Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AURVTS006 Mapping and Delivery Guide
Fabricate automotive and marine trim components

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency AURVTS006 - Fabricate automotive and marine trim components
Description
Employability Skills
Learning Outcomes and Application This unit describes the performance outcomes required to measure, mark out, cut and fabricate automotive or marine trim components to given specifications. It involves preparing for the task, selecting and using specialist tools and equipment, checking material quality, calculating material quantity, assembling and trimming components, identifying fabrication defects, and completing workplace processes and documentation.It applies to those working in the automotive and marine trimming industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must satisfy NVR/AQTF assessor requirements.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessment must include direct observation of tasks.

Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the trim components that they have fabricated, e.g. work orders.

Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.

The following resources must be made available:

automotive or marine trimming workplace or simulated workplace

workplace instructions

PPE to fabricate trim components

materials to fabricate trim components

three different automotive or marine components requiring trim

tools, equipment and materials appropriate for fabricating trim components.
Prerequisites/co-requisites
Competency Field Vehicle Body
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to fabricate trim components
  • Job requirements are determined from workplace instructions
  • Materials are selected and inspected for quality
  • Hazards associated with the work are identified and risks are managed
  • Fabrication tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability
  • Work is planned to identify methods for fabricating trim components, minimise waste, and use time effectively
       
Element: Perform fabrication
  • Components are fabricated to specification according to workplace instructions, customer and job requirements, and safety and environmental requirements
  • Fabricated component is inspected against workplace quality requirements and fabrication defects are reported to appropriate personnel according to workplace procedures
       
Element: Complete work processes
  • Final inspection is made to ensure fabrication work meets workplace expectations and component is presented ready for use
  • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • Workplace documentation is processed according to workplace procedures
       
Element: Prepare to fabricate trim components
  • Job requirements are determined from workplace instructions
  • Materials are selected and inspected for quality
  • Hazards associated with the work are identified and risks are managed
  • Fabrication tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability
  • Work is planned to identify methods for fabricating trim components, minimise waste, and use time effectively
       
Element: Perform fabrication
  • Components are fabricated to specification according to workplace instructions, customer and job requirements, and safety and environmental requirements
  • Fabricated component is inspected against workplace quality requirements and fabrication defects are reported to appropriate personnel according to workplace procedures
       
Element: Complete work processes
  • Final inspection is made to ensure fabrication work meets workplace expectations and component is presented ready for use
  • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • Workplace documentation is processed according to workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to fabricate trim components

1.1 Job requirements are determined from workplace instructions

1.2 Materials are selected and inspected for quality

1.3 Hazards associated with the work are identified and risks are managed

1.4 Fabrication tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability

1.5 Work is planned to identify methods for fabricating trim components, minimise waste, and use time effectively

2. Perform fabrication

2.1 Components are fabricated to specification according to workplace instructions, customer and job requirements, and safety and environmental requirements

2.2 Fabricated component is inspected against workplace quality requirements and fabrication defects are reported to appropriate personnel according to workplace procedures

3. Complete work processes

3.1 Final inspection is made to ensure fabrication work meets workplace expectations and component is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

fabricate three different automotive or marine trim components to specifications, including one seat assembly.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to fabricating automotive and marine trim components, including procedures for:

selecting and using personal protective equipment (PPE)

using specialist tools and equipment

environmental requirements, including procedures for storing and disposing of waste materials

types, operation and basic maintenance of fabrication equipment

type of trim materials and their applications

trim component fabrication methods and techniques, including:

material marking out and cutting techniques

fastening and assembly methods, including:

gluing

bonding

sewing

riveting

welding

procedures for identifying material defects

procedures for protecting vehicle or vessel and components during trim work

procedures for final inspection of fabricated trim component.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to fabricate trim components

1.1 Job requirements are determined from workplace instructions

1.2 Materials are selected and inspected for quality

1.3 Hazards associated with the work are identified and risks are managed

1.4 Fabrication tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability

1.5 Work is planned to identify methods for fabricating trim components, minimise waste, and use time effectively

2. Perform fabrication

2.1 Components are fabricated to specification according to workplace instructions, customer and job requirements, and safety and environmental requirements

2.2 Fabricated component is inspected against workplace quality requirements and fabrication defects are reported to appropriate personnel according to workplace procedures

3. Complete work processes

3.1 Final inspection is made to ensure fabrication work meets workplace expectations and component is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Fabrication must include:

measuring, marking and cutting

sewing, fastening and assembling.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using PPE

using specialist tools and equipment

environmental requirements, including procedures for storing and disposing of waste materials.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Job requirements are determined from workplace instructions 
Materials are selected and inspected for quality 
Hazards associated with the work are identified and risks are managed 
Fabrication tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability 
Work is planned to identify methods for fabricating trim components, minimise waste, and use time effectively 
Components are fabricated to specification according to workplace instructions, customer and job requirements, and safety and environmental requirements 
Fabricated component is inspected against workplace quality requirements and fabrication defects are reported to appropriate personnel according to workplace procedures 
Final inspection is made to ensure fabrication work meets workplace expectations and component is presented ready for use 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored 
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures 
Workplace documentation is processed according to workplace procedures 
Job requirements are determined from workplace instructions 
Materials are selected and inspected for quality 
Hazards associated with the work are identified and risks are managed 
Fabrication tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability 
Work is planned to identify methods for fabricating trim components, minimise waste, and use time effectively 
Components are fabricated to specification according to workplace instructions, customer and job requirements, and safety and environmental requirements 
Fabricated component is inspected against workplace quality requirements and fabrication defects are reported to appropriate personnel according to workplace procedures 
Final inspection is made to ensure fabrication work meets workplace expectations and component is presented ready for use 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored 
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures 
Workplace documentation is processed according to workplace procedures 

Forms

Assessment Cover Sheet

AURVTS006 - Fabricate automotive and marine trim components
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AURVTS006 - Fabricate automotive and marine trim components

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: