Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

CPPBDN4006 Mapping and Delivery Guide
Import and transpose information from external sources into digital building design drawings

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency CPPBDN4006 - Import and transpose information from external sources into digital building design drawings
Description
Employability Skills
Learning Outcomes and Application This unit of competency specifies the outcomes required to import drawing files and transpose information from drawings prepared by external surveyors, engineers and construction consultants into existing digital building design drawings for residential, commercial and industrial buildings as defined by the Building Code of Australia (BCA), using building information modelling (BIM)-capable building design software.It also covers understanding and applying functions and options of drawing software for different methods of importing files and for managing elements in imported drawings. The unit supports the work of drafters who assist and work under the supervision and instruction of architects and building designers and who check drawings and reports for accuracy and compliance with relevant legislation, regulations, codes and standards before importing or transposing into existing drawings; and who then check the integrity and accuracy of the completed drawings. Licensing, legislative, regulatory or certification requirements apply to building design drafting in some states. Relevant state and territory regulatory authorities should be consulted to confirm those requirements.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Drafting
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Confirm accuracy and compliance of externally-sourced drawings.
  • Land survey drawings are checked for accuracy according to workplace requirements.
  • Structural engineering drawings are checked for accuracy and compliance according to workplace requirements.
  • Drawings and reports from engineers are checked for accuracy and compliance according to workplace requirements.
  • Drawings, reports and drawing notations from consultants are checked for accuracy and compliance according to workplace requirements.
  • Inaccuracies and non-compliance issues relating to drawings and drawing notations are reported to, and discussed with, architect or building designer.
  • Architect’s or building designer’s observations on externally-sourced drawings are noted.
  • Amended drawings are requested, noted details of amendments required are provided, and amended drawings are obtained from relevant engineers or consultants according to workplace requirements.
       
Element: Import drawings from external sources into digital building design files.
  • Compatibility of digital drawings from external sources for importing into digital building design files is determined and confirmed with architect or building designer.
  • Building design software and work instructions relating to the importing of drawings from external sources are interpreted to determine options to be applied for different building design projects.
  • Method for importing drawings is applied according to work instructions.
  • Import options are applied to incoming files according to work instructions.
  • Files depicting materials and scenery are imported to enhance presentation and conceptual drawings, as required.
  • Digital building design files are re-named and saved according to workplace requirements.
  • Files are checked for integrity, submitted to architect or building designer for approval, and amendments made as directed.
       
Element: Transpose information from externally-sourced drawings into digital building design files.
  • Work instructions for transposing information from externally-sourced drawings into digital building design files are interpreted and confirmed with architect or building designer.
  • Information is added to drawings according to work instructions and checked for accuracy and completeness of transposition according to workplace requirements.
  • Details of externally-sourced documents are added to the list of supporting documents in the drawing set.
  • Digital building design files are re-named and saved according to workplace requirements.
  • Files are checked for integrity, submitted to architect or building designer for approval, and amendments made as directed.
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1.

Confirm accuracy and compliance of externally-sourced drawings.

1.1.

Land survey drawings are checked for accuracy according to workplace requirements.

1.2.

Structural engineering drawings are checked for accuracy and compliance according to workplace requirements.

1.3.

Drawings and reports from engineers are checked for accuracy and compliance according to workplace requirements.

1.4.

Drawings, reports and drawing notations from consultants are checked for accuracy and compliance according to workplace requirements.

1.5.

Inaccuracies and non-compliance issues relating to drawings and drawing notations are reported to, and discussed with, architect or building designer.

1.6.

Architect’s or building designer’s observations on externally-sourced drawings are noted.

1.7.

Amended drawings are requested, noted details of amendments required are provided, and amended drawings are obtained from relevant engineers or consultants according to workplace requirements.

2.

Import drawings from external sources into digital building design files.

2.1.

Compatibility of digital drawings from external sources for importing into digital building design files is determined and confirmed with architect or building designer.

2.2.

Building design software and work instructions relating to the importing of drawings from external sources are interpreted to determine options to be applied for different building design projects.

2.3.

Method for importing drawings is applied according to work instructions.

2.4.

Import options are applied to incoming files according to work instructions.

2.5.

Files depicting materials and scenery are imported to enhance presentation and conceptual drawings, as required.

2.6.

Digital building design files are re-named and saved according to workplace requirements.

2.7.

Files are checked for integrity, submitted to architect or building designer for approval, and amendments made as directed.

3.

Transpose information from externally-sourced drawings into digital building design files.

3.1.

Work instructions for transposing information from externally-sourced drawings into digital building design files are interpreted and confirmed with architect or building designer.

3.2.

Information is added to drawings according to work instructions and checked for accuracy and completeness of transposition according to workplace requirements.

3.3.

Details of externally-sourced documents are added to the list of supporting documents in the drawing set.

3.4.

Digital building design files are re-named and saved according to workplace requirements.

3.5.

Files are checked for integrity, submitted to architect or building designer for approval, and amendments made as directed.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1.

Confirm accuracy and compliance of externally-sourced drawings.

1.1.

Land survey drawings are checked for accuracy according to workplace requirements.

1.2.

Structural engineering drawings are checked for accuracy and compliance according to workplace requirements.

1.3.

Drawings and reports from engineers are checked for accuracy and compliance according to workplace requirements.

1.4.

Drawings, reports and drawing notations from consultants are checked for accuracy and compliance according to workplace requirements.

1.5.

Inaccuracies and non-compliance issues relating to drawings and drawing notations are reported to, and discussed with, architect or building designer.

1.6.

Architect’s or building designer’s observations on externally-sourced drawings are noted.

1.7.

Amended drawings are requested, noted details of amendments required are provided, and amended drawings are obtained from relevant engineers or consultants according to workplace requirements.

2.

Import drawings from external sources into digital building design files.

2.1.

Compatibility of digital drawings from external sources for importing into digital building design files is determined and confirmed with architect or building designer.

2.2.

Building design software and work instructions relating to the importing of drawings from external sources are interpreted to determine options to be applied for different building design projects.

2.3.

Method for importing drawings is applied according to work instructions.

2.4.

Import options are applied to incoming files according to work instructions.

2.5.

Files depicting materials and scenery are imported to enhance presentation and conceptual drawings, as required.

2.6.

Digital building design files are re-named and saved according to workplace requirements.

2.7.

Files are checked for integrity, submitted to architect or building designer for approval, and amendments made as directed.

3.

Transpose information from externally-sourced drawings into digital building design files.

3.1.

Work instructions for transposing information from externally-sourced drawings into digital building design files are interpreted and confirmed with architect or building designer.

3.2.

Information is added to drawings according to work instructions and checked for accuracy and completeness of transposition according to workplace requirements.

3.3.

Details of externally-sourced documents are added to the list of supporting documents in the drawing set.

3.4.

Digital building design files are re-named and saved according to workplace requirements.

3.5.

Files are checked for integrity, submitted to architect or building designer for approval, and amendments made as directed.

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Drawings must include at least one from each of the following:

consultant

engineer

land survey

structural engineering.

Workplace requirements must include:

building design project procedures, including:

communication protocols for liaising with external consultants

file naming, storing and saving systems and procedures

quality requirements

work health and safety requirements

roles and responsibilities of building project team, including extent and limitations of drafter’s role.

Compliance must include:

current Australian standards applicable to the building design

federal, state or territory, and local authority legislation and regulations applicable to the building design

National Construction Code.

Engineers must include one or more of the following:

electrical

fire safety

geotechnical

hydraulic

mechanical.

Consultants must include one or more of the following:

access

acoustic

arborist

bushfire

energy efficiency

flooding

lighting

traffic.

Building design software must include:

BIM-capable current industry-standard software.

Options to be applied must include:

colours

external references

layers

positioning

scale

views.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Land survey drawings are checked for accuracy according to workplace requirements. 
Structural engineering drawings are checked for accuracy and compliance according to workplace requirements. 
Drawings and reports from engineers are checked for accuracy and compliance according to workplace requirements. 
Drawings, reports and drawing notations from consultants are checked for accuracy and compliance according to workplace requirements. 
Inaccuracies and non-compliance issues relating to drawings and drawing notations are reported to, and discussed with, architect or building designer. 
Architect’s or building designer’s observations on externally-sourced drawings are noted. 
Amended drawings are requested, noted details of amendments required are provided, and amended drawings are obtained from relevant engineers or consultants according to workplace requirements. 
Compatibility of digital drawings from external sources for importing into digital building design files is determined and confirmed with architect or building designer. 
Building design software and work instructions relating to the importing of drawings from external sources are interpreted to determine options to be applied for different building design projects. 
Method for importing drawings is applied according to work instructions. 
Import options are applied to incoming files according to work instructions. 
Files depicting materials and scenery are imported to enhance presentation and conceptual drawings, as required. 
Digital building design files are re-named and saved according to workplace requirements. 
Files are checked for integrity, submitted to architect or building designer for approval, and amendments made as directed. 
Work instructions for transposing information from externally-sourced drawings into digital building design files are interpreted and confirmed with architect or building designer. 
Information is added to drawings according to work instructions and checked for accuracy and completeness of transposition according to workplace requirements. 
Details of externally-sourced documents are added to the list of supporting documents in the drawing set. 
Digital building design files are re-named and saved according to workplace requirements. 
Files are checked for integrity, submitted to architect or building designer for approval, and amendments made as directed. 

Forms

Assessment Cover Sheet

CPPBDN4006 - Import and transpose information from external sources into digital building design drawings
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

CPPBDN4006 - Import and transpose information from external sources into digital building design drawings

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: