Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AVIO2005A Mapping and Delivery Guide
Conduct screening using Explosive Trace Detection (ETD)

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency AVIO2005A - Conduct screening using Explosive Trace Detection (ETD)
Description This unit involves the skills, knowledge and attitudes required to conduct screening of persons and/or articles using Explosive Trace Detection (ETD) equipment prior to entering an airside security zone or landside security zone. This includes preparing ETD equipment for use, preparing persons or articles for ETD sampling, screening persons or articles using ETD equipment, and responding correctly to positive and negative ETD results. Licensing, legislative, regulatory or certification requirements are applicable to this unit.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application Work must be carried out in accordance with workplace procedures and the relevant regulatory requirements.Work is performed under some supervision usually within a team environment.Work involves the application of established procedures and relevant regulations when conducting screening using Explosive Trace Detection equipment, prior to persons or articles entering an airside security zone or landside security zone.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Not applicable.
Competency Field O – Security
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Set up, check and operate ETD equipment
  • Correct procedures for setting up ETD equipment in an aviation workplace are followed
  • Required ETD equipment checks are carried out and appropriate action is taken in accordance with workplace procedures
  • ETD equipment calibration is performed at set up and during operations in accordance with workplace procedures
  • ETD equipment is operated in accordance with workplace procedures
  • Occupational health and safety (OHS) procedures are followed when setting up and operating the ETD equipment
       
Element: Conduct ETD sampling process
  • Selected persons or articles are screened using an ETD wand, in accordance with legislative requirements and workplace procedures
  • The sample is tested using ETD equipment in accordance with legislative requirements and workplace procedures
       
Element: Respond to results of sample
  • Positive and negative results are recognised in accordance with workplace procedures
  • Action is taken in response to a positive result in accordance with legislative requirements and workplace procedures
       
Element: Record ETD analysis information for evidential purposes
  • Equipment checks and calibration results are recorded and reported in accordance with workplace procedures
  • Calibrations and alarms are saved in accordance with workplace procedures
  • Records of sampling processes, positive and negative results and consequent actions are completed in accordance with workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include:

demonstrate the ability to operate ETD equipment in accordance with workplace procedures and manufacturers’ operating instructions

demonstrate the ability to prepare persons or articles for ETD sampling

using correct techniques, conduct ETD sampling process

demonstrate the ability to take the correct response to a positive or negative ETD result

using the correct documents, accurately record and report information in accordance with workplace procedures

Context of and specific resources for assessment

Performance is demonstrated consistently over a period of time and in a suitable range of contexts

Resources for assessment include:

a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or

access to an appropriate range of relevant operational situations in the workplace

In both real and simulated environments, access is required to:

relevant and appropriate materials and equipment, and

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

Method of assessment

As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests

Practical assessment must occur:

through activities in an appropriately simulated environment at the registered training organisation, and/or

in an appropriate range of situations in the workplace

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

This describes the essential knowledge and skills and their level required for this unit.

Required knowledge:

Sections of the Regulations relevant to the use of ETD equipment for the screening of passengers, bags and articles in an aviation environment including the Notice made under the Aviation Screening Notices

Workplace procedures applicable to the use of ETD equipment for the screening of passengers or articles

Workplace procedures for carrying out checks and calibrations of ETD equipment

Methods, techniques and equipment involved when using ETD equipment for the screening of passengers and/or articles in an aviation environment in accordance with the Regulations, and Notices made under the Regulations

Customer service standards and techniques to be applied when carrying out ETD screening of persons or articles

Typical issues that may occur when using ETD equipment and appropriate action that can be taken to resolve and/or avoid the issue

Reporting requirements for security incidents relevant to ETD Images and/or alarms generated by ETD equipment indicating the possible presence of weapons or explosive substances which might pose a threat to aviation security

Contingency procedures to be taken in the event of a double positive result when carrying out screening using ETD equipment

Site layout, organisational structures and workplace procedures for aviation transport security screening

Roles and responsibilities of law enforcement officers and/or other government officers within the aviation workplace

Contact details for airline and airport staff and relevant law enforcement agencies

Required skills:

Communicate effectively with others when using ETD equipment

Read, understand and apply the Act and the Regulations, Notices made under the Act and the Regulations, and workplace procedures relevant to the use of ETD equipment

Respond to and report security incidents and/or suspected explosive substances detected using ETD equipment

Complete required documentation relevant to the use of ETD equipment

Work collaboratively with others when using ETD equipment

Use appropriate customer service skills when using ETD equipment

Take appropriate action in response to security incidents identified using ETD equipment Modify activities in response to different workplace contingencies, risk situations and environments

Identify, select, use and routinely check ETD equipment, processes and procedures

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.

Legislative requirements may include:

the current Aviation Transport Security legislation and regulations

the organisation’s approved transport security program

Notices made under the Act and the Regulations

other Regulations relating to security screening at an airport

Workplace procedures may relate to:

applicable legislative requirements and aviation screening notices

access and equity policies, principles and practices

client service standards

code of conduct or ethics

communication and reporting procedures

complaint and dispute resolution procedures

emergency and evacuation procedures

employer and employee rights and responsibilities

equipment use and maintenance

OHS policies and procedures

own role, responsibility and authority

privacy and confidentiality

standard operating procedures for screening

ETD screening may be performed at:

a security controlled airport with screened air services

ETD or Explosive Trace Detection means:

a system, or combination of different technologies, that have the ability to detect and indicate by means of an alarm the presence of a target amount of explosive material contained in baggage or on a person or other articles subjected for analysis as described in the Aviation Screening Notice

ETD equipment means:

equipment that can detect and indicate by means of an alarm the presence of a target amount of explosive material as described in the Aviation Screening Notice

Airside security zones on an airport include:

the security restricted area

the enhanced inspection area

Landside security zones on an airport include:

the sterile area

the fuel storage zone

the air traffic control facilities zone

the navigational aids zone

Alarm means:

in relation to ETD equipment – the audible and/or visual alarm produced by the equipment when indicating the presence of a target amount of explosive material within the range of the equipment according to the operating program of the equipment as described in the Aviation Screening Notice

Articles may include:

bags

cabin baggage

checked baggage

goods

hold baggage

packages

personal effects

work equipment

tools of trade

display/promotional items

vehicles/machinery

Trace sampling means:

a process where part of the object in question is wiped and the particles collected in a trap that can be either held in the hand or included as part of a wand as described in the Aviation Screening Notice

A prohibited item is:

as described under the Regulations

A weapon is:

as described under the Regulations

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Correct procedures for setting up ETD equipment in an aviation workplace are followed 
Required ETD equipment checks are carried out and appropriate action is taken in accordance with workplace procedures 
ETD equipment calibration is performed at set up and during operations in accordance with workplace procedures 
ETD equipment is operated in accordance with workplace procedures 
Occupational health and safety (OHS) procedures are followed when setting up and operating the ETD equipment 
Selected persons or articles are screened using an ETD wand, in accordance with legislative requirements and workplace procedures 
The sample is tested using ETD equipment in accordance with legislative requirements and workplace procedures 
Positive and negative results are recognised in accordance with workplace procedures 
Action is taken in response to a positive result in accordance with legislative requirements and workplace procedures 
Equipment checks and calibration results are recorded and reported in accordance with workplace procedures 
Calibrations and alarms are saved in accordance with workplace procedures 
Records of sampling processes, positive and negative results and consequent actions are completed in accordance with workplace procedures 

Forms

Assessment Cover Sheet

AVIO2005A - Conduct screening using Explosive Trace Detection (ETD)
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AVIO2005A - Conduct screening using Explosive Trace Detection (ETD)

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: