Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AURVTT015 Mapping and Delivery Guide
Fabricate and install canvas products for automotive and marine components

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency AURVTT015 - Fabricate and install canvas products for automotive and marine components
Description
Employability Skills
Learning Outcomes and Application This unit describes the performance outcomes required to fabricate and install canvas covers and products in automotive and marine components. It involves preparing for the task, selecting and using specialist tools and equipment, selecting materials and checking their quality, measuring and cutting canvas products, and completing workplace processes and documentation.It applies to those working in the automotive and marine trimming industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must satisfy NVR/AQTF assessor requirements.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessment must include direct observation of tasks.

Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the canvas products that they have fabricated and installed, e.g. work orders.

Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.

The following resources must be made available:

automotive or marine trimming workplace or simulated workplace

workplace instructions

PPE required to fabricate and install canvas products

materials required to fabricate and install canvas products

one vehicle or vessel requiring a canvas product to be fabricated and installed

tools, equipment and materials appropriate for fabricating and installing canvas products.
Prerequisites/co-requisites
Competency Field Vehicle body
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to fabricate canvas products
  • Job requirements are determined from workplace instructions
  • Canvas materials are selected and inspected for quality and quantities are calculated
  • Hazards associated with the work are identified and risks are managed
  • Tools and equipment, including personal protective equipment (PPE), are selected for appropriate fabrication methods and checked for serviceability
  • Work area is prepared and work is planned to minimise waste and use time efficiently
       
Element: Cut, fabricate and install canvas covers and products
  • Materials are measured, marked out and cut according to job requirements and workplace instructions
  • Canvas products are fabricated using canvas sewing techniques and according to job requirements, workplace procedures, andsafety and environmental requirements
  • Canvas products are assembled according to workplace procedures and safety and environmental requirements
  • Installation methods for canvas products are identified and applied according to work instructions
       
Element: Complete work processes
  • Final inspection is made to ensure work meets workplace expectations and component is presented ready for use
  • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • Workplace documentation is processed according to workplace procedures
       
Element: Prepare to fabricate canvas products
  • Job requirements are determined from workplace instructions
  • Canvas materials are selected and inspected for quality and quantities are calculated
  • Hazards associated with the work are identified and risks are managed
  • Tools and equipment, including personal protective equipment (PPE), are selected for appropriate fabrication methods and checked for serviceability
  • Work area is prepared and work is planned to minimise waste and use time efficiently
       
Element: Cut, fabricate and install canvas covers and products
  • Materials are measured, marked out and cut according to job requirements and workplace instructions
  • Canvas products are fabricated using canvas sewing techniques and according to job requirements, workplace procedures, andsafety and environmental requirements
  • Canvas products are assembled according to workplace procedures and safety and environmental requirements
  • Installation methods for canvas products are identified and applied according to work instructions
       
Element: Complete work processes
  • Final inspection is made to ensure work meets workplace expectations and component is presented ready for use
  • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • Workplace documentation is processed according to workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to fabricate canvas products

1.1 Job requirements are determined from workplace instructions

1.2 Canvas materials are selected and inspected for quality and quantities are calculated

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools and equipment, including personal protective equipment (PPE), are selected for appropriate fabrication methods and checked for serviceability

1.5 Work area is prepared and work is planned to minimise waste and use time efficiently

2. Cut, fabricate and install canvas covers and products

2.1 Materials are measured, marked out and cut according to job requirements and workplace instructions

2.2 Canvas products are fabricated using canvas sewing techniques and according to job requirements, workplace procedures, andsafety and environmental requirements

2.3 Canvas products are assembled according to workplace procedures and safety and environmental requirements

2.4 Installation methods for canvas products are identified and applied according to work instructions

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and component is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

fabricate and install one canvas product for an automotive or marine application.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to fabricating and installing canvas products for automotive and marine components, including procedures for:

selecting and using personal protective equipment (PPE)

using specialist tools and equipment

manual handling components

environmental requirements, including procedures for storing and disposing of waste materials

types and operation of trimming and fabrication tools and equipment

designs and styles of different types of canvas products

types, characteristics and applications of:

canvas materials

fasteners

methods and techniques for fabricating and installing canvas products, including:

selecting canvas

planning

measuring

marking out

cutting

sewing

procedures for protecting vehicle and components when installing products

procedures for final inspection of fabricated and installed canvas products.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to fabricate canvas products

1.1 Job requirements are determined from workplace instructions

1.2 Canvas materials are selected and inspected for quality and quantities are calculated

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools and equipment, including personal protective equipment (PPE), are selected for appropriate fabrication methods and checked for serviceability

1.5 Work area is prepared and work is planned to minimise waste and use time efficiently

2. Cut, fabricate and install canvas covers and products

2.1 Materials are measured, marked out and cut according to job requirements and workplace instructions

2.2 Canvas products are fabricated using canvas sewing techniques and according to job requirements, workplace procedures, andsafety and environmental requirements

2.3 Canvas products are assembled according to workplace procedures and safety and environmental requirements

2.4 Installation methods for canvas products are identified and applied according to work instructions

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and component is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Fabrication methods must include:

measuring, marking out and cutting canvas material

machine sewing

reinforcing and edge finishing

assembling and installing.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using PPE

using specialist tools and equipment

manual handling components

environmental requirements, including procedures for storing and disposing of waste materials.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Job requirements are determined from workplace instructions 
Canvas materials are selected and inspected for quality and quantities are calculated 
Hazards associated with the work are identified and risks are managed 
Tools and equipment, including personal protective equipment (PPE), are selected for appropriate fabrication methods and checked for serviceability 
Work area is prepared and work is planned to minimise waste and use time efficiently 
Materials are measured, marked out and cut according to job requirements and workplace instructions 
Canvas products are fabricated using canvas sewing techniques and according to job requirements, workplace procedures, andsafety and environmental requirements 
Canvas products are assembled according to workplace procedures and safety and environmental requirements 
Installation methods for canvas products are identified and applied according to work instructions 
Final inspection is made to ensure work meets workplace expectations and component is presented ready for use 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored 
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures 
Workplace documentation is processed according to workplace procedures 
Job requirements are determined from workplace instructions 
Canvas materials are selected and inspected for quality and quantities are calculated 
Hazards associated with the work are identified and risks are managed 
Tools and equipment, including personal protective equipment (PPE), are selected for appropriate fabrication methods and checked for serviceability 
Work area is prepared and work is planned to minimise waste and use time efficiently 
Materials are measured, marked out and cut according to job requirements and workplace instructions 
Canvas products are fabricated using canvas sewing techniques and according to job requirements, workplace procedures, andsafety and environmental requirements 
Canvas products are assembled according to workplace procedures and safety and environmental requirements 
Installation methods for canvas products are identified and applied according to work instructions 
Final inspection is made to ensure work meets workplace expectations and component is presented ready for use 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored 
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures 
Workplace documentation is processed according to workplace procedures 

Forms

Assessment Cover Sheet

AURVTT015 - Fabricate and install canvas products for automotive and marine components
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AURVTT015 - Fabricate and install canvas products for automotive and marine components

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: