|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
OHS requirements: | are to be in line with applicable Commonwealth, State or Territory legislation and regulations, and organisational safety policies and procedures, and may include: personal protective equipment and clothing safety equipment first aid equipment fire fighting equipment hazard and risk control fatigue management elimination of hazardous materials and substances safe forest practices including required actions relating to forest fire manual handling including shifting, lifting and carrying machine isolation and guarding |
Environmental requirements may include: | legislation organisational policies and procedures workplace practices |
Legislative requirements: | are to be in line with applicable Commonwealth, State or Territory legislation, regulations, certification requirements and codes of practice and may include: award and enterprise agreements industrial relations Australian Standards confidentiality and privacy OHS the environment equal opportunity anti-discrimination relevant industry codes of practice duty of care |
Organisational requirements may include: | legal organisational and site guidelines policies and procedures relating to own role and responsibility quality assurance procedural manuals quality and continuous improvement processes and standards OHS, emergency and evacuation procedures ethical standards recording and reporting requirements equipment use and maintenance and storage requirements environmental management requirements (waste minimisation and disposal, recycling and re-use guidelines) |
Work order is to include: | instructions for the repair of frame saw blades in designated equipment and may include: instructions for the environmental monitoring of work and procedures environmental care requirements relevant to the work |
Appropriate personnel may include: | supervisors suppliers clients colleagues managers |
Frame saw blades are to include: | large heavy duty saws used widely in the Forestry Industry |
Maintenance may include: | the correction of: lumps ridges cracks broken or damaged teeth |
Equipment may include: | hammers structure rolls levelling rolls tensioning instruments gauges and straight edges to check accuracy of hammering or tensioning welding equipment |
Communication may include: | verbal and non-verbal language constructive feedback active listening questioning to clarify and confirm understanding use of positive, confident and cooperative language use of language and concepts appropriate to individual social and cultural differences control of tone of voice body language |
Disposing of may include: | recycling un-serviceable saws/saws damaged during the repair process that cannot be repaired re-using un-serviceable saws/saws damaged during the repair process that cannot be repaired |
Ridges or lumps are to include: | defects obtained during saw operation |
Gauges and straight edges are to include: | measuring and accuracy instruments used in checking the results of hammering and tensioning |
Hammered | is the process of removing ridges and lumps from saw blades using hammers or rolls |
Structure rolls and levelling rolls | are devices for assisting in the process of removing saw defects such as ridges and lumps |
Patterns are to include: | methods which use hammers or rolls to remove defects evenly and without affecting the opposing side |
Curvature is to include: | how much tension is achieved in a saw by placing curvature in it |
Tensioning | is the process of placing tension in a blade to counteract force during cutting |
Welding jigs | hold the saw and tip in place securely to allow welding to occur |
Welding may include: | oxyacetylene gas tungsten arc |
Metal penetration and density is to include: | a weld which provides enough penetration to ensure a strong cohesion density that ensures the weld is free of holes and inclusions |
Run-off tabs are to ensure: | that minimal welding splatter ends up on the saw blade, subsequently requiring grinding off |
Tolerance may include: | profile pitch set material thickness to manufacturer's specifications |
Temper | is the toughening process which occurs by heating the welded or built up area and allowing it to cool slowly |
Records and reports may include: | maintenance of frame saw blades inspection storage locations quality outcomes hazards incidents equipment malfunctions and may be: manual using a computer-based system or another appropriate organisational communication system |