Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

CPPSEC3115 Mapping and Delivery Guide
Carry, operate and maintain revolvers for security purposes

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency CPPSEC3115 - Carry, operate and maintain revolvers for security purposes
Description
Employability Skills
Learning Outcomes and Application This unit specifies the skills and knowledge required to safely and legally carry, operate and maintain revolvers for security purposes.It includes: reviewing and complying with range rules and procedures, workplace policies and legal rights and responsibilities including firearms and weapons Acts and workplace health and safety (WHS)selecting and checking the revolver, ammunition, duty gear and required personal protective equipment (PPE), and following manufacturers’ specifications to ensure correct and safe operationoperating a revolver demonstrating correct techniques for loading and unloading, draw and recovery, retention, shooting and discharging multiple shots at the same target and multiple targets to the required standard of accuracydischarging a revolver at an approved range following local range rules and instructions from range personnelcleaning and maintaining revolvers following point, remove, observe, verify and examine (PROVE) safety procedures.It applies to people working independently or under limited supervision as members of a security team.This unit may form part of the licensing requirements for people engaged in security operations in those states and territories where these are regulated activities.Note: This unit requires appropriate permits to be obtained to conduct firearms training in some states and territories.This unit does not result in a firearms licence or permit. Refer to the regulatory requirements of individual states and territories.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to carry and operate revolver.
  • Review workplace policies and procedures including WHS to ensure compliance with legal rights and responsibilities when carrying and operating revolvers for security purposes.
  • Select revolver and correct ammunition and duty gear for revolver type, and use required personal protective equipment (PPE) and clothing.
  • Check that equipment is operational following manufacturers’ instructions and rectify or report faults or malfunctions.
       
Element: Draw, use and recover revolver.
  • Check and load ammunition following manufacturers’ instructions and safely recover revolver.
  • Draw revolver safely to ready position.
  • Operate revolver demonstrating compliance with fundamentals of shooting principles.
  • Control revolver to demonstrate correct retention techniques.
  • Use available cover and concealment, and demonstrate correct techniques for low light shooting.
  • Discharge multiple shots at the same target and multiple targets to meet the required standard of accuracy.
  • Perform immediate and remedial actions in the event of revolver malfunction.
  • Safely unload and recover revolver.
       
Element: Discharge revolver at approved range.
  • Interpret and comply with local range rules at approved shooting range.
  • Select and fit PPE including hearing and eye protection, and baseball cap to comply with range rules.
  • Handle revolver according to fundamentals of shooting principles.
  • Follow commands from range personnel or firearms instructors.
  • Select correct ammunition for revolver and load as instructed by range personnel or firearms instructor.
  • Discharge revolver to meet approved course of fire and achieve required standards.
  • Complete range register and incident report as required.
       
Element: Clean and maintain revolver.
  • Apply PROVE procedures to physically check revolver, swing out cylinder and confirm that the chamber is empty prior to cleaning.
  • Select and use correct tools and cleaning kit for revolver following manufacturers’ instructions.
  • Access a suitable venue to clean revolver following WHS procedures.
  • Disassemble and clean revolver following manufacturers’ instructions.
  • Reassemble revolver and inspect to confirm safety and correct operation.
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Review workplace policies and procedures including WHS to ensure compliance with legal rights and responsibilities when carrying and operating revolvers for security purposes. 
Select revolver and correct ammunition and duty gear for revolver type, and use required personal protective equipment (PPE) and clothing. 
Check that equipment is operational following manufacturers’ instructions and rectify or report faults or malfunctions. 
Check and load ammunition following manufacturers’ instructions and safely recover revolver. 
Draw revolver safely to ready position. 
Operate revolver demonstrating compliance with fundamentals of shooting principles. 
Control revolver to demonstrate correct retention techniques. 
Use available cover and concealment, and demonstrate correct techniques for low light shooting. 
Discharge multiple shots at the same target and multiple targets to meet the required standard of accuracy. 
Perform immediate and remedial actions in the event of revolver malfunction. 
Safely unload and recover revolver. 
Interpret and comply with local range rules at approved shooting range. 
Select and fit PPE including hearing and eye protection, and baseball cap to comply with range rules. 
Handle revolver according to fundamentals of shooting principles. 
Follow commands from range personnel or firearms instructors. 
Select correct ammunition for revolver and load as instructed by range personnel or firearms instructor. 
Discharge revolver to meet approved course of fire and achieve required standards. 
Complete range register and incident report as required. 
Apply PROVE procedures to physically check revolver, swing out cylinder and confirm that the chamber is empty prior to cleaning. 
Select and use correct tools and cleaning kit for revolver following manufacturers’ instructions. 
Access a suitable venue to clean revolver following WHS procedures. 
Disassemble and clean revolver following manufacturers’ instructions. 
Reassemble revolver and inspect to confirm safety and correct operation. 

Forms

Assessment Cover Sheet

CPPSEC3115 - Carry, operate and maintain revolvers for security purposes
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

CPPSEC3115 - Carry, operate and maintain revolvers for security purposes

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: