Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AVIY3078 Mapping and Delivery Guide
Manage remote pilot aircraft systems energy source requirements

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency AVIY3078 - Manage remote pilot aircraft systems energy source requirements
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to manage remote pilot aircraft systems (RPAS) energy source requirements, in compliance with relevant regulatory requirements of the Civil Aviation Safety Authority and national operating standards.It includes planning energy source requirements, managing energy source system, and refuelling and recharging the RPAS.This unit addresses aviation technical skill requirements (physical, mental and task-management abilities) related to aircraft operational duties of flight crew and ground personnel, and contributes to safe and effective performance in complex aviation operational environments.Operations are conducted as part of recreational, commercial and military aircraft activities across a variety of operational contexts within the Australian aviation industry.Work is performed independently or under limited supervision within a single-pilot or multi-crew RPAS environment.Licensing, legislative, regulatory or certification requirements are applicable to this unit.Use for Defence Aviation is to be in accordance with relevant Defence Orders, Instructions, Publications and Regulations.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Assessment must occur in workplace operational situations. Where this is not appropriate, assessment must occur in simulated workplace operational situations that reflect workplace conditions.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or simulations

acceptable means of simulation assessment

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

relevant materials, tools, equipment and personal protective equipment currently used in industry.

Prerequisites/co-requisites
Competency Field Y – Aircraft Operation and Traffic Management
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan energy source requirements
  • Total en route and reserve energy source requirements are calculated and determined in accordance with RPAS type specific requirements
  • Adjusted allowances are made for possible abnormal or emergency situations
  • Energy source calculations are documented in accordance with workplace procedures
       
Element: Manage energy source system
  • Energy source contents and quality are inspected and confirmed before launch
  • RPAS is configured to achieve desired profile, range or endurance status
  • Potential hazards are anticipated and relevant controls are implemented
  • Energy source system is operated in accordance with aircraft flight manual (AFM)/pilot’s operating handbook (POH)
  • Energy source status is monitored throughout flight and is modified appropriately as circumstances change
  • Work health and safety (WHS)/occupational health and safety (OHS) procedures are followed at all times when carrying out energy source management procedures
       
Element: Refuel/recharge RPAS
  • Appropriate precautions are undertaken to ensure the safety of personnel and property during refuelling/recharging operations
  • RPAS is correctly refueled/recharged in accordance with AFM/POH, WHS/OHS requirements, regulatory requirements and workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Plan energy source requirements

1.1

Total en route and reserve energy source requirements are calculated and determined in accordance with RPAS type specific requirements

1.2

Adjusted allowances are made for possible abnormal or emergency situations

1.3

Energy source calculations are documented in accordance with workplace procedures

2

Manage energy source system

2.1

Energy source contents and quality are inspected and confirmed before launch

2.2

RPAS is configured to achieve desired profile, range or endurance status

2.3

Potential hazards are anticipated and relevant controls are implemented

2.4

Energy source system is operated in accordance with aircraft flight manual (AFM)/pilot’s operating handbook (POH)

2.5

Energy source status is monitored throughout flight and is modified appropriately as circumstances change

2.6

Work health and safety (WHS)/occupational health and safety (OHS) procedures are followed at all times when carrying out energy source management procedures

3

Refuel/recharge RPAS

3.1

Appropriate precautions are undertaken to ensure the safety of personnel and property during refuelling/recharging operations

3.2

RPAS is correctly refueled/recharged in accordance with AFM/POH, WHS/OHS requirements, regulatory requirements and workplace procedures

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least one occasion and include:

adapting to differences in equipment and operating environment in accordance with standard operating procedures

applying precautions and required action to minimise, control or eliminate identified hazards

applying relevant legislation and workplace procedures

applying relevant safety practices and regulations

calculating energy source allowances, consumption and endurance

communicating effectively with others

completing relevant documentation

identifying and correctly using relevant equipment

identifying applicable grade of fuel/fuel cell/battery for remote pilot aircraft system (RPAS) type

implementing contingency plans

implementing safety precautions during RPA refuelling/recharging

implementing work health and safety (WHS)/occupational health and safety (OHS) procedures and relevant regulations

interpreting and following operational instructions and prioritising work

maintaining compliance with regulatory requirements

maintaining relevant workplace records

managing operation of RPAS energy source systems

modifying activities depending on workplace contingencies, situations and environments

monitoring and anticipating operational problems and hazards and taking appropriate action

monitoring energy source usage to achieve desired profile, range or endurance following configuration changes

monitoring work activities in terms of planned schedule

operating electronic communications equipment to required protocol

performing energy source quality control checks

planning RPAS energy source requirements

reading, interpreting and following relevant regulations, instructions, procedures, information and signs

recognising deteriorating situations impacting on energy source requirements

reporting and/or rectifying identified problems promptly, in accordance with regulatory requirements and workplace procedures

selecting and using required personal protective equipment conforming to industry and WHS/OHS standards

working collaboratively with others

working systematically with required attention to detail without injury to self or others, or damage to goods or equipment.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

aerodynamic, engine and airframe requirements for RPAS to achieve best range and endurance

aeronautical decision-making processes

calculation of conversion between imperial and metric measures

dangers of using the incorrect grade of fuel/fuel cell/battery

effective communication

energy source consumption of RPAS at varying propulsion and systems power settings

energy source principles relating to RPAS

energy source reserve requirement for RPAS

energy source transfer equipment appropriate for the type of RPA and energy source being used

error management, including error types, causes and consequences

factors affecting energy source consumption

hazards that exist when refuelling/recharging RPAS and related hazard control procedures and precautions

in a Defence context, relevant Defence Orders and Instructions

methods of identifying applicable grade of fuel/ fuel cell/battery for RPAS type

mixture leaning or power conservation techniques

operation of the specific RPAS energy source system

principles of RPAS energy source systems

problems that may occur when managing RPAS energy source and appropriate action that should be taken in each case

regulations and procedures for refuelling/recharging RPAS

relevant sections of Civil Aviation Safety Regulations and Civil Aviation Orders

relevant WHS/OHS and environmental procedures and regulations

stress, workload and time pressure management.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Plan energy source requirements

1.1

Total en route and reserve energy source requirements are calculated and determined in accordance with RPAS type specific requirements

1.2

Adjusted allowances are made for possible abnormal or emergency situations

1.3

Energy source calculations are documented in accordance with workplace procedures

2

Manage energy source system

2.1

Energy source contents and quality are inspected and confirmed before launch

2.2

RPAS is configured to achieve desired profile, range or endurance status

2.3

Potential hazards are anticipated and relevant controls are implemented

2.4

Energy source system is operated in accordance with aircraft flight manual (AFM)/pilot’s operating handbook (POH)

2.5

Energy source status is monitored throughout flight and is modified appropriately as circumstances change

2.6

Work health and safety (WHS)/occupational health and safety (OHS) procedures are followed at all times when carrying out energy source management procedures

3

Refuel/recharge RPAS

3.1

Appropriate precautions are undertaken to ensure the safety of personnel and property during refuelling/recharging operations

3.2

RPAS is correctly refueled/recharged in accordance with AFM/POH, WHS/OHS requirements, regulatory requirements and workplace procedures

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Energy source must include one or more of the following:

battery charger

gas

liquid fuel

other power producing source

other renewable energy

power producing sources that power the on-board systems and thrust producing components of the specific RPAS

solar

Energy source allowances must be made for one or more of the following:

en route and destination meteorological forecasts

fixed energy source reserves

holding requirements

operational tasking requirements

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Total en route and reserve energy source requirements are calculated and determined in accordance with RPAS type specific requirements 
Adjusted allowances are made for possible abnormal or emergency situations 
Energy source calculations are documented in accordance with workplace procedures 
Energy source contents and quality are inspected and confirmed before launch 
RPAS is configured to achieve desired profile, range or endurance status 
Potential hazards are anticipated and relevant controls are implemented 
Energy source system is operated in accordance with aircraft flight manual (AFM)/pilot’s operating handbook (POH) 
Energy source status is monitored throughout flight and is modified appropriately as circumstances change 
Work health and safety (WHS)/occupational health and safety (OHS) procedures are followed at all times when carrying out energy source management procedures 
Appropriate precautions are undertaken to ensure the safety of personnel and property during refuelling/recharging operations 
RPAS is correctly refueled/recharged in accordance with AFM/POH, WHS/OHS requirements, regulatory requirements and workplace procedures 

Forms

Assessment Cover Sheet

AVIY3078 - Manage remote pilot aircraft systems energy source requirements
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

AVIY3078 - Manage remote pilot aircraft systems energy source requirements

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: