Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

CPCCPD3023A Mapping and Delivery Guide
Apply texture coat paint finishes by brush, roller and spray

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency CPCCPD3023A - Apply texture coat paint finishes by brush, roller and spray
Description This unit of competency specifies the outcomes required to apply texture coat paint finishes to different surfaces by using brush, roller and spray.The unit includes planning and preparation for the work, preparation of the work area and materials, application of the texture coat paint and completion of clean-up activities.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application This unit of competency supports the attainment of the understanding and skills to apply texture coat paint finishes by brush, roller and spray, which may include working with others and as a member of a team.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element:
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

This unit of competency could be assessed in the workplace or a close simulation of the workplace environment, provided that simulated or project-based assessment techniques fully replicate construction workplace conditions, materials, activities, responsibilities and procedures.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

A person who demonstrates competency in this unit must be able to provide evidence of the ability to:

locate, interpret and apply relevant information, standards and specifications

comply with site safety plan and OHS legislation, regulations and codes of practice applicable to workplace operations

comply with organisational policies and procedures including quality requirements

safely and effectively operate and use tools, plant and equipment

communicate and work effectively and safely with others

prepare and apply to specification texture coat paints using brush and roller and either spray or one other applicator system, to a minimum of:

one complete wall a minimum of 5 square metre with 2 hard edges

one complete wall, ceiling to floor including an internal corner (e.g. wall junction and ceiling/wall junction)

one complete window reveal

dispose of all paint types in an environmentally sustainable way compliant with relevant local legislation and regulations

clean and store painting equipment using environmentally sustainable methods and work practices including waste reticulation systems.

Context of and specific resources for assessment

This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints.

Assessment of essential underpinning knowledge will usually be conducted in an off-site context.

Assessment is to comply with relevant regulatory or Australian standards' requirements.

Resource implications for assessment include:

an induction procedure and requirement

realistic tasks or simulated tasks covering the mandatory task requirements

relevant specifications and work instructions

tools and equipment appropriate to applying safe work practices

support materials appropriate to activity

workplace instructions relating to safe work practices and addressing hazards and emergencies

material safety data sheets

research resources, including industry related systems information.

Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support.

Method of assessment

Assessment methods must:

satisfy the endorsed Assessment Guidelines of the Construction, Plumbing and Services Training Package

include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application

reinforce the integration of employability skills with workplace tasks and job roles

confirm that competency is verified and able to be transferred to other circumstances and environments.

Validity and sufficiency of evidence requires that:

competency will need to be demonstrated over a period of time reflecting the scope of the role and the practical requirements of the workplace

where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice, with a decision on competency only taken at the point when the assessor has complete confidence in the person's demonstrated ability and applied knowledge

all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence.

Assessment processes and techniques should as far as is practical take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed.

Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

Required skills for this unit are:

communication skills to:

determine requirements

enable clear and direct communication, using questioning to identify and confirm requirements, share information, listen and understand

follow instructions

read and interpret:

documentation from a variety of sources

drawings and specifications

report faults

use language and concepts appropriate to cultural differences

use and interpret non-verbal communication, such as hand signals

evaluating own actions and making judgments about performance and necessary improvements

identifying and accurately reporting to appropriate personnel any faults in tools, equipment or materials

organisational skills, including the ability to plan and set out work

recognising procedures, following instructions, responding to change and contributing to workplace responsibilities, such as current work site environmental and sustainability frameworks or management systems

teamwork skills to coordinate own work with others to action tasks and relate to people from a range of cultural and ethnic backgrounds and with varying physical and mental abilities

technological skills to:

use a range of mobile technology, such as two-way radio and mobile phones

voice and hand signals to access and understand site-specific instructions.

Required knowledge

Required knowledge for this unit is:

applicator system types, characteristics, uses and limitations

job safety analysis (JSA) and safe work method statements

material safety data sheets (MSDS)

materials storage and environmentally sustainable waste management, including correct disposal of water-based, latex-based and solvent-based paints

painting and decorating terminology

plans, drawings and specifications

processes for the calculation of material requirements

quality requirements

Australian Paint Approval Scheme (APAS) classifications

types of paints, including the characteristics and uses of paint materials with various volatile organic compound (VOCs) levels and alternative and natural paints

solid waste and paint sludge disposal techniques and relevant legislation, including Environmental Protection Authority (EPA) and local Council regulations

surface preparation techniques related to texture coatings

texture coat paint systems technology

texture coatings and their properties, uses and limitations

workplace and equipment safety requirements.

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Information includes:

diagrams or sketches

instructions issued by authorised organisational or external personnel

manufacturer specifications and instructions, where specified

MSDS

memos

regulatory and legislative requirements pertaining to the application of texture coat paint

relevant Australian standards

safe work procedures relating to the application of texture coat paint

signage

verbal, written and graphical instructions

work bulletins

work schedules, plans and specifications.

Planning and preparation include:

assessment of conditions and hazards

determination of work requirements and safety plans and policies

equipment defect identification

work site inspection.

Safety (OHS) is to be in accordance with state and territory legislation and regulations and project safety plan and may include:

emergency procedures, including extinguishing fires, organisational first aid requirements and evacuation

handling activities that may require the assistance of others or the use of manual or mechanical lifting devices where size, weight or other issues, such as a disability are a factor

hazard control

hazardous materials and substances

organisational first aid

PPE prescribed under legislation, regulations and workplace policies and practices

safe operating procedures, including the conduct of operational risk assessment and treatments associated with:

earth leakage boxes

electrical and fire and/or explosion from combustible materials

falling objects

lighting

manual handling

power cables, including overhead service trays, cables and conduits

restricted access barriers

solvents, lead, chemicals, fumes/gases

surrounding structures

traffic control

trip hazards

work access platforms

work site visitors and the public

working at heights

working in confined spaces

working in proximity to others, work site visitors and the public

use of firefighting equipment

use of tools and equipment

workplace environmental requirements and safety.

Tools and equipment:

include:

brooms

brushes

mixers

roller equipment

sprays

vacuum cleaners

may include:

compressors

hopper guns

hoses and fittings

mobile scaffold

stepladders

trestles and planks.

Quality requirements include:

internal company quality policy and standards

manufacturer specifications, where specified

relevant regulations, including Australian standards

workplace operations and procedures.

Environmental requirements include:

clean-up management

dust and noise

sedimentation control

low odour and emissions

vibration

waste management.

Application processes:

is to conform with AS2311 The Painting of Buildings.

of texture coat paint:

is to be by:

brush

roller

may be by:

spray

other application system.

Texture coat paint finishes:

include high-build (acrylic or styrene/acrylic) coatings

may include proprietary products or lines.

Surface for application of textured paint finishes includes:

brick and masonry

fibrous cement sheeting

off-form concrete

paper-faced plasterboard

tilt-up concrete slabs.

Paint waste, water and solvents disposal includes:

use of manual and machine environmentally sustainable cleaning methods

cleaning water re-cycling or professional disposal

solid waste disposal requirements

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback

Forms

Assessment Cover Sheet

CPCCPD3023A - Apply texture coat paint finishes by brush, roller and spray
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

CPCCPD3023A - Apply texture coat paint finishes by brush, roller and spray

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: