Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

FWPCOT2226 Mapping and Delivery Guide
Debark logs mechanically

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency FWPCOT2226 - Debark logs mechanically
Description
Employability Skills
Learning Outcomes and Application This unit of competency describes the outcomes required to mechanically debark logs to a set diameter and length. The unit includes assessing logs for diameter, species, faults and moisture content.The unit applies to Harvesting Technician, Mobile Equipment Operator. No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

The following resources must be made available:

a mechanical debarker

logs to be debarked

suitable personal protective equipment (PPE) to operate a mechanical debarker

organisational policies and procedures for operating a mechanical debarker

relevant personnel for the purposes of communicating information.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessor requirements

Assessors must:

hold the appropriate assessor competency standards as outlined in regulations; and

be able to demonstrate vocational competencies at least to the level being assessed; and

be able to demonstrate how they are continuing to develop their VET knowledge and skills as well as maintaining their industry currency and assessor competence.

Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for debarking
  • Review work order and clarify with appropriate personnel.
  • Assess type and quantity of logs to be processed with debarker.
  • Select equipment and check for operational effectiveness.
  • Plan debarking process in line with site procedures and environmental requirements
  • Communication with others is established and maintained in line with OHS requirements
       
Element: Debark logs
  • Carry out pre-operational checks on debarker.
  • Feed material into the machine at the rate prescribed by organisational requirements.
  • Regularly check and adjust conveyors to maintain desired quality and output.
  • Segregate logs with defects and dispose of in line with site procedures and environmental requirements.
  • Direct debarked logs to storage in a designated location in line with work order.
  • Report processing faults to appropriate personnel.
       
Element: Conduct operator maintenance
  • Lock-out debarker in line with site procedures.
  • Conduct visual inspection to identify issues and faults.
  • Check debarker for blunt of damaged cutters and remove and replace, in line with manufacturer’s specifications.
  • Deal with blunt or damaged cutters in line with site procedures and environmental requirements.
  • Record and report debarker operations, faults and maintenance activities.
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1. Prepare for debarking

1.1 Review work order and clarify with appropriate personnel.

1.2 Assess type and quantity of logs to be processed with debarker.

1.3 Select equipment and check for operational effectiveness.

1.4 Plan debarking process in line with site procedures and environmental requirements

1.5 Communication with others is established and maintained in line with OHS requirements

2. Debark logs

2.1 Carry out pre-operational checks on debarker.

2.2 Feed material into the machine at the rate prescribed by organisational requirements.

2.3 Regularly check and adjust conveyors to maintain desired quality and output.

2.4 Segregate logs with defects and dispose of in line with site procedures and environmental requirements.

2.5 Direct debarked logs to storage in a designated location in line with work order.

2.6 Report processing faults to appropriate personnel.

3. Conduct operator maintenance

3.1 Lock-out debarker in line with site procedures.

3.2 Conduct visual inspection to identify issues and faults.

3.3 Check debarker for blunt of damaged cutters and remove and replace, in line with manufacturer’s specifications.

3.4 Deal with blunt or damaged cutters in line with site procedures and environmental requirements.

3.5 Record and report debarker operations, faults and maintenance activities.

A person demonstrating competency in this unit must satisfy all of the elements, performance criteria and foundation skills of this unit. If a specific volume or frequency is not stated below, then evidence must be provided that the following requirements have been performed on at least one occasion:

safely and effectively operate a mechanical debarker in line with a work order

assess logs to be debarked for defects that will effect processing

work safely and communicate effectively with others in the work area

follow organisational policies and procedures for operating a mechanical debarker

carry out routine maintenance on a mechanical debarker

record and report debarker operations and maintenance activities.

A person competent in this unit must be able to demonstrate knowledge of:

workplace policies and procedures for operating a mechanical debarker

environmental protection requirements and safe disposal of waste

operational procedures of debarking equipment including start-up and shut-down procedures

characteristics of trees and timber defects that can cause processing problems including:

incorrect moisture content

warp

wane

curvature

shakes

insect defects

knots

resin pockets

established communication channels and protocols to maintain safety

processes for managing risks and hazards associated with debarking logs

workplace health and safety requirements and emergency evacuation procedures

procedures for recording and reporting workplace records and information.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1. Prepare for debarking

1.1 Review work order and clarify with appropriate personnel.

1.2 Assess type and quantity of logs to be processed with debarker.

1.3 Select equipment and check for operational effectiveness.

1.4 Plan debarking process in line with site procedures and environmental requirements

1.5 Communication with others is established and maintained in line with OHS requirements

2. Debark logs

2.1 Carry out pre-operational checks on debarker.

2.2 Feed material into the machine at the rate prescribed by organisational requirements.

2.3 Regularly check and adjust conveyors to maintain desired quality and output.

2.4 Segregate logs with defects and dispose of in line with site procedures and environmental requirements.

2.5 Direct debarked logs to storage in a designated location in line with work order.

2.6 Report processing faults to appropriate personnel.

3. Conduct operator maintenance

3.1 Lock-out debarker in line with site procedures.

3.2 Conduct visual inspection to identify issues and faults.

3.3 Check debarker for blunt of damaged cutters and remove and replace, in line with manufacturer’s specifications.

3.4 Deal with blunt or damaged cutters in line with site procedures and environmental requirements.

3.5 Record and report debarker operations, faults and maintenance activities.

Not Applicable

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Review work order and clarify with appropriate personnel. 
Assess type and quantity of logs to be processed with debarker. 
Select equipment and check for operational effectiveness. 
Plan debarking process in line with site procedures and environmental requirements 
Communication with others is established and maintained in line with OHS requirements 
Carry out pre-operational checks on debarker. 
Feed material into the machine at the rate prescribed by organisational requirements. 
Regularly check and adjust conveyors to maintain desired quality and output. 
Segregate logs with defects and dispose of in line with site procedures and environmental requirements. 
Direct debarked logs to storage in a designated location in line with work order. 
Report processing faults to appropriate personnel. 
Lock-out debarker in line with site procedures. 
Conduct visual inspection to identify issues and faults. 
Check debarker for blunt of damaged cutters and remove and replace, in line with manufacturer’s specifications. 
Deal with blunt or damaged cutters in line with site procedures and environmental requirements. 
Record and report debarker operations, faults and maintenance activities. 

Forms

Assessment Cover Sheet

FWPCOT2226 - Debark logs mechanically
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

FWPCOT2226 - Debark logs mechanically

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: