Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

FPISAW3226B Mapping and Delivery Guide
Saw logs using CNC optimising systems

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency FPISAW3226B - Saw logs using CNC optimising systems
Description This unit describes the outcomes required to set up, operate and maintain computer numerically controlled (CNC) optimising systems used for the maximisation of timber from every log. The unit includes operator maintenanceGeneral workplace legislative and regulatory requirements apply to this unit; however there are no specific licensing or certification requirements at the time of publicationThis unit replaces FPISAW3226A Saw logs using CNC optimising systems
Employability Skills This unit contains employability skills
Learning Outcomes and Application The unit involves sawing logs using CNC optimising systems in a forest products factory settingThe skills and knowledge required for competent workplace performance are to be used within the scope of the person's job and authority
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Sawmilling and Processing
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for machining
  • Applicable Occupational Health and Safety (OHS), environmental, legislative and organisational requirements relevant to sawing logs using CNC optimising systems are identified and followed
  • Work order is reviewed and checked with appropriate personnel
  • Type and quantity of logs to be sawn are acquired from the storage location
  • Equipment is selected appropriate to work requirements and checked for operational effectiveness in line with manufacturer's recommendations
  • Log sawing process is planned in line with site procedures and environmental requirements
  • Communication with others is established and maintained in line with OHS requirements
       
Element: Set up optimising system
  • CNC optimising program is set to job specifications
  • Safety equipment, including emergency stops, gauges, guards and controls are checked
  • Saw settings and adjustments are made in line with job requirements, and machine and tool manufacturer's instructions
  • Saw and cutting mechanisms are checked for safe and effective operation
  • Trial runs are conducted to check system operation, accuracy and quality of finished work
  • Final adjustments are made to the CNC optimising program and equipment in line with workplace procedures
       
Element: Operate optimising log saw
  • Pre start-up checks are carried out on equipment in line with site requirements
  • Logs are fed into machine in line with manufacturer's instructions, safe handling procedures and standard workplace operating procedures
  • Saw is operated in line with its designed capacity and purpose, tooling requirements and manufacturer's recommendations
  • Saw operation is monitored to ensure product quality and output
  • Waste quantities are checked and minimised
  • Items that do not meet quality requirements are repaired, recycled or discarded in line with workplace procedures
  • Sawing process and equipment faults are recorded and reported to the appropriate personnel
       
Element: Conduct operator maintenance
  • Equipment lock-out procedures are followed in line with OHS legislation and site proceduresBlades are checked for blunt or damaged condition in line with site procedures
  • Blunt or damaged saws are identified and dealt with in line with site procedures, manufacturer's recommendations and environmental requirements
  • Machining area is kept clear of dust, off-cuts and debris in line with OHS requirements
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to provide evidence that they can safely and efficiently saw logs using CNC optimising systems within organisational requirements

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to, and satisfy, all of the requirements of the elements of this unit and include demonstration of:

following applicable Commonwealth, State or Territory legislative and regulatory requirements and codes of practice relevant to sawing logs using CNC optimising systems

following organisational policies and procedures relevant to sawing logs using CNC optimising systems

sawing logs using CNC optimising systems in line with work order and within prescribed organisational tolerances

setting computer programs for the CNC optimising system to follow

conducting operator maintenance on CNC optimising equipment

Context of and specific resources for assessment

Competency is to be assessed in the workplace or realistically simulated workplace

Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints

Assessment of required knowledge, other than confirmatory questions, will usually be conducted in an off-site context

Assessment is to follow relevant regulatory or Australian Standards requirements

The following resources should be made available:

workplace location or simulated workplace

materials and equipment relevant to undertaking work applicable to this unit

specifications and work instructions

Method of assessment

Assessment must satisfy the endorsed Assessment Guidelines of the FPI11 Training Package

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of required knowledge

Assessment must be by direct observation of tasks, with questioning on required knowledge and it must also reinforce the integration of employability skills

Assessment methods must confirm the ability to access and correctly interpret and apply the required knowledge

Assessment may be applied under project-related conditions (real or simulated) and require evidence of process

Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances

Assessment may be in conjunction with assessment of other units of competency

The assessment environment should not disadvantage the candidate

Assessment practices should take into account any relevant language or cultural issues related to Aboriginality, gender or language backgrounds other than English

Where the participant has a disability, reasonable adjustment may be applied during assessment

Language and literacy demands of the assessment task should not be higher than those of the work role


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

This describes the essential skills and knowledge and their level required for this unit

Required skills

Technical skills sufficient to use and maintain relevant tools, machinery and equipment; efficiently and safely saw logs using CNC optimising systems

Communication skills and interpersonal techniques sufficient to interact appropriately with colleagues and others in the workplace

Literacy skills sufficient to accurately record and report workplace information, and maintain documentation

Numeracy skills sufficient to estimate, measure and calculate time required to complete a task

Problem solving skills sufficient to identify problems and equipment faults and demonstrate appropriate response procedures

Required knowledge

Applicable Commonwealth, State or Territory legislation, regulations, standards, codes of practice and established safe practices relevant to the full range of processes for sawing logs using CNC optimising systems

Environmental protection requirements, including the safe disposal of waste material, minimising carbon emissions and the cleaning of plant, tools and equipment

Organisational and site standards, requirements, policies and procedures for sawing logs using CNC optimising systems

Environmental risks and hazards

Characteristics of logs and defects

Set up and operation of CNC equipment

Optimising systems

Computer programs

Cutting patterns and sequences

Blade condition assessment

Industry standard cross-sections and lengths

Established communication channels and protocols

Problem identification and resolution strategies and common fault finding techniques

Types of tools and equipment and procedures for their safe use, operation and maintenance

Appropriate mathematical procedures for estimating and measuring, including calculating time to complete tasks

Procedures for recording and reporting workplace information

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

OHS requirements:

are to be in line with applicable Commonwealth, State or Territory legislation and regulations, and organisational safety policies and procedures, and may include:

personal protective equipment and clothing

safety equipment

first aid equipment

fire fighting equipment

hazard and risk control

fatigue management

elimination of hazardous materials and substances

safe forest practices including required actions relating to forest fire

manual handling including shifting, lifting and carrying

machine isolation and guarding

Environmental requirements may include:

legislation

organisational policies and procedures

workplace practices

Legislative requirements:

are to be in line with applicable Commonwealth, State or Territory legislation, regulations, certification requirements and codes of practice and may include:

award and enterprise agreements

industrial relations

Australian Standards

confidentiality and privacy

OHS

the environment

equal opportunity

anti-discrimination

relevant industry codes of practice

duty of care

Organisational requirements may include:

legal

organisational and site guidelines

policies and procedures relating to own role and responsibility

quality assurance

procedural manuals

quality and continuous improvement processes and standards

OHS, emergency and evacuation procedures

ethical standards

recording and reporting requirements

equipment use and maintenance and storage requirements

environmental management requirements (waste minimisation disposal, recycling and re-use guidelines)

Work order is to include:

instructions for the machining and despatch of logs and cut product from the work site

and may include:

type

size

length

angle

quantity

grade

instructions for the environmental monitoring of work and procedures

environmental care requirements relevant to the work

Appropriate personnel may include:

supervisors

suppliers

clients

colleagues

managers

Logs are to include:

assessment of:

diameter range

curvature

faults

species

moisture content

Sawing is to include:

sawing operations with CNC optimising systems

Storage locations may include:

storage racks

storage bays

bins

stacks

pallet boxes

modularised storage components

temporary stacking bays (stand, frame or ground)

and may be divided into:

standard product classification

product designation

size

dimension

stack number

weight

grade

shelf life

stock rotation position

Equipment is to include:

CNC optimising log saws

procedures for lock-out, ie protecting operators and co-workers from accidental injury by isolating the machine from the power source

Communication may include:

verbal and non-verbal language

constructive feedback

active listening

questioning to clarify and confirm understanding

use of positive, confident and cooperative language

use of language and concepts appropriate to individual social and cultural differences

control of tone of voice

body language

CNC optimising program is to include:

computer generated program, selected by the operator (sub-programs, parametric performance of CAM functions)

downloading and storing 3D scan data, which translates into the CNC equipment operating automatically to fulfil its programmed instructions

Saw settings may include:

measurement

setting equipment to stops, fences, angles, depths, feeds or speeds

Pre start-up checks

are conducted to ensure:

equipment has been set-up correctly

blades are installed accurately

machinery is operating to optimum performance

Output is to include:

the speed at which material is cut

rate at which material is cut

Waste may include:

off-cuts

shavings

sawdust

Records and reports may include:

the sawing method

optimising reports

product type

size

inspection

grading and labelling outcomes

storage locations

quality outcomes

hazards

incidents

equipment malfunctions

and may be:

manualusing a computer-based system or another appropriate organisational communication system

Dealing with may include:

repairing blunt or damaged saws

disposing of blunt or damaged saws that cannot be repaired

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Applicable Occupational Health and Safety (OHS), environmental, legislative and organisational requirements relevant to sawing logs using CNC optimising systems are identified and followed 
Work order is reviewed and checked with appropriate personnel 
Type and quantity of logs to be sawn are acquired from the storage location 
Equipment is selected appropriate to work requirements and checked for operational effectiveness in line with manufacturer's recommendations 
Log sawing process is planned in line with site procedures and environmental requirements 
Communication with others is established and maintained in line with OHS requirements 
CNC optimising program is set to job specifications 
Safety equipment, including emergency stops, gauges, guards and controls are checked 
Saw settings and adjustments are made in line with job requirements, and machine and tool manufacturer's instructions 
Saw and cutting mechanisms are checked for safe and effective operation 
Trial runs are conducted to check system operation, accuracy and quality of finished work 
Final adjustments are made to the CNC optimising program and equipment in line with workplace procedures 
Pre start-up checks are carried out on equipment in line with site requirements 
Logs are fed into machine in line with manufacturer's instructions, safe handling procedures and standard workplace operating procedures 
Saw is operated in line with its designed capacity and purpose, tooling requirements and manufacturer's recommendations 
Saw operation is monitored to ensure product quality and output 
Waste quantities are checked and minimised 
Items that do not meet quality requirements are repaired, recycled or discarded in line with workplace procedures 
Sawing process and equipment faults are recorded and reported to the appropriate personnel 
Equipment lock-out procedures are followed in line with OHS legislation and site proceduresBlades are checked for blunt or damaged condition in line with site procedures 
Blunt or damaged saws are identified and dealt with in line with site procedures, manufacturer's recommendations and environmental requirements 
Machining area is kept clear of dust, off-cuts and debris in line with OHS requirements 

Forms

Assessment Cover Sheet

FPISAW3226B - Saw logs using CNC optimising systems
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

FPISAW3226B - Saw logs using CNC optimising systems

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: