AURVTP017 - Rectify and touch up vehicle paint faults using clear over base two-pack systems Competency Mapping Template

Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AURVTP017 Mapping and Delivery Guide
Rectify and touch up vehicle paint faults using clear over base two-pack systems

Version 1.0
Issue Date: May 2024

Qualification	-	Unit of Competency	AURVTP017 - Rectify and touch up vehicle paint faults using clear over base two-pack systems
Description
Employability Skills
Learning Outcomes and Application	This unit describes the performance outcomes required to rectify and touch up paint faults on vehicle body components. It involves preparing for the task, selecting and using specialist tools and equipment, identifying and rectifying faults using clear over base (COB) two-pack paint materials according to manufacturer specifications, and completing workplace processes and documentation.It applies to those working in the automotive paint refinishing repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Duration and Setting	X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting. Assessors must satisfy NVR/AQTF assessor requirements. Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting. Assessment must include direct observation of task. Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to vehicle paintwork they have rectified using COB two-pack systems, e.g. repair orders. Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application. The following resources must be made available: automotive repair workplace or simulated workplace workplace instructions TDS and SDS for COB two-pack paint vehicle paint codes and specifications PPE required to rectify COB two-pack paint materials required to rectify and touch up COB two-pack paint three different vehicles requiring COB two-pack paint rectification and touch-up tools, equipment and materials appropriate for rectifying and touching up paint faults using COB two-pack systems.
Prerequisites/co-requisites
Competency Field	Vehicle Body

Development and validation strategy and guide for assessors and learners		Student Learning Resources	Handouts Activities	Slides PPT	Assessment 1	Assessment 2	Assessment 3	Assessment 4
Elements of Competency	Performance Criteria
Element: Prepare to rectify and touch up paint fault	Job requirements are determined from workplace instructions Touch-up information is accessed and interpreted Materials are identified, selected and inspected for quality Hazards associated with the work are identified and risks are managed Painting tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability Work is planned to identify paint rectification methods for COB two-pack systems, minimise waste, and prevent damage to vehicle
Element: Determine paint fault, its cause and rectification requirements	Cause of paint fault is identified from paint manufacturer information and confirmed by appropriate personnel Faulty paintwork is visually inspected to determine extent of damage and areas requiring rectification Damage to paintwork is assessed from visual comparison with undamaged paintwork Fault rectification requirements are determined without causing undue damage to vehicle components or systems
Element: Rectify and touch-up paint faults	Materials required to restore paintwork to pre-damage condition are determined from paint manufacturer recommended procedures Materials are measured, mixed and applied using approved equipment Damaged paintwork is rectified and blended with existing paintwork using COB two-pack system and approved blending and drying techniques Rectification processes are completed according to workplace procedures and safety and environmental requirements, and without causing damage to vehicle components and systems
Element: Complete work processes	Final inspection is made to ensure work meets workplace expectations and vehicle or component is presented ready for use Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored Tools and equipment are checked, reported if faulty, and stored according to workplace procedures Workplace documentation is processed according to workplace procedures
Element: Prepare to rectify and touch up paint fault	Job requirements are determined from workplace instructions Touch-up information is accessed and interpreted Materials are identified, selected and inspected for quality Hazards associated with the work are identified and risks are managed Painting tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability Work is planned to identify paint rectification methods for COB two-pack systems, minimise waste, and prevent damage to vehicle
Element: Determine paint fault, its cause and rectification requirements	Cause of paint fault is identified from paint manufacturer information and confirmed by appropriate personnel Faulty paintwork is visually inspected to determine extent of damage and areas requiring rectification Damage to paintwork is assessed from visual comparison with undamaged paintwork Fault rectification requirements are determined without causing undue damage to vehicle components or systems
Element: Rectify and touch-up paint faults	Materials required to restore paintwork to pre-damage condition are determined from paint manufacturer recommended procedures Materials are measured, mixed and applied using approved equipment Damaged paintwork is rectified and blended with existing paintwork using COB two-pack system and approved blending and drying techniques Rectification processes are completed according to workplace procedures and safety and environmental requirements, and without causing damage to vehicle components and systems
Element: Complete work processes	Final inspection is made to ensure work meets workplace expectations and vehicle or component is presented ready for use Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored Tools and equipment are checked, reported if faulty, and stored according to workplace procedures Workplace documentation is processed according to workplace procedures

Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to rectify and touch up paint fault

1.1 Job requirements are determined from workplace instructions

1.2 Touch-up information is accessed and interpreted

1.3 Materials are identified, selected and inspected for quality

1.4 Hazards associated with the work are identified and risks are managed

1.5 Painting tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability

1.6 Work is planned to identify paint rectification methods for COB two-pack systems, minimise waste, and prevent damage to vehicle

2. Determine paint fault, its cause and rectification requirements

2.1 Cause of paint fault is identified from paint manufacturer information and confirmed by appropriate personnel

2.2 Faulty paintwork is visually inspected to determine extent of damage and areas requiring rectification

2.3 Damage to paintwork is assessed from visual comparison with undamaged paintwork

2.4 Fault rectification requirements are determined without causing undue damage to vehicle components or systems

3. Rectify and touch-up paint faults

3.1 Materials required to restore paintwork to pre-damage condition are determined from paint manufacturer recommended procedures

3.2 Materials are measured, mixed and applied using approved equipment

3.3 Damaged paintwork is rectified and blended with existing paintwork using COB two-pack system and approved blending and drying techniques

3.4 Rectification processes are completed according to workplace procedures and safety and environmental requirements, and without causing damage to vehicle components and systems

4. Complete work processes

4.1 Final inspection is made to ensure work meets workplace expectations and vehicle or component is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unitâ€™s elements, performance criteria, range of conditions and foundation skills:

rectify and touch up faults on three different vehicles using clear over base (COB) two-pack paint materials, including:

using partial blend and fade-out blend on one vehicle

blending and clearing panels on one vehicle.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to rectifying and touching up vehicle paint faults using clear over base two-pack systems, including procedures for:

selecting and using personal protective equipment (PPE)

using technical data sheets (TDS) and safety data sheets (SDS) for COB two-pack paint

handling and storing paint materials

using tools and equipment

environmental requirements, including procedures for trapping, storing and disposing of waste materials

paint manufacturer specifications and paint codes

types and features of two-pack paint materials

types and use of painting equipment, including:

types of spray guns and maintenance requirements

spray gun set-up, use and maintenance

correct use of positive air feed masks

using approved drying area

paint rectification and touch-up techniques and procedures, including:

identifying paint surface faults

surface preparation methods

paint mixing procedures

COB two-pack paint application methods

paint drying methods

procedures for protecting vehicle and components when rectifying and touching up paint

procedures for final inspection of paint rectification and touch-up work using COB two-pack systems.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title] Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.