Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

CPPCLO3020 Mapping and Delivery Guide
Pressure wash and clean surfaces

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency CPPCLO3020 - Pressure wash and clean surfaces
Description
Employability Skills
Learning Outcomes and Application This unit of competency specifies the outcomes required to set up and use pressure washing equipment to clean surfaces by producing a variable stream of water or cleaning chemical. The unit covers assessing the extent of the cleaning task, and selecting the equipment, chemicals and cleaning methods required for the task.The unit supports cleaners who work alone or in teams. It applies in a range of commercial and residential work sites.No licensing, legislative, regulatory, or certification requirements apply to this unit of competency at the time of endorsement.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

The following must be present and available to learners during assessment activities:

equipment:

as listed in the range of conditions

PPE as listed in the range of conditions

materials:

cleaning chemicals as listed in the range of conditions

specifications:

equipment operating manuals

product labels

SDS

physical conditions:

suitable work site with range of surfaces as listed in the performance evidence

relationships with team members and supervisor:

work may be conducted alone or as part of a team.

Timeframe:

as specified by the task.

Assessor requirements

As a minimum, assessors must satisfy the assessor requirements in the Standards for Registered Training Organisations (RTOs) current at the time of assessment.

Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare to clean using pressure washing.
  • Type and condition of surfaces to be pressure washed are assessed, job requirements are reviewed, and issues are clarified.
  • Work site hazards are assessed and risks controlled according to company, legislative, and health and safety requirements.
  • Soil types are identified by observation and cleaning chemicals required for the task are selected and prepared.
  • Equipment is selected according to job requirements, checked for serviceability, and faults are rectified or reported before starting work.
  • Personal protective equipment (PPE) is sourced according to manufacturer specifications, and health and safety and company requirements.
  • Signs and barricades are selected and installed according to health and safety, and company requirements.
  • Pre-existing damage is identified and reported according to company requirements.
       
Element: Use pressure washing equipment and techniques.
  • Items requiring protection from pressure spray are covered and secured according to specified requirements.
  • Heavily soiled areas are pre-sprayed according to manufacturer specifications and company requirements.
  • Pressure washing is conducted using equipment and chemicals and according to manufacturer specifications.
  • Hand washing is performed on areas requiring additional treatment, using suitable equipment and chemicals according to manufacturer specifications.
  • Washed area is rinsed using required equipment and allowed to dry.
       
Element: Tidy work site.
  • Collected soil and waste are disposed of according to client and company specifications, and legislative, environmental, and health and safety requirements.
  • Protective coverings are removed and items returned to position according to specified requirements.
  • Signs and barricades are removed according to health and safety, and company requirements.
       
Element: Clean and safety check equipment, and store equipment and chemicals.
  • Equipment and PPE are cleaned, safety checked and stored according to manufacturer specifications and environmental, health and safety, and company requirements.
  • Unused chemicals are stored or disposed of according to manufacturer specifications, and health and safety and company requirements.
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1.

Plan and prepare to clean using pressure washing.

1.1.

Type and condition of surfaces to be pressure washed are assessed, job requirements are reviewed, and issues are clarified.

1.2.

Work site hazards are assessed and risks controlled according to company, legislative, and health and safety requirements.

1.3.

Soil types are identified by observation and cleaning chemicals required for the task are selected and prepared.

1.4.

Equipment is selected according to job requirements, checked for serviceability, and faults are rectified or reported before starting work.

1.5.

Personal protective equipment (PPE) is sourced according to manufacturer specifications, and health and safety and company requirements.

1.6.

Signs and barricades are selected and installed according to health and safety, and company requirements.

1.7.

Pre-existing damage is identified and reported according to company requirements.

2.

Use pressure washing equipment and techniques.

2.1.

Items requiring protection from pressure spray are covered and secured according to specified requirements.

2.2.

Heavily soiled areas are pre-sprayed according to manufacturer specifications and company requirements.

2.3.

Pressure washing is conducted using equipment and chemicals and according to manufacturer specifications.

2.4.

Hand washing is performed on areas requiring additional treatment, using suitable equipment and chemicals according to manufacturer specifications.

2.5.

Washed area is rinsed using required equipment and allowed to dry.

3.

Tidy work site.

3.1.

Collected soil and waste are disposed of according to client and company specifications, and legislative, environmental, and health and safety requirements.

3.2.

Protective coverings are removed and items returned to position according to specified requirements.

3.3.

Signs and barricades are removed according to health and safety, and company requirements.

4.

Clean and safety check equipment, and store equipment and chemicals.

4.1.

Equipment and PPE are cleaned, safety checked and stored according to manufacturer specifications and environmental, health and safety, and company requirements.

4.2.

Unused chemicals are stored or disposed of according to manufacturer specifications, and health and safety and company requirements.

A person demonstrating competency in this unit must satisfy the requirements of the elements, performance criteria, foundation skills and range of conditions of this unit.

The person must also pressure wash three of the following surface types:

brick, including rendered brick surfaces

concrete, including polished concrete

metal surfaces, including industrial kitchen equipment and industrial machinery

painted

polyresin.

In doing the above work, the person must:

remove three of the following different soil types:

graffiti

grease and oil

mould and mildew

pollution marks

identify site hazards and control risks before commencing the task

identify surface and soil types

select and prepare required cleaning equipment, including personal protective equipment (PPE) and cleaning chemicals

use safe and efficient cleaning methods using pressure washing.

A person demonstrating competency in this unit must demonstrate knowledge of:

suitability of different surfaces for pressure washing

key requirements of legislation, regulations, codes of practice and industry advisory standards relating to cleaning using pressure washing, including industry advisory standards and codes, such as dangerous goods codes

processes for safely handling and disposing of waste, including:

chemicals past their expiry date

obsolete equipment

disposal of packaging

sweeping detritus

used containers

used or contaminated PPE

used or unused chemicals

safe handling techniques for working with hazardous chemicals, including:

emergency chemical spill control measures

routes of entry and potential symptoms of exposure to chemicals

safe methods for diluting chemicals

working according to safety data sheets (SDS)

range and functionality of equipment used in pressure washing

procedures for selecting and applying cleaning chemicals required for different surfaces, including:

acid cleaners

alkaline cleaners

low environmental impact chemicals

neutral cleaners

solvent cleaners.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1.

Plan and prepare to clean using pressure washing.

1.1.

Type and condition of surfaces to be pressure washed are assessed, job requirements are reviewed, and issues are clarified.

1.2.

Work site hazards are assessed and risks controlled according to company, legislative, and health and safety requirements.

1.3.

Soil types are identified by observation and cleaning chemicals required for the task are selected and prepared.

1.4.

Equipment is selected according to job requirements, checked for serviceability, and faults are rectified or reported before starting work.

1.5.

Personal protective equipment (PPE) is sourced according to manufacturer specifications, and health and safety and company requirements.

1.6.

Signs and barricades are selected and installed according to health and safety, and company requirements.

1.7.

Pre-existing damage is identified and reported according to company requirements.

2.

Use pressure washing equipment and techniques.

2.1.

Items requiring protection from pressure spray are covered and secured according to specified requirements.

2.2.

Heavily soiled areas are pre-sprayed according to manufacturer specifications and company requirements.

2.3.

Pressure washing is conducted using equipment and chemicals and according to manufacturer specifications.

2.4.

Hand washing is performed on areas requiring additional treatment, using suitable equipment and chemicals according to manufacturer specifications.

2.5.

Washed area is rinsed using required equipment and allowed to dry.

3.

Tidy work site.

3.1.

Collected soil and waste are disposed of according to client and company specifications, and legislative, environmental, and health and safety requirements.

3.2.

Protective coverings are removed and items returned to position according to specified requirements.

3.3.

Signs and barricades are removed according to health and safety, and company requirements.

4.

Clean and safety check equipment, and store equipment and chemicals.

4.1.

Equipment and PPE are cleaned, safety checked and stored according to manufacturer specifications and environmental, health and safety, and company requirements.

4.2.

Unused chemicals are stored or disposed of according to manufacturer specifications, and health and safety and company requirements.

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Surfaces must include at least three of the following:

brick, including rendered brick surfaces

concrete, including polished concrete

metal surfaces, including industrial kitchen equipment and industrial machinery

painted

polyresin.

Hazards that must be assessed include:

biological and environmental contaminants

chemical exposure via absorption, ingestion and inhalation

chemical reactivity

dust and fibre particulates

electrical

environmental allergens

explosions

fatigue

fire

manual handling

noise

poor ventilation

slips, trips and falls

syringes and sharps

working in confined spaces.

Health and safety requirements must include:

access to communication devices when working alone

compliance with Safe Work Australia regulations and guidelines

electrical equipment test and tag compliance

emergency response procedures

environmental controls

hazard signs and barricades

health and safety induction and refresher training

manual handling techniques

processes for safely dispensing chemicals

risk assessment procedures, including:

hazardous chemicals register

hierarchy of control

job safety analyses (JSA) for low-risk situations

safe work method statements (SWMS) for high-risk situations

incident reporting

SDS

selection and use of required PPE

storage and maintenance of equipment according to manufacturer specifications

use of first aid according to SDS information.

Soil types must include at least three of the following:

graffiti

grease and oil

mould and mildew

pollution marks.

Cleaning chemicals must include at least one of the following:

acid cleaners

alkaline cleaners

low environmental impact chemicals

neutral cleaners

solvent cleaners.

Equipment must include at least two of the following:

brooms

cloths

hoses

lances

pressure washers

squeegees

wet area electrical safety connections.

Personal protective equipment must include at least three of the following:

ear muffs and plugs

gloves

eye protection

disposable respirators

safety shoes

sun protection

wet-work clothing.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Type and condition of surfaces to be pressure washed are assessed, job requirements are reviewed, and issues are clarified. 
Work site hazards are assessed and risks controlled according to company, legislative, and health and safety requirements. 
Soil types are identified by observation and cleaning chemicals required for the task are selected and prepared. 
Equipment is selected according to job requirements, checked for serviceability, and faults are rectified or reported before starting work. 
Personal protective equipment (PPE) is sourced according to manufacturer specifications, and health and safety and company requirements. 
Signs and barricades are selected and installed according to health and safety, and company requirements. 
Pre-existing damage is identified and reported according to company requirements. 
Items requiring protection from pressure spray are covered and secured according to specified requirements. 
Heavily soiled areas are pre-sprayed according to manufacturer specifications and company requirements. 
Pressure washing is conducted using equipment and chemicals and according to manufacturer specifications. 
Hand washing is performed on areas requiring additional treatment, using suitable equipment and chemicals according to manufacturer specifications. 
Washed area is rinsed using required equipment and allowed to dry. 
Collected soil and waste are disposed of according to client and company specifications, and legislative, environmental, and health and safety requirements. 
Protective coverings are removed and items returned to position according to specified requirements. 
Signs and barricades are removed according to health and safety, and company requirements. 
Equipment and PPE are cleaned, safety checked and stored according to manufacturer specifications and environmental, health and safety, and company requirements. 
Unused chemicals are stored or disposed of according to manufacturer specifications, and health and safety and company requirements. 

Forms

Assessment Cover Sheet

CPPCLO3020 - Pressure wash and clean surfaces
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

CPPCLO3020 - Pressure wash and clean surfaces

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: