safety requirements, and without causing damage to components, tools or equipment

3.3 Body panel is adjusted and aligned to vehicle according tomanufacturer specifications, workplace procedures and safety requirements

3.4 Body panel is inspected to ensure its correct alignment to vehicle

3.5 Alignment inspection results are recorded

4. Complete work processes

4.1 Final inspection is made to ensure work meets task instructions and workplace standards, and vehicle is presented ready for use, further processes, or storage according to workplace procedures

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

4.3 Tools and equipment are checked and stored according to workplace procedures, or tagged and reported as required

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

remove and realign the following two different vehicle body panels:

one vehicle mud guard

one vehicle door.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to removing and realigning vehicle body panels, including procedures for:

selecting and using personal protective equipment (PPE), including safety glasses, ear protection and safety footwear

using hand tools

types and construction of vehicle body panels

body panel removal, dismantling, assembly and replacement procedures

body panel measurement and alignment procedures.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to remove and realign body panel

1.1 Task instructions are interpreted and vehicle body panel to be worked on is identified

1.2 Manufacturer specifications and workplace procedures for removing and aligning body panel are sourced and interpreted

1.3 Safety requirements are sourced and interpreted

1.4 Potential hazards and risks associated with task are identified and reported to workplace supervisor

1.5 Tools and equipment required for removing and aligning body panel are identified and checked for serviceability

2. Remove body panel

2.1 Body panel is removed according toworkplace procedures and safety requirements, and without causing damage to components, tools or equipment

2.2 Body panel is dismantled according toworkplace procedures and safety requirements

2.3 Body panel is inspected according to manufacturer specifications

2.4 Body panel inspection results are recorded

3. Replace and realign body panel

3.1 Body panel is reassembled according tomanufacturer specifications, workplace procedures and safety requirements

3.2 Body panel is refitted to vehicle according tomanufacturer specifications, workplace procedures and safety requirements, and without causing damage to components, tools or equipment

3.3 Body panel is adjusted and aligned to vehicle according tomanufacturer specifications, workplace procedures and safety requirements

3.4 Body panel is inspected to ensure its correct alignment to vehicle

3.5 Alignment inspection results are recorded

4. Complete work processes

4.1 Final inspection is made to ensure work meets task instructions and workplace standards, and vehicle is presented ready for use, further processes, or storage according to workplace procedures

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

4.3 Tools and equipment are checked and stored according to workplace procedures, or tagged and reported as required

4.4 Workplace documentation is processed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using personal protective equipment (PPE), including safety glasses, ear protection and safety footwear

using hand tools.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Task instructions are interpreted and vehicle body panel to be worked on is identified 
Manufacturer specifications and workplace procedures for removing and aligning body panel are sourced and interpreted 
Safety requirements are sourced and interpreted 
Potential hazards and risks associated with task are identified and reported to workplace supervisor 
Tools and equipment required for removing and aligning body panel are identified and checked for serviceability 
Body panel is removed according toworkplace procedures and safety requirements, and without causing damage to components, tools or equipment 
Body panel is dismantled according toworkplace procedures and safety requirements 
Body panel is inspected according to manufacturer specifications 
Body panel inspection results are recorded 
Body panel is reassembled according tomanufacturer specifications, workplace procedures and safety requirements 
Body panel is refitted to vehicle according tomanufacturer specifications, workplace procedures and safety requirements, and without causing damage to components, tools or equipment 
Body panel is adjusted and aligned to vehicle according tomanufacturer specifications, workplace procedures and safety requirements 
Body panel is inspected to ensure its correct alignment to vehicle 
Alignment inspection results are recorded 
Final inspection is made to ensure work meets task instructions and workplace standards, and vehicle is presented ready for use, further processes, or storage according to workplace procedures 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures 
Tools and equipment are checked and stored according to workplace procedures, or tagged and reported as required 
Workplace documentation is processed according to workplace procedures 
Task instructions are interpreted and vehicle body panel to be worked on is identified 
Manufacturer specifications and workplace procedures for removing and aligning body panel are sourced and interpreted 
Safety requirements are sourced and interpreted 
Potential hazards and risks associated with task are identified and reported to workplace supervisor 
Tools and equipment required for removing and aligning body panel are identified and checked for serviceability 
Body panel is removed according toworkplace procedures and safety requirements, and without causing damage to components, tools or equipment 
Body panel is dismantled according toworkplace procedures and safety requirements 
Body panel is inspected according to manufacturer specifications 
Body panel inspection results are recorded 
Body panel is reassembled according tomanufacturer specifications, workplace procedures and safety requirements 
Body panel is refitted to vehicle according tomanufacturer specifications, workplace procedures and safety requirements, and without causing damage to components, tools or equipment 
Body panel is adjusted and aligned to vehicle according tomanufacturer specifications, workplace procedures and safety requirements 
Body panel is inspected to ensure its correct alignment to vehicle 
Alignment inspection results are recorded 
Final inspection is made to ensure work meets task instructions and workplace standards, and vehicle is presented ready for use, further processes, or storage according to workplace procedures 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures 
Tools and equipment are checked and stored according to workplace procedures, or tagged and reported as required 
Workplace documentation is processed according to workplace procedures 

Forms

Assessment Cover Sheet

AURVTN041 - Remove and realign vehicle body panels
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AURVTN041 - Remove and realign vehicle body panels

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: