Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

CPPSIS6034 Mapping and Delivery Guide
Conduct mining geology operations

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency CPPSIS6034 - Conduct mining geology operations
Description
Employability Skills
Learning Outcomes and Application This unit of competency specifies the outcomes required to conduct mining geology operations. The unit covers analysing organisational priorities and specifications to identify projects; and planning projects to identify and document factors, such as objectives, deliverables, risks, constraints and equipment requirements, in order to comply with regulations and legislation applicable to the mining industry. The unit also covers analysing mining geology to assess and recognise geological aspects of possible ore deposits, rock types and structures, and levels of rock stability and ground support; using surveying techniques to take measurements and reduce and manipulate spatial data to assist in analysing the geology of the mining operation. The unit requires the ability to implement project management activities relating to scheduling, measuring, recording, monitoring and reporting work progress. It also requires the ability to evaluate project activities and outcomes for compliance with specifications. It requires knowledge of underground mining and mining geology operations.The unit supports surveyors of mine geology who work in a surveying team in a mining environment.Licensing, legislative, regulatory or certification requirements apply to this unit in some States where mining surveying must be undertaken under the supervision of a registered surveyor. Relevant state and territory regulatory authorities should be consulted to confirm those requirements.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

The following must be present and available to learners during assessment activities:

equipment:

as specified in the performance evidence, including PPE

specifications:

mining and surveying specifications, including relevant plans and drawings

organisational policies, procedures and documentation relating to work health and safety

relevant legislation and regulations relating to mines safety

relationships with team members and supervisor:

lead role in a team.

Timeframe:

as specified by project requirements.

Assessor requirements

As a minimum, assessors must satisfy the assessor requirements in the Standards for Registered Training Organisations (RTOs) current at the time of assessment.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Identify and plan project.
  • Organisational priorities are determined to identify project objectives and specifications.
  • Project specifications are presented to appropriate persons.
  • Project objectives, deliverables, constraints, environmental considerations and work activities are planned and documented according to organisational requirements.
  • Mining regulations with regard to management and safety are detailed according to legislative and organisational requirements.
  • Equipment is selected and checked to ensure correct operation and functionality according to organisational requirements.
       
Element: Analyse mining geology.
  • Geological aspects of possible ore deposits are identified by assessing the environment, and information is verified.
  • Rock types and structures fundamental to mining operations are identified and analysed according to project specifications.
  • Levels of rock stability and ground support requirements are observed according to project specifications.
  • Ore and minerals fundamental to mining operations are identified and analysed according to project specifications.
  • Methods for obtaining ore and mineral samples are identified and analysed according to project specifications.
  • Measurements are conducted and spatial data is reduced and manipulated according to project specifications.
       
Element: Manage project.
  • Project management mechanisms are implemented to schedule, record and report progress of activities in relation to agreed timeframes and plans.
  • Agreed communication processes between client and other appropriate persons are implemented and maintained.
  • Pertinent legal and statutory requirements and standards are identified and analysed to ensure compliance.
  • Risk management and contingency strategies are devised and followed to ensure project complies with legal and statutory standards and organisational requirements.
  • Problems are identified and resolved, and contingencies and constraints are managed according to organisational requirements.
       
Element: Finalise project.
  • Mining geology project is evaluated for compliance with project specifications and organisational requirements.
  • Appropriate persons are notified of project results according to organisational requirements.
  • Documentation is completed and spatial data archived according to project and organisational requirements.
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1.

Identify and plan project.

1.1.

Organisational priorities are determined to identify project objectives and specifications.

1.2.

Project specifications are presented to appropriate persons.

1.3.

Project objectives, deliverables, constraints, environmental considerations and work activities are planned and documented according to organisational requirements.

1.4.

Mining regulations with regard to management and safety are detailed according to legislative and organisational requirements.

1.5.

Equipment is selected and checked to ensure correct operation and functionality according to organisational requirements.

2.

Analyse mining geology.

2.1.

Geological aspects of possible ore deposits are identified by assessing the environment, and information is verified.

2.2.

Rock types and structures fundamental to mining operations are identified and analysed according to project specifications.

2.3.

Levels of rock stability and ground support requirements are observed according to project specifications.

2.4.

Ore and minerals fundamental to mining operations are identified and analysed according to project specifications.

2.5.

Methods for obtaining ore and mineral samples are identified and analysed according to project specifications.

2.6.

Measurements are conducted and spatial data is reduced and manipulated according to project specifications.

3.

Manage project.

3.1.

Project management mechanisms are implemented to schedule, record and report progress of activities in relation to agreed timeframes and plans.

3.2.

Agreed communication processes between client and other appropriate persons are implemented and maintained.

3.3.

Pertinent legal and statutory requirements and standards are identified and analysed to ensure compliance.

3.4.

Risk management and contingency strategies are devised and followed to ensure project complies with legal and statutory standards and organisational requirements.

3.5.

Problems are identified and resolved, and contingencies and constraints are managed according to organisational requirements.

4.

Finalise project.

4.1.

Mining geology project is evaluated for compliance with project specifications and organisational requirements.

4.2.

Appropriate persons are notified of project results according to organisational requirements.

4.3.

Documentation is completed and spatial data archived according to project and organisational requirements.

A person demonstrating competency in this unit must satisfy the requirements of the elements, performance criteria, foundation skills and range of conditions of this unit. The person must also conduct mining geology operations for two different projects.

While conducting the above mining geology operations, the person must:

assess the environment to recognise geological aspects of possible ore deposits

analyse mining geology to report on:

geological aspects of possible ore deposits

rock types and structures

levels of rock stability and ground support

ore and minerals fundamental to mining operations

methods for obtaining ore and mineral samples

communicate clearly with clients and others to clarify and report project information

comply with organisational policies and procedures, standards, mining regulations and legislation when planning and implementing project activities

evaluate mining geology projects for compliance with specifications and identify non-conformances

measure geological survey components using two of the following pieces of equipment:

current meter

echo sounder

global navigation satellite system (GNSS)

level

remote sensing

tape

total station

perform calculations to measure, reduce and validate spatial data captured from surveying tasks

plan and implement project management mechanisms to ensure the project is completed within required timeframes and complies with specifications and standards

plan and implement risk and contingency management strategies

use computers and relevant software applications to manipulate spatial data and develop reports

work safely, using personal protective equipment (PPE) when performing surveying tasks.

A person demonstrating competency in this unit must demonstrate knowledge of:

accuracy and precision requirements for mining geology surveying operations

basic characteristics of common ore and mineral deposits

classification of economic mineral deposits and the process involved in presenting a schematic model

data capture and set-out techniques

data reduction and manipulation techniques

methods for assessing the environment to recognise ore deposits

methods for obtaining ore and mineral samples

mineral exploration methods, including geophysical, geochemical and geological techniques

mining methods for metalliferous and coal mines

organisational policies and procedures, standards, regulations and legislation relating to:

client and stakeholder communication

mining industry and mine design, including:

mine access

layout

service provision, such as water, air, power, lighting and dewatering

mines safety

records and reporting

risk and contingency management

using the equipment specified in the performance evidence

phases and stages of exploration procedures and possible methods of exploration relevant to each

physical and chemical characteristics of rock types and structures fundamental to mining operations

project management techniques for scheduling, measuring and monitoring work progress and planning for risks and contingencies

techniques for providing rock stability and ground support relating to underground mining.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1.

Identify and plan project.

1.1.

Organisational priorities are determined to identify project objectives and specifications.

1.2.

Project specifications are presented to appropriate persons.

1.3.

Project objectives, deliverables, constraints, environmental considerations and work activities are planned and documented according to organisational requirements.

1.4.

Mining regulations with regard to management and safety are detailed according to legislative and organisational requirements.

1.5.

Equipment is selected and checked to ensure correct operation and functionality according to organisational requirements.

2.

Analyse mining geology.

2.1.

Geological aspects of possible ore deposits are identified by assessing the environment, and information is verified.

2.2.

Rock types and structures fundamental to mining operations are identified and analysed according to project specifications.

2.3.

Levels of rock stability and ground support requirements are observed according to project specifications.

2.4.

Ore and minerals fundamental to mining operations are identified and analysed according to project specifications.

2.5.

Methods for obtaining ore and mineral samples are identified and analysed according to project specifications.

2.6.

Measurements are conducted and spatial data is reduced and manipulated according to project specifications.

3.

Manage project.

3.1.

Project management mechanisms are implemented to schedule, record and report progress of activities in relation to agreed timeframes and plans.

3.2.

Agreed communication processes between client and other appropriate persons are implemented and maintained.

3.3.

Pertinent legal and statutory requirements and standards are identified and analysed to ensure compliance.

3.4.

Risk management and contingency strategies are devised and followed to ensure project complies with legal and statutory standards and organisational requirements.

3.5.

Problems are identified and resolved, and contingencies and constraints are managed according to organisational requirements.

4.

Finalise project.

4.1.

Mining geology project is evaluated for compliance with project specifications and organisational requirements.

4.2.

Appropriate persons are notified of project results according to organisational requirements.

4.3.

Documentation is completed and spatial data archived according to project and organisational requirements.

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Appropriate persons must include at least two of the following:

client

colleague

engineer

manager

registered or qualified surveyor

supplier.

Environmental considerations must include at least one of the following:

chemical leakage

coal fire

erosion

loss of biodiversity

sinkhole formation

soil, groundwater and surface water contamination.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Organisational priorities are determined to identify project objectives and specifications. 
Project specifications are presented to appropriate persons. 
Project objectives, deliverables, constraints, environmental considerations and work activities are planned and documented according to organisational requirements. 
Mining regulations with regard to management and safety are detailed according to legislative and organisational requirements. 
Equipment is selected and checked to ensure correct operation and functionality according to organisational requirements. 
Geological aspects of possible ore deposits are identified by assessing the environment, and information is verified. 
Rock types and structures fundamental to mining operations are identified and analysed according to project specifications. 
Levels of rock stability and ground support requirements are observed according to project specifications. 
Ore and minerals fundamental to mining operations are identified and analysed according to project specifications. 
Methods for obtaining ore and mineral samples are identified and analysed according to project specifications. 
Measurements are conducted and spatial data is reduced and manipulated according to project specifications. 
Project management mechanisms are implemented to schedule, record and report progress of activities in relation to agreed timeframes and plans. 
Agreed communication processes between client and other appropriate persons are implemented and maintained. 
Pertinent legal and statutory requirements and standards are identified and analysed to ensure compliance. 
Risk management and contingency strategies are devised and followed to ensure project complies with legal and statutory standards and organisational requirements. 
Problems are identified and resolved, and contingencies and constraints are managed according to organisational requirements. 
Mining geology project is evaluated for compliance with project specifications and organisational requirements. 
Appropriate persons are notified of project results according to organisational requirements. 
Documentation is completed and spatial data archived according to project and organisational requirements. 

Forms

Assessment Cover Sheet

CPPSIS6034 - Conduct mining geology operations
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

CPPSIS6034 - Conduct mining geology operations

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: