Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AURVTT008 Mapping and Delivery Guide
Clean vehicle interior trim

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency AURVTT008 - Clean vehicle interior trim
Description
Employability Skills
Learning Outcomes and Application This unit describes the performance outcomes required to clean vehicle interior trim, including vehicle seats and floor coverings. It involves preparing for the task, selecting and using cleaning equipment, products and material, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must satisfy NVR/AQTF assessor requirements.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessment must include direct observation of tasks.

Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the vehicle interior trim that they have cleaned, e.g. work orders.

Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.

The following resources must be made available:

automotive workplace or simulated workplace

workplace instructions

PPE required to clean vehicle interiors

SDS for cleaning products and finishing agents

cleaning and finishing materials

three different vehicles with the interiors specified in the performance evidence requiring cleaning

tools, equipment and materials appropriate for cleaning vehicle interior trim.
Prerequisites/co-requisites
Competency Field Vehicle body
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to clean vehicle interior
  • Job requirements are determined from workplace instructions
  • Cleaning information is sourced and interpreted
  • Cleaning materials are identified, calculated and prepared according to vehicle manufacturer recommendations
  • Hazards associated with the work are identified and risks are managed
  • Cleaning tools and equipment, including personal protective equipment (PPE), are identified and inspected for serviceability
  • Work is planned to identify methods for cleaning vehicle interior, minimise waste, and use time effectively
       
Element: Undertake cleaning activities
  • Interior trim and seats are cleaned according to workplace instructions, customer requirements, and safety and environmental requirements
  • Cleaning and finishing materials and tools are used according to trim and seat fabric type and without causing damage to vehicle or components
  • Manual or machine assisted cleaning methods are used according to workplace procedures
       
Element: Complete work processes
  • Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • Workplace documentation is processed according to workplace procedures
       
Element: Prepare to clean vehicle interior
  • Job requirements are determined from workplace instructions
  • Cleaning information is sourced and interpreted
  • Cleaning materials are identified, calculated and prepared according to vehicle manufacturer recommendations
  • Hazards associated with the work are identified and risks are managed
  • Cleaning tools and equipment, including personal protective equipment (PPE), are identified and inspected for serviceability
  • Work is planned to identify methods for cleaning vehicle interior, minimise waste, and use time effectively
       
Element: Undertake cleaning activities
  • Interior trim and seats are cleaned according to workplace instructions, customer requirements, and safety and environmental requirements
  • Cleaning and finishing materials and tools are used according to trim and seat fabric type and without causing damage to vehicle or components
  • Manual or machine assisted cleaning methods are used according to workplace procedures
       
Element: Complete work processes
  • Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • Workplace documentation is processed according to workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to clean vehicle interior

1.1 Job requirements are determined from workplace instructions

1.2 Cleaning information is sourced and interpreted

1.3 Cleaning materials are identified, calculated and prepared according to vehicle manufacturer recommendations

1.4 Hazards associated with the work are identified and risks are managed

1.5 Cleaning tools and equipment, including personal protective equipment (PPE), are identified and inspected for serviceability

1.6 Work is planned to identify methods for cleaning vehicle interior, minimise waste, and use time effectively

2. Undertake cleaning activities

2.1 Interior trim and seats are cleaned according to workplace instructions, customer requirements, and safety and environmental requirements

2.2 Cleaning and finishing materials and tools are used according to trim and seat fabric type and without causing damage to vehicle or components

2.3 Manual or machine assisted cleaning methods are used according to workplace procedures

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

clean and finish the following interiors of three different vehicles, including:

seats

carpets

mats

dash

arm rests

consoles

door trim.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to cleaning vehicle interior trim, including procedures for:

selecting and using personal protective equipment (PPE)

using safety data sheets (SDS) for cleaning products and finishing agents

using tools and equipment

handling and storing cleaning products

environmental requirements, including procedures for trapping, storing and disposing of waste materials and cleaning agents

types of vehicle interior trim and components specified in the performance evidence

cleaning and finishing products and equipment application methods and techniques

procedures for protecting vehicle interiors while cleaning

procedures for final inspection of cleaned interior.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to clean vehicle interior

1.1 Job requirements are determined from workplace instructions

1.2 Cleaning information is sourced and interpreted

1.3 Cleaning materials are identified, calculated and prepared according to vehicle manufacturer recommendations

1.4 Hazards associated with the work are identified and risks are managed

1.5 Cleaning tools and equipment, including personal protective equipment (PPE), are identified and inspected for serviceability

1.6 Work is planned to identify methods for cleaning vehicle interior, minimise waste, and use time effectively

2. Undertake cleaning activities

2.1 Interior trim and seats are cleaned according to workplace instructions, customer requirements, and safety and environmental requirements

2.2 Cleaning and finishing materials and tools are used according to trim and seat fabric type and without causing damage to vehicle or components

2.3 Manual or machine assisted cleaning methods are used according to workplace procedures

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Cleaning information must include:

manufacturer specifications

safety data sheets (SDS)

workplace procedures.

Materials must include:

cloths

cleaning products

finishing agents.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using PPE

using SDS for cleaning products and finishing agents

using tools and equipment

handling and storing cleaning products

environmental requirements, including procedures for trapping, storing and disposing of waste materials and cleaning agents.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Job requirements are determined from workplace instructions 
Cleaning information is sourced and interpreted 
Cleaning materials are identified, calculated and prepared according to vehicle manufacturer recommendations 
Hazards associated with the work are identified and risks are managed 
Cleaning tools and equipment, including personal protective equipment (PPE), are identified and inspected for serviceability 
Work is planned to identify methods for cleaning vehicle interior, minimise waste, and use time effectively 
Interior trim and seats are cleaned according to workplace instructions, customer requirements, and safety and environmental requirements 
Cleaning and finishing materials and tools are used according to trim and seat fabric type and without causing damage to vehicle or components 
Manual or machine assisted cleaning methods are used according to workplace procedures 
Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored 
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures 
Workplace documentation is processed according to workplace procedures 
Job requirements are determined from workplace instructions 
Cleaning information is sourced and interpreted 
Cleaning materials are identified, calculated and prepared according to vehicle manufacturer recommendations 
Hazards associated with the work are identified and risks are managed 
Cleaning tools and equipment, including personal protective equipment (PPE), are identified and inspected for serviceability 
Work is planned to identify methods for cleaning vehicle interior, minimise waste, and use time effectively 
Interior trim and seats are cleaned according to workplace instructions, customer requirements, and safety and environmental requirements 
Cleaning and finishing materials and tools are used according to trim and seat fabric type and without causing damage to vehicle or components 
Manual or machine assisted cleaning methods are used according to workplace procedures 
Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored 
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures 
Workplace documentation is processed according to workplace procedures 

Forms

Assessment Cover Sheet

AURVTT008 - Clean vehicle interior trim
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AURVTT008 - Clean vehicle interior trim

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: