Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

FWPCOT3268 Mapping and Delivery Guide
Plane and sand engineered wood products

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency FWPCOT3268 - Plane and sand engineered wood products
Description
Employability Skills
Learning Outcomes and Application This unit of competency describes the skills and knowledge required to plane and sand the surfaces of engineered wood products in a timber manufacturing facility, optimising product thickness while retaining its integrity.The unit applies to individuals who work as timber products technicians and production workers. Operators generally work under broad or limited direction to complete routine activities related to their own work, and take responsibility for their work.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for planing and sanding engineered wood product
  • Review work order, workplace health and safety requirements, environmental protection practices and emergency procedures for engineered wood product dressing operation and, where required, check with appropriate personnel
  • Identify and report hazards and use personal protective equipment according to workplace requirements and health and safety legislative requirements to maintain safe work practices
  • Obtain type and quantity of engineered wood product for planing and sanding from the production process
       
Element: Plane and sand engineered wood product
  • Use equipment according to workplace health and safety procedures, manufacturer instructions and environmental protection practices
  • Complete pre start-up checks and set planing and sanding thickness and feed rate for optimal product recovery
  • Position material and feed at a rate appropriate to machine speed, capacity, engineered wood product thickness and condition
  • Plane and sand engineered wood product to specification and assess product visually throughout the process for thickness, finish quality and faults
  • Coordinate outfeed to ensure efficient recovery of planed and sanded material
  • Check dust extraction equipment regularly and clean to avoid blockages
       
Element: Redistribute material
  • Grade finished engineered wood product for quality and use according to industry standards
  • Direct material to storage or processing operations according to workplace procedures
  • Dispose of sub-standard material according to environmental protection practices
  • Clean work area according to workplace health and safety procedures
       
Element: Complete operator maintenance
  • Lock out equipment according to workplace health and safety procedures
  • Check planer blades and sanding belts for bluntness or damage
  • Remove and replace planer blades and sanding belts according to manufacturer recommendations
  • Keep machine area clear of dust and debris according to workplace health and safety procedures
  • Record and report production outcomes, equipment faults and maintenance requirements to appropriate personnel
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Review work order, workplace health and safety requirements, environmental protection practices and emergency procedures for engineered wood product dressing operation and, where required, check with appropriate personnel 
Identify and report hazards and use personal protective equipment according to workplace requirements and health and safety legislative requirements to maintain safe work practices 
Obtain type and quantity of engineered wood product for planing and sanding from the production process 
Use equipment according to workplace health and safety procedures, manufacturer instructions and environmental protection practices 
Complete pre start-up checks and set planing and sanding thickness and feed rate for optimal product recovery 
Position material and feed at a rate appropriate to machine speed, capacity, engineered wood product thickness and condition 
Plane and sand engineered wood product to specification and assess product visually throughout the process for thickness, finish quality and faults 
Coordinate outfeed to ensure efficient recovery of planed and sanded material 
Check dust extraction equipment regularly and clean to avoid blockages 
Grade finished engineered wood product for quality and use according to industry standards 
Direct material to storage or processing operations according to workplace procedures 
Dispose of sub-standard material according to environmental protection practices 
Clean work area according to workplace health and safety procedures 
Lock out equipment according to workplace health and safety procedures 
Check planer blades and sanding belts for bluntness or damage 
Remove and replace planer blades and sanding belts according to manufacturer recommendations 
Keep machine area clear of dust and debris according to workplace health and safety procedures 
Record and report production outcomes, equipment faults and maintenance requirements to appropriate personnel 

Forms

Assessment Cover Sheet

FWPCOT3268 - Plane and sand engineered wood products
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

FWPCOT3268 - Plane and sand engineered wood products

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: