Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

DEFEXO087 Mapping and Delivery Guide
Assess the safety and suitability for service of explosives

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency DEFEXO087 - Assess the safety and suitability for service of explosives
Description
Employability Skills
Learning Outcomes and Application This unit describes the skills required to assess if the explosives will present an unacceptable hazard to the lives of Defence personnel or the public while being transported, stored or operated in a defined environment. It will also assess if explosives will function as designed and are not unacceptably degraded by the service environments encountered during the service life. It includes the requirement to identify the scope of the assessment process and to determine the requirement for any testing or trials prior to introduction into service. The assessment is complex due to:scopedegree of riskenvironmental, political, cultural and social factors that applyconsequences of failuredegree of controlThis unit applies to those required to conduct an analysis of identified explosives for the purpose of determining their safety and suitability for service.The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to.Those undertaking this unit would make high level, fully independent judgements, applying a detailed knowledge of explosives, analysing complex data and producing specific documents detailing the outcomes of highly specialised technical functions. They would perform sophisticated tasks in highly specialised operational contexts.No licensing, legislative or certification requirements apply to unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must hold credentials specified within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must satisfy the Principles of Assessment and Rules of Evidence and all regulatory requirements included within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur in workplace operational situations. Where this is not appropriate, assessment must occur in simulated workplace operational situations that reflect workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or simulations

acceptable means of simulation assessment

applicable documentation, including workplace procedures, regulations, codes of practice and operation manuals

relevant materials, tools, equipment and PPE currently used in industry.
Prerequisites/co-requisites
Competency Field Explosive Ordnance
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for a safety and suitability for service assessment of explosives
  • Receive and confirm assessment requirements and the agreed customer requirements
       
Element: Identify the design precedents and safety principles of the explosives
       
Element: Identify and confirm life cycle events for the explosives
       
Element: Identify and define the predicted service environment for the explosives
       
Element: Conduct explosive hazard assessment
  • Identify hazards associated with the explosives
       
Element: Evaluate hazards and determine the risk index for the explosives
       
Element: Identify system hazards for the explosives
       
Element: Identify and record actions to eliminate or control the hazards for stakeholder consideration
       
Element: Conduct explosive design assessment
  • Identify explosive chemistry
       
Element: Identify and assess explosive train components
       
Element: Identify and assess the environmental conditions for the explosives
       
Element: Evaluate the usage and disposal requirements of the explosives
       
Element: Determine the requirement of explosive trials or tests
  • Determine the requirement for conduct of trials and/or evaluation of explosives
       
Element: Provide written instructions for trials and/or evaluation to the appropriate testing authority
       
Element: Conduct analysis of trials and/or evaluation outcomes
       
Element: Incorporate trial and/or evaluation outcomes in relevant reports and other documentation
       
Element: Report and provide guidance on explosive safety and suitability for service
  • Record and report outcomes to all relevant stakeholders
       
Element: Finalise relevant safety and suitability for service certification and documentation
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and includes:

accessing and preparing information electronically or in hard copy

applying risk management techniques

communicating with stakeholders using a range of communication styles to suit different audiences and purposes

scheduling multiple agencies

writing recommendations and preparing plans requiring precision of expression

conducting hazard and design assessments

determining the requirements for trials or testing

defining and documenting the Manufacture to Disposal Sequence (MTDS)

providing technical advice to authorities

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and includes:

Operational knowledge of:

integrated logistics support requirements for explosives

In-depth knowledge of:

management tools suited to implementing safety and suitability for service evaluation processes

principles relating to the implementation of safety and suitability for service evaluation processes

explosive chemistry/physics/materials/design principles

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the Companion Volume Implementation Guide.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Receive and confirm assessment requirements and the agreed customer requirements 
 
 
 
Identify hazards associated with the explosives 
 
 
 
Identify explosive chemistry 
 
 
 
Determine the requirement for conduct of trials and/or evaluation of explosives 
 
 
 
Record and report outcomes to all relevant stakeholders 
 

Forms

Assessment Cover Sheet

DEFEXO087 - Assess the safety and suitability for service of explosives
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

DEFEXO087 - Assess the safety and suitability for service of explosives

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: