Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

CPPBDN4008 Mapping and Delivery Guide
Produce digital building design concept drawings

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency CPPBDN4008 - Produce digital building design concept drawings
Description
Employability Skills
Learning Outcomes and Application This unit of competency specifies the outcomes required to produce building design drawings and documentation with appropriate scale and notations using current industry-standard software packages with building information modelling (BIM) capability. The unit supports drafters who assist and work under the supervision and instruction of architects and building designers and produce design documentation for all types of residential, commercial and industrial buildings as defined in the Building Code of Australia (BCA), up to the stage of client approval of the design concept. It also covers ensuring that the drawings and documentation meet compliance requirements for the type of building and location and are formatted and notated to facilitate understanding by the client.Licensing, legislative, regulatory or certification requirements apply to building design drafting in some states. Relevant state and territory regulatory authorities should be consulted to confirm those requirements.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Drafting
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Produce building design sketches
  • Client brief and designer’s concept drawings and notes are reviewed and requirements confirmed.
  • Existing site information and measured drawings are reviewed and information is applied to the production of sketches.
  • Compliance requirements are confirmed and applied to the production of sketches.
  • Building design software and project templates are used according to workplace requirements to produce and save sketches that illustrate designer’s concept, with accurate proportions and within project timelines.
  • Spatial and dimensional awareness is applied when producing sketches to allow ample space for movement of persons.
  • Rendering techniques are applied to sketches as required by designer.
  • Sketches are reviewed in consultation with designer to check that compliance requirements have been addressed, and adjustments are made and saved as required.
  • Scaled renditions of design concept sketches are produced as required.
       
Element: Review and apply designer’s instructions in response to client feedback on building design concept sketches.
  • Designer’s instructions, notes and notations to drawings following client consultations are reviewed and client’s required changes to sketches are confirmed.
  • Sketches are adjusted and cross-checked to confirm that client requirements are incorporated.
  • Impacts of changes on compliance requirements are identified and confirmed through consultation with relevant personnel and according to workplace requirements.
  • Adjusted drawings and identified impacts on compliance requirements are reviewed with designer.
  • Final adjustments to sketches are made according to instructions and following designer’s final consultations with client and other relevant personnel.
  • Sketches are stored and saved according to workplace requirements.
       
Element: Produce building design drawings.
  • Building design software and project templates are used to set up design drawings based on client-approved concept sketches.
  • Details of spatial, structural and technical elements of the building’s design are confirmed with designer and incorporated into building design drawings.
  • Details of strategies to address work health and safety (WHS) issues in the building’s design are confirmed with designer and incorporated into design drawings.
  • Details of sustainable building design for the project are confirmed with designer and incorporated into building design drawings.
  • Readability of drawings is reviewed and drawings are adjusted to ensure clarity of detail, consistency and ease of understanding by clients.
  • Design drawings are saved and stored according to workplace requirements.
  • Design drawings are reviewed in consultation with designers to ensure client and compliance requirements and anomalies are addressed, and drawings are adjusted as required.
  • Design drawings are rendered to watercolour wash or photo-realistic finish as required.
       
Element: Review and apply client feedback to building design drawings.
  • Designer’s instructions, notes and notations to drawings following client consultations are reviewed and client’s required changes to design drawings are confirmed.
  • Design drawings are adjusted and cross-checked to confirm that client requirements are incorporated.
  • Impacts of changes on compliance of building are identified and confirmed according to workplace requirements.
  • Adjusted drawings and identified impacts on compliance requirements are reviewed in consultation with designer.
  • Final adjustments to drawings are made according to instructions and following designer’s final consultations with client and other relevant personnel.
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1.

Produce building design sketches

1.1.

Client brief and designer’s concept drawings and notes are reviewed and requirements confirmed.

1.2.

Existing site information and measured drawings are reviewed and information is applied to the production of sketches.

1.3.

Compliance requirements are confirmed and applied to the production of sketches.

1.4.

Building design software and project templates are used according to workplace requirements to produce and save sketches that illustrate designer’s concept, with accurate proportions and within project timelines.

1.5.

Spatial and dimensional awareness is applied when producing sketches to allow ample space for movement of persons.

1.6.

Rendering techniques are applied to sketches as required by designer.

1.7.

Sketches are reviewed in consultation with designer to check that compliance requirements have been addressed, and adjustments are made and saved as required.

1.8.

Scaled renditions of design concept sketches are produced as required.

2.

Review and apply designer’s instructions in response to client feedback on building design concept sketches.

2.1.

Designer’s instructions, notes and notations to drawings following client consultations are reviewed and client’s required changes to sketches are confirmed.

2.2.

Sketches are adjusted and cross-checked to confirm that client requirements are incorporated.

2.3.

Impacts of changes on compliance requirements are identified and confirmed through consultation with relevant personnel and according to workplace requirements.

2.4.

Adjusted drawings and identified impacts on compliance requirements are reviewed with designer.

2.5.

Final adjustments to sketches are made according to instructions and following designer’s final consultations with client and other relevant personnel.

2.6.

Sketches are stored and saved according to workplace requirements.

3.

Produce building design drawings.

3.1.

Building design software and project templates are used to set up design drawings based on client-approved concept sketches.

3.2.

Details of spatial, structural and technical elements of the building’s design are confirmed with designer and incorporated into building design drawings.

3.3.

Details of strategies to address work health and safety (WHS) issues in the building’s design are confirmed with designer and incorporated into design drawings.

3.4.

Details of sustainable building design for the project are confirmed with designer and incorporated into building design drawings.

3.5.

Readability of drawings is reviewed and drawings are adjusted to ensure clarity of detail, consistency and ease of understanding by clients.

3.6.

Design drawings are saved and stored according to workplace requirements.

3.7.

Design drawings are reviewed in consultation with designers to ensure client and compliance requirements and anomalies are addressed, and drawings are adjusted as required.

3.8.

Design drawings are rendered to watercolour wash or photo-realistic finish as required.

4.

Review and apply client feedback to building design drawings.

4.1.

Designer’s instructions, notes and notations to drawings following client consultations are reviewed and client’s required changes to design drawings are confirmed.

4.2.

Design drawings are adjusted and cross-checked to confirm that client requirements are incorporated.

4.3.

Impacts of changes on compliance of building are identified and confirmed according to workplace requirements.

4.4.

Adjusted drawings and identified impacts on compliance requirements are reviewed in consultation with designer.

4.5.

Final adjustments to drawings are made according to instructions and following designer’s final consultations with client and other relevant personnel.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1.

Produce building design sketches

1.1.

Client brief and designer’s concept drawings and notes are reviewed and requirements confirmed.

1.2.

Existing site information and measured drawings are reviewed and information is applied to the production of sketches.

1.3.

Compliance requirements are confirmed and applied to the production of sketches.

1.4.

Building design software and project templates are used according to workplace requirements to produce and save sketches that illustrate designer’s concept, with accurate proportions and within project timelines.

1.5.

Spatial and dimensional awareness is applied when producing sketches to allow ample space for movement of persons.

1.6.

Rendering techniques are applied to sketches as required by designer.

1.7.

Sketches are reviewed in consultation with designer to check that compliance requirements have been addressed, and adjustments are made and saved as required.

1.8.

Scaled renditions of design concept sketches are produced as required.

2.

Review and apply designer’s instructions in response to client feedback on building design concept sketches.

2.1.

Designer’s instructions, notes and notations to drawings following client consultations are reviewed and client’s required changes to sketches are confirmed.

2.2.

Sketches are adjusted and cross-checked to confirm that client requirements are incorporated.

2.3.

Impacts of changes on compliance requirements are identified and confirmed through consultation with relevant personnel and according to workplace requirements.

2.4.

Adjusted drawings and identified impacts on compliance requirements are reviewed with designer.

2.5.

Final adjustments to sketches are made according to instructions and following designer’s final consultations with client and other relevant personnel.

2.6.

Sketches are stored and saved according to workplace requirements.

3.

Produce building design drawings.

3.1.

Building design software and project templates are used to set up design drawings based on client-approved concept sketches.

3.2.

Details of spatial, structural and technical elements of the building’s design are confirmed with designer and incorporated into building design drawings.

3.3.

Details of strategies to address work health and safety (WHS) issues in the building’s design are confirmed with designer and incorporated into design drawings.

3.4.

Details of sustainable building design for the project are confirmed with designer and incorporated into building design drawings.

3.5.

Readability of drawings is reviewed and drawings are adjusted to ensure clarity of detail, consistency and ease of understanding by clients.

3.6.

Design drawings are saved and stored according to workplace requirements.

3.7.

Design drawings are reviewed in consultation with designers to ensure client and compliance requirements and anomalies are addressed, and drawings are adjusted as required.

3.8.

Design drawings are rendered to watercolour wash or photo-realistic finish as required.

4.

Review and apply client feedback to building design drawings.

4.1.

Designer’s instructions, notes and notations to drawings following client consultations are reviewed and client’s required changes to design drawings are confirmed.

4.2.

Design drawings are adjusted and cross-checked to confirm that client requirements are incorporated.

4.3.

Impacts of changes on compliance of building are identified and confirmed according to workplace requirements.

4.4.

Adjusted drawings and identified impacts on compliance requirements are reviewed in consultation with designer.

4.5.

Final adjustments to drawings are made according to instructions and following designer’s final consultations with client and other relevant personnel.

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Compliance requirements must include:

current Australian standards applicable to the building design

federal, state or territory, and local authority legislation and regulations applicable to the building design

National Construction Code.

Building design software must include:

BIM-capable current industry-standard software.

Workplace requirements must include:

application of drawing conventions according to:

AS1100.101 Technical drawing - General principles

AS1100.301 Technical drawing - Architectural drawing

building design project procedures relating to:

communication protocols for liaising with external consultants

file naming, storing and saving systems and procedures

quality requirements

WHS requirements

roles and responsibilities of building project team, including extent and limitations of drafter’s role.

Rendering techniques must ensure:

depiction of light and shade

range of material finishes

readability.

Review must include:

labelling and notation of drawings

layout

scale

white space.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Client brief and designer’s concept drawings and notes are reviewed and requirements confirmed. 
Existing site information and measured drawings are reviewed and information is applied to the production of sketches. 
Compliance requirements are confirmed and applied to the production of sketches. 
Building design software and project templates are used according to workplace requirements to produce and save sketches that illustrate designer’s concept, with accurate proportions and within project timelines. 
Spatial and dimensional awareness is applied when producing sketches to allow ample space for movement of persons. 
Rendering techniques are applied to sketches as required by designer. 
Sketches are reviewed in consultation with designer to check that compliance requirements have been addressed, and adjustments are made and saved as required. 
Scaled renditions of design concept sketches are produced as required. 
Designer’s instructions, notes and notations to drawings following client consultations are reviewed and client’s required changes to sketches are confirmed. 
Sketches are adjusted and cross-checked to confirm that client requirements are incorporated. 
Impacts of changes on compliance requirements are identified and confirmed through consultation with relevant personnel and according to workplace requirements. 
Adjusted drawings and identified impacts on compliance requirements are reviewed with designer. 
Final adjustments to sketches are made according to instructions and following designer’s final consultations with client and other relevant personnel. 
Sketches are stored and saved according to workplace requirements. 
Building design software and project templates are used to set up design drawings based on client-approved concept sketches. 
Details of spatial, structural and technical elements of the building’s design are confirmed with designer and incorporated into building design drawings. 
Details of strategies to address work health and safety (WHS) issues in the building’s design are confirmed with designer and incorporated into design drawings. 
Details of sustainable building design for the project are confirmed with designer and incorporated into building design drawings. 
Readability of drawings is reviewed and drawings are adjusted to ensure clarity of detail, consistency and ease of understanding by clients. 
Design drawings are saved and stored according to workplace requirements. 
Design drawings are reviewed in consultation with designers to ensure client and compliance requirements and anomalies are addressed, and drawings are adjusted as required. 
Design drawings are rendered to watercolour wash or photo-realistic finish as required. 
Designer’s instructions, notes and notations to drawings following client consultations are reviewed and client’s required changes to design drawings are confirmed. 
Design drawings are adjusted and cross-checked to confirm that client requirements are incorporated. 
Impacts of changes on compliance of building are identified and confirmed according to workplace requirements. 
Adjusted drawings and identified impacts on compliance requirements are reviewed in consultation with designer. 
Final adjustments to drawings are made according to instructions and following designer’s final consultations with client and other relevant personnel. 

Forms

Assessment Cover Sheet

CPPBDN4008 - Produce digital building design concept drawings
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

CPPBDN4008 - Produce digital building design concept drawings

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: