List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
ELEMENT | PERFORMANCE CRITERIA |
Elements define the essential outcomes. | Performance criteria specify the level of performance needed to demonstrate achievement of the element. |
1. Comply with infection control regulations and guidelines and related legal obligations. | 1.1 Identify federal, state or territory, and local standards, regulations and guidelines that apply to beauty treatments and skin penetration procedures 1.2 Review organisational infection control policy and procedures for compliance 1.3 Identify infection control risks for skin penetration treatments 1.4 Monitor workplace for potential infection control risks |
2. Monitor hygiene of premises. | 2.1 Observe workplace to ensure surfaces and equipment are cleaned and disinfected 2.2 Clean and disinfect non-penetrating instruments and articles 2.3 Monitor removal and disposal of contaminated material 2.4 Monitor handling and disposal of sharps and the cleaning of blood or body fluid spills 2.5 Check dilution rates, use and storage of cleaning products 2.6 Monitor storage of cleaning and treatment equipment 2.7 Provide clean linen or single use, disposable coverings for each treatment 2.8 Place soiled linen and protective clothing in a suitable receptacle. 2.9 Clean and disinfect work area after treatment |
3. Maintain infection control for skin penetration treatments. | 3.1 Maintain personal protection using standard and additional precautions for client contact as required 3.2 Provide single use, disposable and clean instruments where possible for each treatment 3.3 Ensure instruments, equipment or other items intended to penetrate the skin or be used on mucous membranes are sterile at time of use 3.4 Follow skin preparation procedures to minimise risk of transmission 3.5 Immediately dispose of single-use items and waste in appropriate containers 3.6 Separate, remove, clean and sterilise potentially contaminated items according to organisation infection control policy and procedure |
4. Sterilise equipment and maintain steriliser. | 4.1 Ensure work flows from dirty zone to clean zone 4.2 Clean and dry items to be sterilised 4.3 Load steriliser and set steriliser cycle according to manufacturer instructions and Australian standard. 4.4 Unload packages, inspect for sterilising, validate and record details according to manufacturer instructions and Australian standards 4.5 Store sterile items correctly to prevent contamination 4.6 Monitor the sterilising process 4.7 Inspect and clean steriliser and steriliser trays according to manufacturer guidelines and Australian standard |
5. Maintain awareness of clinic design for control of infection risks. | 5.1 Identify aspects of the design of premises, surfaces, fixtures and fittings that minimise risk of transmission of infection 5.2 Arrange cleaning area to ensure the separation of dirty and clean items and work flow is from dirty to clean to sterile. 5.3 Clean cleaning and sterilising area according to organisational policy and procedures. |
The candidate must show evidence of the ability to complete tasks outlined in the elements and performance criteria of this unit, manage tasks and manage contingencies in the context of the job role. There must be evidence that the candidate has:
integrated the maintenance of infection control with skin penetration technical skills that individually or in combination demonstrate:
identification of potential cross contamination risks, protecting self and client from infection risks
choosing and using appropriate cleaning, disinfection and sterilising procedures for instruments, equipment and equipment attachments and work surfaces
use of correct steriliser operation procedures:
packaging of items
loading
monitoring
validation
calibration
documentation requirements
disposing of waste and sharps
provided a written review of workplace compliance with relevant state or territory and local council laws, regulations and requirements for skin penetration treatments.
The candidate must be able to demonstrate essential knowledge required to effectively complete tasks outlined in the elements and performance criteria of this unit, manage tasks and manage contingencies in the context of the work role. This includes knowledge of:
Australian standards AS/NZS4815 and 4187 relating to infection control in office based health care facilities
relevant state or territory legislation and guidelines relating to infection control procedures for skin penetration treatments
local council requirements for businesses offering skin penetration treatments
organisational policy and procedures relating to infection control
legal responsibilities in relation to infection control, sterilising, registration or business licensing, conduct of occupation, and maintenance of premises relevant to role
standard and additional precautions as defined by the National Health and Medical Research Council (NHMRC)
industry codes of practice
aetiology of infection
sources of infection and means of transmission
risk management in relation to infection control
procedures and practices that support infection control measures and prevent infection transmission
cleaning, disinfection and sterilising procedures
procedures for responding to spills
needle stick or sharps injury procedures for notification and response
impact of premises layout and workflow on infection control risks
manufacturer instructions in relation to cleaning, disinfecting and sterilising equipment and products
risk management process for identifying treatment infection control risks
workplace infection control risks.