Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AVIY3073A Mapping and Delivery Guide
Control remote pilot aircraft (RPA) on the ground

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency AVIY3073A - Control remote pilot aircraft (RPA) on the ground
Description This unit involves the skills and knowledge required to control a remote pilot aircraft (RPA) on the ground including starting and stopping an RPA engine, fulfilling all required safety requirements, and if required, performing pre-taxi functions and manoeuvring the RPA on the ground without incident.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application Work must be carried out in compliance with the relevant licence and RPAS rating requirements of the Civil Aviation Safety Authority (CASA); relevant airspace control requirements; Visual Metrological Conditions (VMC); regulations, safety codes, protocols and procedures relating to controlling an RPA on the ground.Use for Defence Aviation is to be in accordance with relevant Defence Orders and Instructions.Operations are conducted across a variety of operational contexts within the Australian Aviation Industry.Work is performed under limited supervision.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Nil.
Competency Field Y - Aircraft Operation and Traffic Management
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Start engine
  • Pre-start and after-start checks are completed in accordance with Flight Manual/POH
  • RPA is positioned to ensure safety when starting engine
  • Manufacturers limitations and report deviations are complied with as appropriate
  • Engine/s are started in accordance with Flight Manual/POH
  • Emergencies are managed in accordance with Flight Manual/POH and regulatory requirements
       
Element: Taxi/position RPA as appropriate
  • ATIS reports and taxi clearance are obtained where applicable
  • RPA is taxied at a safe speed and in accordance with prevailing location, traffic, surface and weather conditions
  • Instrument checks are performed clear of conflicting traffic and other hazards to confirm serviceability
  • Handling and braking on the ground is in accordance with Flight Manual/POH
  • Airfield markings/lights/signals/indicators, where appropriate, are interpreted and complied with
  • Lookout and right-of-way rules are complied with when applicable
  • Adverse effects on other aircraft, facilities and personnel is avoided
  • Inspection of taxi path is carried out when surface conditions are obscured where applicable
  • RPA (and launch system) is positioned in accordance with launch point requirements and applicable safety precautions
       
Element: Perform RPA Shutdown
  • Pre-and post shutdown checks are completed in accordance with Flight Manual/POH
  • Engine is shut down in accordance with Flight Manual/POH
  • Required documentation is completed in accordance with workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the Elements, Performance Criteria, Required Skills, Required Knowledge and include:

risk management

human factors

safety management systems and:

required knowledge and skills

relevant legislation and workplace procedures

other relevant aspects of the range statement

Context of and specific resources for assessment

Performance is demonstrated consistently over time and in a suitable range of contexts.

Resources for assessment include access to:

a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or

access to an appropriate range of relevant operational situations in the workplace.

In both real and simulated environments, access is required to:

relevant and appropriate materials and equipment, and

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals.

Method of assessment

Practical assessment must occur in a:

real or appropriately simulated environment.

A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate to this unit:

knowledge and performance questions and direct observation.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

This section describes the knowledge and skills required for this unit.

Required knowledge:

Risk identification, analysis and control

Error management, including error types, causes and consequences as relevant to this unit

Human performance and its limitations, including the senses, memory and situational awareness as relevant to this unit

The decision making process as relevant to this unit

Management of fatigue as relevant to this unit

Stress, workload and time pressure management in relation to this unit

Effective communication as relevant to this unit

Relevant sections of Civil Aviation Safety Regulations and Civil Aviation Orders

In Defence context, relevant Defence Orders and Instructions

Relevant WHS/OHS and environmental procedures and regulations

Relevant aircraft/equipment type characteristics

On-ground control procedures as applicable

Relevant sections of the Flight Manual/POH

ATIS Reports

Taxi clearance information

Airfield markings, indicators and lights

Weather information

Required skills:

Control a RPA on the ground in accordance with Flight Manual/POH

Control and manage emergencies

Manoeuvre RPA on the ground without incident

Perform various on-ground functions simultaneously as required

Comply with regulatory requirements and local air traffic control instructions where applicable

Interpret and communicate operational information

Select and use relevant equipment

Use instruments to monitor aircraft performance

Communicate effectively with others when controlling a RPA on the ground

Read and interpret instructions, regulations, procedures and other information relevant to controlling a RPA on the ground

Interpret and follow operational instructions and prioritise work

Complete documentation related to controlling a RPA on the ground

Operate electronic communication equipment to required protocol

Work collaboratively with others when controlling RPA on the ground

Adapt appropriately to cultural differences in the workplace, including modes of behaviour and interactions with others

Promptly report and/or rectify any identified problems that may occur when controlling a RPA on the ground in accordance with regulatory requirements and workplace procedures

Implement contingency plans for unexpected events that may arise when controlling a RPA on the ground

Apply precautions and required action to minimise, control or eliminate hazards that may exist when controlling a RPA on the ground

Monitor and anticipate operational problems and hazards and take appropriate action

Monitor work activities in terms of planned schedule

Modify activities dependent on differing workplace contingencies, situations and environments

Work systematically with required attention to detail without injury to self or others, or damage to goods or equipment

Adapt to differences in equipment and operating environment in accordance with standard operating procedures

Select and use required personal protective equipment conforming to industry and WHS/OHS standards

Implement WHS/OHS procedures and relevant regulations

Identify and correctly use equipment required when controlling a RPA on the ground

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.

Tasks must be undertaken in:

visual line of sight,

visual meteorological conditions (VMC)

Day Visual Flight Rules

Performance may be demonstrated in:

single engine aircraft

multi engine aircraft

variable air traffic conditions

variable weather conditions

variable ground traffic conditions

abnormal situations

Aircraft may include:

remotely piloted aircraft/unmanned aircraft

Crew may include:

remote pilot

observer

Instruments may be:

fitted flight instruments

head up displays

Limitations may be imposed by:

local noise abatement requirements and curfews

Classes of airspace may be:

in Class G airspace as designated by the regulator and may be in:

restricted and danger areas

military control zones

Surfaces may include:

sealed

gravel

grass

Dependent on the type of organisation concerned and the local terminology used, workplace procedures may include:

company procedures

enterprise procedures

organisational procedures

established procedures

standard operating procedures

Information/documents may include:

relevant sections of Civil Aviation Safety Regulations and Civil Aviation Orders pertaining to the control of RPA on the ground including Day Visual Flight Rules (Day VFR)

in Defence context, relevant Defence Orders and Instructions

Flight Manual/Pilot's Operating Handbook (POH)

Manual of Standards - Pilot Licensing (MOS-PL)

operations manuals

approved checklists

workplace procedures and instructions and job specification

induction and training materials

conditions of service, legislation and industrial agreements including workplace agreements and awards

Applicable regulations and legislation may include:

relevant Civil Aviation Safety Regulations and Civil Aviation Orders

in Defence context, relevant Defence Orders and Instructions

relevant state/territory WHS/OHS legislation

relevant state/territory environmental protection legislation

relevant Australian Standards

Performance includes tolerances specified in either of:

relevant licence and aircraft rating requirements of the Civil Aviation Safety Authority (CASA) such as:

Manual of Standards

relevant Defence documentation such as:

Defence Orders and Instructions

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Pre-start and after-start checks are completed in accordance with Flight Manual/POH 
RPA is positioned to ensure safety when starting engine 
Manufacturers limitations and report deviations are complied with as appropriate 
Engine/s are started in accordance with Flight Manual/POH 
Emergencies are managed in accordance with Flight Manual/POH and regulatory requirements 
ATIS reports and taxi clearance are obtained where applicable 
RPA is taxied at a safe speed and in accordance with prevailing location, traffic, surface and weather conditions 
Instrument checks are performed clear of conflicting traffic and other hazards to confirm serviceability 
Handling and braking on the ground is in accordance with Flight Manual/POH 
Airfield markings/lights/signals/indicators, where appropriate, are interpreted and complied with 
Lookout and right-of-way rules are complied with when applicable 
Adverse effects on other aircraft, facilities and personnel is avoided 
Inspection of taxi path is carried out when surface conditions are obscured where applicable 
RPA (and launch system) is positioned in accordance with launch point requirements and applicable safety precautions 
Pre-and post shutdown checks are completed in accordance with Flight Manual/POH 
Engine is shut down in accordance with Flight Manual/POH 
Required documentation is completed in accordance with workplace procedures 

Forms

Assessment Cover Sheet

AVIY3073A - Control remote pilot aircraft (RPA) on the ground
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

AVIY3073A - Control remote pilot aircraft (RPA) on the ground

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: