Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

CPCPGS3020A Mapping and Delivery Guide
Install Type B gas appliance flues

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency CPCPGS3020A - Install Type B gas appliance flues
Description This unit of competency specifies the outcomes required to install flue systems for Type B gas appliances.Work may also involve the installation of power flue applications.The design requirements of this unit are limited to the application of the design to layout and installation.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application Site location for work application may be a customer's premises.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites CPCPCM2023A Carry out OHS requirements Nil
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for work.
  • Work plans, specifications and any special instructions are obtained.
  • Safety (OHS) requirements associated with installing flues for Type B gas appliances, and workplace environmental requirements, are adhered to throughout the work.
  • Quality assurance requirements for company operations are identified and adhered to.
  • Approval of system design is obtained in accordance with statutory and regulatory authority and workplace requirements.
  • Tasks are planned in conjunction with others involved in or affected by the work.
  • Sequence of work is prioritised to suit job requirements.
  • Tools and equipment are selected consistent with installing a Type B appliance flue and checked for serviceability.
       
Element: Identify flue requirements.
  • Details of dimensions and loads are checked for compliance with plans and specifications.
  • Size of flue is calculated in accordance with authority requirements and is appropriate for type of appliance burner.
  • Flue is selected for type of appliance and its determined route, in compliance with relevant Australian standards.
  • Quantity and type of materials for the installation are calculated from plans and specifications.
       
Element: Install flue.
  • Preparatory work, including any penetration of walls and rooves, is performed in accordance with industry and workplace requirements.
  • Installation is completed without damage or distortion to surrounding environment or other services.
  • Flue is installed in compliance with relevant Australian standards and authority requirements.
  • Sustainability principles and concepts are applied throughout the installation.
       
Element: Clean up.
  • Work area is cleared and materials disposed of, reused or recycled according to legislation, regulations, codes of practice and job specification.
  • Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and workplace procedures.
  • Information is accessed and documentation completed in accordance with workplace requirements.
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

This unit of competency could be assessed in the workplace or a close simulation of the workplace environment providing that simulated or project-based assessment techniques fully replicate plumbing and services workplace conditions, materials, activities, responsibilities and procedures.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

A person who demonstrates competency in this unit must be able to provide evidence of:

locating, interpreting and applying relevant information, Australian standards and specifications for the installation of Type B appliance flues

applying safety requirements throughout the work sequence, including the electrical requirements and use of personal protective clothing and equipment

as a minimum the ability to, given the plans, specifications and regulatory authority approval, install a mild steel flue from a boiler flue spigot to terminate above the roofline, ensuring:

application of sustainability principles and concepts throughout the installation

correct identification of location, design and details of proposed installation

correct selection and use of appropriate processes, tools and equipment

completion of all work to specification

compliance with regulations, relevant Australian standards and organisational quality procedures and processes

communicating and working effectively and safely with others.

Context of and specific resources for assessment

This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints.

Assessment of essential underpinning knowledge will usually be conducted in an off-site context.

Assessment is to comply with relevant regulatory or Australian standards' requirements.

Resource implications for assessment include:

an induction procedure and requirement

realistic tasks or simulated tasks covering the minimum task requirements

relevant specifications and work instructions

tools and equipment appropriate to applying safe work practices

support materials appropriate to activity

workplace instructions relating to safe working practices and addressing hazards and emergencies

material safety data sheets

research resources, including industry related systems information.

Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support.

Method of assessment

Assessment methods must:

satisfy the endorsed Assessment Guidelines of the Construction, Plumbing and Services Training Package

include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application

reinforce the integration of employability skills with workplace tasks and job roles

confirm that competency is verified and able to be transferred to other circumstances and environments.

Validity and sufficiency of evidence requires that:

competency will need to be demonstrated over a period of time reflecting the scope of the role and the practical requirements of the workplace

where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice, with a decision on competency only taken at the point when the assessor has complete confidence in the person's demonstrated ability and applied knowledge

all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence.

Assessment processes and techniques should as far as is practical take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed.

Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

Required skills for this unit are:

communication skills to:

access information

complete workplace documentation

determine requirements

enable clear and direct communication, using questioning to identify and confirm requirements, share information, listen and understand

follow instructions

inform relevant authorities and supervisors of completion of job

plan work with others

read and interpret:

documentation from a variety of sources

drawings and specifications

record data in writing

use language and concepts appropriate to cultural differences

use and interpret non-verbal communication, such as hand signals

identifying and accurately reporting to appropriate personnel any faults in tools, equipment or materials

installing flues for Type B gas appliances

numeracy skills to apply measurements and calculations

organisational skills, including the ability to plan and set out work

teamwork skills to work with others to action tasks and relate to people from a range of cultural and ethnic backgrounds and with varying physical and mental abilities

technological skills to:

access and understand site-specific instructions in a variety of media

use mobile communication technology.

Required knowledge

Required knowledge for this unit is:

electrical safety and requisite precautions

how to access relevant information, including codes and technical standards

job safety analysis (JSA) and safe work method statements (SWMS)

material requirements determination process

procedures for installing Type B appliances, including roof and wall penetration and flashing

properties of gas, gas safety, combustion principles, pressure and flow rates

relevant statutory and authority requirements related to installing flues for Type B appliances

SI system of measurements

workplace and equipment safety requirements.

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Safety (OHS) is to be in accordance with commonwealth, state and territory legislation and regulations and may include:

handling of materials

hazard control

personal protective clothing and equipment prescribed under legislation, regulations and workplace policies and practices

safe operating procedures, including recognising and preventing hazards associated with:

electricity

hazardous materials and substances

service lines

surrounding structures and facilities

trip hazards

use of tools and equipment

work site visitors and the public

working at heights

working in proximity to others

use of firefighting equipment

use of first aid equipment

workplace environment and safety.

Environmental requirements may include:

clean-up protection

waste management.

Quality assurance requirements may include:

Australian standards

Environment Protection Authority (EPA)

environment policy

internal company quality assurance policy and risk management strategy

International Standards Organisation

site safety plan

workplace operations and procedures.

Statutory and regulatory authorities include:

commonwealth, state and local authorities administering applicable Acts, regulations and codes of practice.

Tools and equipment may include:

chain blocks

forklifts

grinders and ladders

hacksaws

hand and power tools

hand trolleys

hoists

jacks

lifting and load shifting equipment

manual metal arc welding equipment

measuring equipment

metal inert gas (MIG) and tungsten inert gas (TIG) welding equipment

oxy welding cutting equipment

restricted height scaffolding and elevated work platform

rollers

tin snips.

Type B appliances:

are complex gas installations of greater than 10 megajoules (MJ) rating for which there is no approval scheme

flue materials and installation of Type B appliance flues are to conform to relevant Australian standards.

Type B flue materials:

may include:

fibre cement

mild steel

stainless steel

other approved materials

are to comply with the relevant Australian standards for Type B gas appliance flues.

Sustainability principles and concepts:

cover the current and future social, economic and environmental use of resources

may include:

selecting appropriate components and material

efficient energy use

efficient use and recycling of material

correct handling of hazardous materials

disposal of waste material to ensure minimal environmental impact.

Information may include:

charts and hand drawings

diagrams or sketches

instructions issued by authorised organisational or external personnel

job drawings

manufacturer specifications and instructions

material safety data sheets (MSDS)

memos

organisation work specifications and requirements

regulatory and legislative requirements, particularly those pertaining to:

building codes

OHS and environmental requirements

plumbing and gasfitting authority regulations

recognised formulas or tables accepted by the regulatory authority

relevant Australian standards

safe work procedures relating to installing Type B appliance flues

signage

verbal, written and graphical instructions

work bulletins

work schedules, plans and specifications.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work plans, specifications and any special instructions are obtained. 
Safety (OHS) requirements associated with installing flues for Type B gas appliances, and workplace environmental requirements, are adhered to throughout the work. 
Quality assurance requirements for company operations are identified and adhered to. 
Approval of system design is obtained in accordance with statutory and regulatory authority and workplace requirements. 
Tasks are planned in conjunction with others involved in or affected by the work. 
Sequence of work is prioritised to suit job requirements. 
Tools and equipment are selected consistent with installing a Type B appliance flue and checked for serviceability. 
Details of dimensions and loads are checked for compliance with plans and specifications. 
Size of flue is calculated in accordance with authority requirements and is appropriate for type of appliance burner. 
Flue is selected for type of appliance and its determined route, in compliance with relevant Australian standards. 
Quantity and type of materials for the installation are calculated from plans and specifications. 
Preparatory work, including any penetration of walls and rooves, is performed in accordance with industry and workplace requirements. 
Installation is completed without damage or distortion to surrounding environment or other services. 
Flue is installed in compliance with relevant Australian standards and authority requirements. 
Sustainability principles and concepts are applied throughout the installation. 
Work area is cleared and materials disposed of, reused or recycled according to legislation, regulations, codes of practice and job specification. 
Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and workplace procedures. 
Information is accessed and documentation completed in accordance with workplace requirements. 

Forms

Assessment Cover Sheet

CPCPGS3020A - Install Type B gas appliance flues
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

CPCPGS3020A - Install Type B gas appliance flues

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: