Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

DEFWDV007 Mapping and Delivery Guide
Dive using closed-circuit breathing apparatus (HeO2) in open water to a maximum depth of 60 metres

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency DEFWDV007 - Dive using closed-circuit breathing apparatus (HeO2) in open water to a maximum depth of 60 metres
Description
Employability Skills
Learning Outcomes and Application This unit specifies the skills and knowledge required to dive using closed circuit breathing apparatus (CCBA) (HeO2) in an open water environment to a maximum depth of 60 metres.It includes operating the HeO2 compressor/handbooster pump, inspecting and operating CCBA (HeO2) equipment, and conducting CCBA (HeO2) specific contingency drills.This unit applies to persons working as Defence Divers but could also apply to others working as work divers.The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to.Persons undertaking this unit work independently and perform specific tasks in a range of contexts that could be unpredictable.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur in workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in simulated workplace operational situations that replicate workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or other simulations

relevant and appropriate materials, tools, equipment and personal protective equipment currently used in industry

oceans, seas, lakes and rivers with a range of conditions, and diurnal and nocturnal environments

relevant documentation including organisational procedures, regulations, codes of practice and CCBA (HeO2) operation manuals.

When practicable, assessment should relate to the diver’s vocational focus.

Prerequisites/co-requisites
Competency Field Work Diving
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Operate an HeO2 compressor/hand-booster pump
  • Inspect compressor and associated equipment for serviceability and report faults in accordance with operational procedures
  • Fit appropriate protective equipment in accordance with organisational procedures
  • Connect leads and hoses to compressor in accordance with manufacturer instructions
  • Charge gas cylinders to maximum working pressure and record details in relevant logs in accordance with organisational procedures
  • Conduct operator level maintenance on compressor and report faults, as required in accordance with organisational procedures
  • Undertake activity to de-service compressor after use in accordance with operational requirements
       
Element: Conduct dive operations
  • Select, inspect and fit CCBA (HeO2), and conduct apparatus test as part of dive preparations prior to entering water and in water, in accordance with dive plan
  • Undertake dive activities using CCBA (HeO2) and demonstrate relevant dive contingencies in accordance with organisational procedures and dive plan
  • Undertake activity to de-service CCBA (HeO2) and report defects in accordance with operational procedures
  • Maintain situational awareness of other divers during dive operations
  • Conduct a mid-water casualty handover between an HeO2 standby diver and an air standby diver, in accordance with dive plan
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Operate an HeO2 compressor/hand-booster pump

1.1

Inspect compressor and associated equipment for serviceability and report faults in accordance with operational procedures

1.2

Fit appropriate protective equipment in accordance with organisational procedures

1.3

Connect leads and hoses to compressor in accordance with manufacturer instructions

1.4

Charge gas cylinders to maximum working pressure and record details in relevant logs in accordance with organisational procedures

1.5

Conduct operator level maintenance on compressor and report faults, as required in accordance with organisational procedures

1.6

Undertake activity to de-service compressor after use in accordance with operational requirements

2

Conduct dive operations

2.1

Select, inspect and fit CCBA (HeO2), and conduct apparatus test as part of dive preparations prior to entering water and in water, in accordance with dive plan

2.2

Undertake dive activities using CCBA (HeO2) and demonstrate relevant dive contingencies in accordance with organisational procedures and dive plan

2.3

Undertake activity to de-service CCBA (HeO2) and report defects in accordance with operational procedures

2.4

Maintain situational awareness of other divers during dive operations

2.5

Conduct a mid-water casualty handover between an HeO2 standby diver and an air standby diver, in accordance with dive plan

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least four separate dives, with diver diving to a depth not greater than 60 metres using closed-circuit breathing apparatus (CCBA) (HeO2) in open water (oceans, seas, lakes and rivers) and include:

applying relevant industry standards, and organisational policies and procedures

conducting CCBA (HeO2) dive operations:

in open water to a maximum depth of 60 metres during the day and at night

in water time of 60 minutes

with a total accrued sub-surface time of 0–60 minutes

in a range of sub-surface conditions including:

a range of surface and sub-surface hazards

current (0–2 knots)

temperature (0 degrees +)

visibility (0 metre +)

conducting unconscious companion diver drills in accordance with dive plan

identifying changes in divers, including distress and illness at depth

inspecting and preparing CCBA (HeO2) equipment and gauges monitoring CCBA (HeO2) equipment and gauges

operating an HeO2 compressor/handbooster pump in accordance with manufacturer specifications.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

CCBA (HeO2) characteristics and limitations

CCBA (HeO2) dive equipment specifications and limitations

dive physics

dive physiology and medicine including:

heat and cold illnesses

compression illnesses

decompression illnesses

diving descent and ascent techniques

general diving safety awareness including:

diving in harbours

diving in tidal waters, currents and tides

diving on and/or near a ship’s bottom

lost/separated

entrapment/foul lines

marine animal threats

pollution/weeds

working in confined spaces

hazards of Heliox

relevant diving safety awareness

relevant industry standards, and organisational policies and procedures

safe operating ranges for airsupplies

standby diver responsibilities.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Operate an HeO2 compressor/hand-booster pump

1.1

Inspect compressor and associated equipment for serviceability and report faults in accordance with operational procedures

1.2

Fit appropriate protective equipment in accordance with organisational procedures

1.3

Connect leads and hoses to compressor in accordance with manufacturer instructions

1.4

Charge gas cylinders to maximum working pressure and record details in relevant logs in accordance with organisational procedures

1.5

Conduct operator level maintenance on compressor and report faults, as required in accordance with organisational procedures

1.6

Undertake activity to de-service compressor after use in accordance with operational requirements

2

Conduct dive operations

2.1

Select, inspect and fit CCBA (HeO2), and conduct apparatus test as part of dive preparations prior to entering water and in water, in accordance with dive plan

2.2

Undertake dive activities using CCBA (HeO2) and demonstrate relevant dive contingencies in accordance with organisational procedures and dive plan

2.3

Undertake activity to de-service CCBA (HeO2) and report defects in accordance with operational procedures

2.4

Maintain situational awareness of other divers during dive operations

2.5

Conduct a mid-water casualty handover between an HeO2 standby diver and an air standby diver, in accordance with dive plan

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the Companion Volume Implementation Guide.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Inspect compressor and associated equipment for serviceability and report faults in accordance with operational procedures 
Fit appropriate protective equipment in accordance with organisational procedures 
Connect leads and hoses to compressor in accordance with manufacturer instructions 
Charge gas cylinders to maximum working pressure and record details in relevant logs in accordance with organisational procedures 
Conduct operator level maintenance on compressor and report faults, as required in accordance with organisational procedures 
Undertake activity to de-service compressor after use in accordance with operational requirements 
Select, inspect and fit CCBA (HeO2), and conduct apparatus test as part of dive preparations prior to entering water and in water, in accordance with dive plan 
Undertake dive activities using CCBA (HeO2) and demonstrate relevant dive contingencies in accordance with organisational procedures and dive plan 
Undertake activity to de-service CCBA (HeO2) and report defects in accordance with operational procedures 
Maintain situational awareness of other divers during dive operations 
Conduct a mid-water casualty handover between an HeO2 standby diver and an air standby diver, in accordance with dive plan 

Forms

Assessment Cover Sheet

DEFWDV007 - Dive using closed-circuit breathing apparatus (HeO2) in open water to a maximum depth of 60 metres
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

DEFWDV007 - Dive using closed-circuit breathing apparatus (HeO2) in open water to a maximum depth of 60 metres

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: