Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AURVTT017 Mapping and Delivery Guide
Fabricate and install automotive and marine floor coverings

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency AURVTT017 - Fabricate and install automotive and marine floor coverings
Description
Employability Skills
Learning Outcomes and Application This unit describes the performance outcomes required to measure, mark out, and cut, and fabricate and install automotive or marine floor coverings. It involves preparing for the task, selecting and using specialist tools and equipment, selecting materials and checking their quality, following manufacturer and customer instructions, and completing workplace processes and documentation.It applies to those working in the automotive and marine trimming service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must satisfy NVR/AQTF assessor requirements.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessment must include direct observation of tasks.

Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the vehicle or vessel floor coverings that they have fabricated and installed, e.g. work order.

Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.

The following resources must be made available:

automotive or marine trimming workplace or simulated workplace

workplace instructions

PPE required to fabricate and install floor coverings

materials required to fabricate and install floor coverings

one vehicle or vessel requiring floor coverings to be installed

tools, equipment and materials appropriate for fabricating and installing floor coverings.
Prerequisites/co-requisites
Competency Field Vehicle Body
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for fabrication of floor coverings
  • Job requirements are determined from workplace instructions
  • Fabrication methods and materials are selected and inspected for quality and quantities are calculated
  • Hazards associated with the work are identified and risks are managed
  • Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • Work is planned to minimise waste and use time efficiently
       
Element: Measure, fabricate and install floor coverings
  • Work area is prepared and fabrication tools and equipment are set up for job requirement
  • Materials are measured, marked out and cut according to floor covering specifications and patterns, workplace procedures, and safety and environmental requirements
  • Floor coverings are fabricated and fabrication process is monitored to ensure specifications, customer requirements, and workplace procedures are met
  • Defects, quality issues and non-conformances are reported to authorised personnel according to workplace procedures
  • Installation and fitting of floor coverings, insulation and fastenings are completed according to workplace procedures and job requirements
       
Element: Complete work processes
  • Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • Workplace documentation is processed according to workplace procedures
       
Element: Prepare for fabrication of floor coverings
  • Job requirements are determined from workplace instructions
  • Fabrication methods and materials are selected and inspected for quality and quantities are calculated
  • Hazards associated with the work are identified and risks are managed
  • Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • Work is planned to minimise waste and use time efficiently
       
Element: Measure, fabricate and install floor coverings
  • Work area is prepared and fabrication tools and equipment are set up for job requirement
  • Materials are measured, marked out and cut according to floor covering specifications and patterns, workplace procedures, and safety and environmental requirements
  • Floor coverings are fabricated and fabrication process is monitored to ensure specifications, customer requirements, and workplace procedures are met
  • Defects, quality issues and non-conformances are reported to authorised personnel according to workplace procedures
  • Installation and fitting of floor coverings, insulation and fastenings are completed according to workplace procedures and job requirements
       
Element: Complete work processes
  • Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • Workplace documentation is processed according to workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare for fabrication of floor coverings

1.1 Job requirements are determined from workplace instructions

1.2 Fabrication methods and materials are selected and inspected for quality and quantities are calculated

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

1.5 Work is planned to minimise waste and use time efficiently

2. Measure, fabricate and install floor coverings

2.1 Work area is prepared and fabrication tools and equipment are set up for job requirement

2.2 Materials are measured, marked out and cut according to floor covering specifications and patterns, workplace procedures, and safety and environmental requirements

2.3 Floor coverings are fabricated and fabrication process is monitored to ensure specifications, customer requirements, and workplace procedures are met

2.4 Defects, quality issues and non-conformances are reported to authorised personnel according to workplace procedures

2.5 Installation and fitting of floor coverings, insulation and fastenings are completed according to workplace procedures and job requirements

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

fabricate and install one complete automotive or marine floor covering to specification.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to fabricating and installing automotive or marine floor coverings, including procedures for:

selecting and using personal protective equipment (PPE)

using specialist tools and equipment

manually handling materials

environmental requirements, including procedures for storing and disposing of waste materials

type, use and basic maintenance of sewing and trimming tools and equipment

types of floor coverings and insulation and their application

methods and techniques for fabricating and installing floor coverings, including:

selecting materials

planning

measuring

marking out

cutting

sewing

using adhesives

fitting and fastening

procedures for protecting vehicle and components when installing floor coverings

procedures for final inspection of fabricated and installed floor coverings.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare for fabrication of floor coverings

1.1 Job requirements are determined from workplace instructions

1.2 Fabrication methods and materials are selected and inspected for quality and quantities are calculated

1.3 Hazards associated with the work are identified and risks are managed

1.4 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

1.5 Work is planned to minimise waste and use time efficiently

2. Measure, fabricate and install floor coverings

2.1 Work area is prepared and fabrication tools and equipment are set up for job requirement

2.2 Materials are measured, marked out and cut according to floor covering specifications and patterns, workplace procedures, and safety and environmental requirements

2.3 Floor coverings are fabricated and fabrication process is monitored to ensure specifications, customer requirements, and workplace procedures are met

2.4 Defects, quality issues and non-conformances are reported to authorised personnel according to workplace procedures

2.5 Installation and fitting of floor coverings, insulation and fastenings are completed according to workplace procedures and job requirements

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Fabrication methods mustinclude:

measuring

marking out

cutting

machine sewing

overlocking

fastening and fitting.

Materials must include:

heel mats

carpet

insulation.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using PPE

using specialist tools and equipment

manually handling materials

environmental requirements, including procedures for storing and disposing of waste materials.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Job requirements are determined from workplace instructions 
Fabrication methods and materials are selected and inspected for quality and quantities are calculated 
Hazards associated with the work are identified and risks are managed 
Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability 
Work is planned to minimise waste and use time efficiently 
Work area is prepared and fabrication tools and equipment are set up for job requirement 
Materials are measured, marked out and cut according to floor covering specifications and patterns, workplace procedures, and safety and environmental requirements 
Floor coverings are fabricated and fabrication process is monitored to ensure specifications, customer requirements, and workplace procedures are met 
Defects, quality issues and non-conformances are reported to authorised personnel according to workplace procedures 
Installation and fitting of floor coverings, insulation and fastenings are completed according to workplace procedures and job requirements 
Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored 
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures 
Workplace documentation is processed according to workplace procedures 
Job requirements are determined from workplace instructions 
Fabrication methods and materials are selected and inspected for quality and quantities are calculated 
Hazards associated with the work are identified and risks are managed 
Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability 
Work is planned to minimise waste and use time efficiently 
Work area is prepared and fabrication tools and equipment are set up for job requirement 
Materials are measured, marked out and cut according to floor covering specifications and patterns, workplace procedures, and safety and environmental requirements 
Floor coverings are fabricated and fabrication process is monitored to ensure specifications, customer requirements, and workplace procedures are met 
Defects, quality issues and non-conformances are reported to authorised personnel according to workplace procedures 
Installation and fitting of floor coverings, insulation and fastenings are completed according to workplace procedures and job requirements 
Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use 
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored 
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures 
Workplace documentation is processed according to workplace procedures 

Forms

Assessment Cover Sheet

AURVTT017 - Fabricate and install automotive and marine floor coverings
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AURVTT017 - Fabricate and install automotive and marine floor coverings

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: