Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

CPCPCM4003A Mapping and Delivery Guide
Produce 2-D architectural drawings using CAD software

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency CPCPCM4003A - Produce 2-D architectural drawings using CAD software
Description This unit of competency specifies the outcomes required to produce two-dimensional (2-D) architectural drawings using computer-aided design (CAD) software under limited supervision.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application This unit of competency supports the needs of project managers, site managers, estimators, forepersons and other plumbing and services and building and construction industry personnel who have a responsibility for preparing architectural drawings from project briefs, sketches, drawings and plans for residential and commercial construction projects. The drawings produced and notations included should conform to Australian standards and drawing protocols.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Nil Nil
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Create a drawing template file.
  • Basic drawing environment is set up.
  • Suitable layering strategy is created.
  • Suitable architectural library is created.
  • Suitable text and dimension styles are created.
       
Element: Produce architectural drawings to relevant Australian standards.
  • Drawing requirements are clarified and confirmed.
  • Drawings are produced using appropriate layers.
  • Notation that complies with Australian standards and drawing protocols is added to the drawings as required.
  • Dimensions, using appropriate scales in accordance with Australian standards and drawing protocols, are added to the drawings as required.
       
Element: Edit drawing components.
  • Elements that are not required are deleted from an existing drawing.
  • Editing commands are used to modify drawing elements and existing text.
       
Element: Plot CAD drawings.
  • Page layout for the drawing file is set to suit plotting requirements.
  • Print parameters for the plotter are set.
  • Drawings are plotted on the correct media.
       
Element: Save and back up files.
  • Suitable file directories are created for the drawing project.
  • Drawing files are saved and backed up correctly to specified drives or directories.
  • Saved files are retrieved, renamed and edited as required.
       
Element: Import files.
  • Drawing files are inserted correctly into other software applications.
  • Text files are imported into CAD drawings from other software applications.
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

This unit of competency could be assessed in the workplace or a close simulation of the workplace environment providing that simulated or project-based assessment techniques fully replicate plumbing and services workplace conditions, materials, activities, responsibilities and procedures.

It may be assessed on its own or as part of an integrated assessment activity involving preparation of CAD drawings, including construction detailing and material identification, for a range of typical Building Code of Australia (BCA) Type C structures (reference: Table C1.1 BCA).

Critical aspects for assessment and evidence required to demonstrate competency in this unit

A person who demonstrates competency in this unit must be able to provide evidence of:

correctly identifying dimensions, symbols, abbreviations and key features of architectural drawings

correctly identifying styles, characteristics, technologies and decorative styles

correctly identifying particular styles of architecture, including period and type of materials used

sound understanding of the structural function of elements

correctly identifying the relationship between architectural styles and structures

applying CAD software.

Context of and specific resources for assessment

This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints.

Assessment of essential underpinning knowledge will usually be conducted in an off-site context.

Assessment is to comply with relevant regulatory or Australian standards' requirements.

Resource implications for assessment include:

an induction procedure and requirement

realistic tasks or simulated tasks covering the minimum task requirements

relevant specifications and work instructions

tools and equipment appropriate to applying safe work practices

support materials appropriate to activity

workplace instructions relating to safe working practices and addressing hazards and emergencies

material safety data sheets

research resources, including industry related systems information.

Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support.

Method of assessment

Assessment methods must:

satisfy the endorsed Assessment Guidelines of the Construction, Plumbing and Services Training Package

include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application

reinforce the integration of employability skills with workplace tasks and job roles

confirm that competency is verified and able to be transferred to other circumstances and environments.

Validity and sufficiency of evidence requires that:

competency will need to be demonstrated over a period of time reflecting the scope of the role and the practical requirements of the workplace

where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice, with a decision on competency only taken at the point when the assessor has complete confidence in the person's demonstrated ability and applied knowledge

all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence.

Assessment processes and techniques should as far as is practical take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed.

Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

Required skills for this unit are:

communication skills to:

complete workplace documentation

enable clear and direct communication, using questioning to identify and confirm requirements, share information, listen and understand

prepare written quotes and tenders

record details, including costs and charges

read and interpret:

plans, drawings, specifications and design briefs

documentation from a variety of sources

seek clarification

use language and concepts appropriate to cultural differences

use and interpret non-verbal communication

creative design, drawing and drafting skills, including use of drafting equipment and CAD

numeracy skills to apply measurements and make calculations

planning and organisational skills to ensure coordinated development of sketches and drawings.

Required knowledge

Required knowledge for this unit is:

building materials and techniques

building services

construction technology

document controls

drafting and drawing protocols

relevant industry standards and codes of practice

general OHS principles and responsibilities

requirements for the production of working drawings

structural systems

types and uses of working drawings.

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Drawing requirements include:

details, including:

area analysis

construction notes

general notes

location of neighbouring buildings

services

types of drawing, including:

elevations or projections

floor plans

sections

site plans.

Drawing protocols include:

abbreviations

commonly used symbols

legends

lettering standards

numbering

paper size

scale

standard units of measurement.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Basic drawing environment is set up. 
Suitable layering strategy is created. 
Suitable architectural library is created. 
Suitable text and dimension styles are created. 
Drawing requirements are clarified and confirmed. 
Drawings are produced using appropriate layers. 
Notation that complies with Australian standards and drawing protocols is added to the drawings as required. 
Dimensions, using appropriate scales in accordance with Australian standards and drawing protocols, are added to the drawings as required. 
Elements that are not required are deleted from an existing drawing. 
Editing commands are used to modify drawing elements and existing text. 
Page layout for the drawing file is set to suit plotting requirements. 
Print parameters for the plotter are set. 
Drawings are plotted on the correct media. 
Suitable file directories are created for the drawing project. 
Drawing files are saved and backed up correctly to specified drives or directories. 
Saved files are retrieved, renamed and edited as required. 
Drawing files are inserted correctly into other software applications. 
Text files are imported into CAD drawings from other software applications. 

Forms

Assessment Cover Sheet

CPCPCM4003A - Produce 2-D architectural drawings using CAD software
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

CPCPCM4003A - Produce 2-D architectural drawings using CAD software

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: