Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

CPCCST3017A Mapping and Delivery Guide
Construct stone arches

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency CPCCST3017A - Construct stone arches
Description This unit of competency specifies the outcomes required to build stonemasonry arches of different types, using regular and irregular stone, and according to detailed job drawings and specifications.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application This unit of competency supports the work of stonemasons who build internal or external stonemasonry arches, working individually or in a team.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare for work.
  • Work instructions are obtained from relevant information, confirmed and applied to planning and preparation.
  • Work health and safety (WHS) requirements are followed according to safety plans and policies.
  • Signage and barricade requirements are identified and implemented.
  • Plant, tools and equipment selected to carry out tasks are consistent with job requirements, checked for serviceability, and faults are rectified and reported before work begins.
  • Material quantity requirements are identified and calculated according to plans, specifications and quality requirements.
  • Materials appropriate to the work application are obtained, prepared, safely handled and located ready for use.
  • Environmental requirements are identified for the project according to environmental plans and statutory and regulatory authority obligations.
  • Scaffolding is erected according to job and WHS requirements.
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

This unit of competency could be assessed in the workplace or simulated workplace setting. Assessment shall be while tasks are undertaken either individually or as part of a team under limited supervision.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

A person should demonstrate the ability to build two different types of stone arches and provide evidence of:

complying with work health and safety requirements applicable to workplace operations

complying with organisational policies and procedures

selecting and using tools and equipment to carry out arch construction process

applying organisational quality procedures and processes within the context of constructing stone arches to walls or columns

adopting and using safe and effective procedures to set out and set up arch centre to specification

giving particular attention to support of centre and method of lowering when arch is complete

identifying and, where applicable, marking each cut stone for arch location

using safe and effective procedures to handle and place each stone

forming arch to specification and, where applicable, applying mortar to joints

identifying typical faults and problems that occur and taking necessary action to rectify them

communicating with others to ensure safe and effective workplace operations

completing arch construction, including finish to specifications.

Context of and specific resources for assessment

Assessment of this unit:

must be in the context of the work environment

may be conducted in an off-site context, provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills

must meet relevant compliance requirements.

Resource implications for assessment may include:

drawings and specifications relevant to proposed activity

hand and power tools, plant and equipment appropriate to construction processes

materials relevant to proposed activity

scaffolding appropriate to construction processes

site location for proposed activity.

Method of assessment

Assessment for this unit must verify the practical application of the required skills and knowledge, using one or more of the following methods:

direct observation of tasks in real or simulated work conditions

questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application

review of relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff.

Guidance information for assessment

This unit could be assessed on its own or in combination with other units relevant to the job function.

Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support.

Assessment processes and techniques should, as far as is practical, take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

communication skills to:

enable clear and direct communication

use questioning to identify and confirm requirements

share information

follow instructions

use and interpret non-verbal communication

use language and concepts appropriate to cultural differences

innovation skills to select appropriate tools and equipment, respond to workplace challenges and put ideas into action

numeracy skills to apply measurements and calculate material requirements and mortar mixture

planning and organising skills to identify requirements, apply relevant resources and sequence tasks

problem-solving skills to recognise and take action to rectify minor faults and problems

reading skills to read and interpret drawings and specifications

self-management skills to work safely, including safely handling materials

teamwork skills to work with others to action tasks

technical skills to:

erect scaffolding

identify and select materials specific to requirements

select and use appropriate plant, equipment, hand and power tools

Required knowledge

arch design and construction principles

Australian standards as they relate to the construction of stonemasonry arches, including:

AS1316 Masonry cement

AS2699 Wall ties for masonry construction

AS3700 Masonry structures

methods for constructing stonemasonry arches

mortar mix composition for different types of stone

National Construction Code as it applies to the construction of stonemasonry arches

procedures for measuring, levelling and calculating

procedures for the safe use of scaffolding

range and application of mortar additives

safe operation of tools, plant and equipment relating to arch construction

types and characteristics of stone

types and safe operation of relevant lifting equipment

workplace and equipment safety requirements, including relevant statutory regulations, codes and standards

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Information may include:

diagrams or sketches

instructions issued by authorised organisational or external personnel

memos

regulatory and legislative requirements

current Australian standards relating to the construction of stone arches

plans and specifications

quality requirements

safe work procedures

safety data sheets (SDS)

signage

verbal, written and graphical instructions, including manufacturer specifications and instructions where specified

work bulletins

work schedules, plans and specifications.

Planningandpreparation may include:

assessing conditions and hazards

determining work requirements and safety plans and policies

identifying equipment defects

inspecting work sites.

Work health and safetyrequirements must comply with state and territory legislation and regulations and project safety plan and may include:

emergency procedures, including extinguishing fires, organisational first aid requirements, and evacuation procedures

hazard control

hazardous materials and substances

personal protective equipment (PPE) prescribed under legislation, regulations and workplace policies and practices

safe operating procedures, including operational risk assessment and treatments associated with:

concealed services (water, power and gas)

lighting

restricted access barriers

traffic control

working at heights

work site visitors and the public

working in proximity to others

use of firefighting equipment

use of tools and equipment

workplace environmental requirements and safety.

Toolsandequipment may include:

chisels

concrete mixers

gin poles

hammers

hand saws

masonry saws

measuring tapes and rules

mortar boards

power leads

power saws

shear legs

shovels

spirit levels

squares

straight edges

string lines

trowels.

Qualityrequirements may include:

attention to specifications of work

control of handling procedures

finishing of stone surfaces

quality of materials

relevant regulations, including:

Australian standards

internal organisational quality policy and standards

manufacturer specifications where specified

workplace operations and procedures.

Materials for arches:

may include:

granite

limestone

marble

sandstone

may be:

ashlar

pre-cut stones

regular

random regular

coursed

uncoursed.

Environmentalrequirements may include:

clean-up management

dust and noise control

vibration management

waste management.

Statutoryandregulatoryauthority includes:

federal, state and local authorities administering applicable Acts, regulations and codes of practice.

Arches may be designed for walls of:

regular gauge

random regular

random rubble.

Joints in stone arches may be:

cement mortar

dry.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work instructions are obtained from relevant information, confirmed and applied to planning and preparation. 
Work health and safety (WHS) requirements are followed according to safety plans and policies. 
Signage and barricade requirements are identified and implemented. 
Plant, tools and equipment selected to carry out tasks are consistent with job requirements, checked for serviceability, and faults are rectified and reported before work begins. 
Material quantity requirements are identified and calculated according to plans, specifications and quality requirements. 
Materials appropriate to the work application are obtained, prepared, safely handled and located ready for use. 
Environmental requirements are identified for the project according to environmental plans and statutory and regulatory authority obligations. 
Scaffolding is erected according to job and WHS requirements. 

Forms

Assessment Cover Sheet

CPCCST3017A - Construct stone arches
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

CPCCST3017A - Construct stone arches

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: