Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

DEFEXO085 Mapping and Delivery Guide
Apply knowledge of explosive physics

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency DEFEXO085 - Apply knowledge of explosive physics
Description
Employability Skills
Learning Outcomes and Application This unit describes the skills required to analyse and apply knowledge of the physics of explosives. The application of the knowledge of explosive physics is specific to the work being undertaken by individuals involved within a variety of applications including manufacturing, policy development, technical manual development, platform integration, configuration, staff processes, transport, disposal, trials and inter-operability.This unit applies to those required to analyse the physics of explosives in the context of their work environment and in relation to their workplace functions.The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to.Those undertaking this unit would make high level, fully independent judgements, applying a detailed knowledge of the physics of explosives, analysing complex data and producing specific documents detailing the outcomes of highly specialised technical functions. They would perform sophisticated tasks in a broad range of specialised contexts.No licensing, legislative or certification requirements apply to unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must hold credentials specified within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must satisfy the Principles of Assessment and Rules of Evidence and all regulatory requirements included within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur in workplace operational situations. Where this is not appropriate, assessment must occur in simulated workplace operational situations that reflect workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or simulations

acceptable means of simulation assessment

applicable documentation, including workplace procedures, regulations, codes of practice and operation manuals

relevant materials, tools, equipment and PPE currently used in industry.
Prerequisites/co-requisites
Competency Field Explosive Ordnance
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Access and analyse relevant explosive physics information
  • Identify the purpose of the required analysis, including the relevance of the physics of explosives.
  • Identify and obtain explosives safety, legislative and statutory requirements.
  • Analyse the information obtained to determine the relevance within its application and in the context of the organisation.
  • Formulate outcomes of the analysis and provide recommendations.
       
Element: Implement recommendations specific to explosive physics
  • Establish work being undertaken and apply the relevant recommendations.
  • Assess, review and record effectiveness of the recommendations.
  • Adjust recommendations if required and document for future application.
       
Element: Access and analyse relevant explosive physics information
  • Identify the purpose of the required analysis, including the relevance of the physics of explosives
       
Element: Identify and obtain explosives safety, legislative and statutory requirements
       
Element: Analyse the information obtained to determine the relevance within its application and in the context of the organisation
       
Element: Formulate outcomes of the analysis and provide recommendations
       
Element: Implement recommendations specific to explosive physics
  • Establish work being undertaken and apply the relevant recommendations
       
Element: Assess, review and record effectiveness of the recommendations
       
Element: Adjust recommendations if required and document for future application
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and includes:

adhering to relevant work health and safety requirements and operational safety

analysing and evaluating information

applying safety, legislative and statutory requirements relevant to explosive physics

conducting research

identifying relevant information

interpreting organisation role relevant to explosive physics

using appropriate information technology and software

writing research reports including recommendations

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and includes:

operational knowledge of:

comparative measures of an explosive, including:

brisance

compatibility

critical diameter

detonation pressure

figure of insensitivity

gas volume

heat of explosion

power index

power of explosive

rate of burning

sensitiveness

sensitivity

stability

temperature of explosion

TNT equivalence

velocity of detonation

electro explosive hazards (EEH) protection

generic design principles to the design and selection of a weapon system, including:

aerodynamics

ballistics

bombs

egress systems

electronic protection measures

fuze systems

guidance and seeker systems

gun systems

hydrodynamics

platform integration

propulsion systems

pyrotechnics

warheads

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the Companion Volume Implementation Guide.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Identify the purpose of the required analysis, including the relevance of the physics of explosives. 
Identify and obtain explosives safety, legislative and statutory requirements. 
Analyse the information obtained to determine the relevance within its application and in the context of the organisation. 
Formulate outcomes of the analysis and provide recommendations. 
Establish work being undertaken and apply the relevant recommendations. 
Assess, review and record effectiveness of the recommendations. 
Adjust recommendations if required and document for future application. 
Identify the purpose of the required analysis, including the relevance of the physics of explosives 
 
 
 
Establish work being undertaken and apply the relevant recommendations 
 
 

Forms

Assessment Cover Sheet

DEFEXO085 - Apply knowledge of explosive physics
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

DEFEXO085 - Apply knowledge of explosive physics

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: