List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
ELEMENT | PERFORMANCE CRITERIA |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Prepare for job | 1.1 Job specifications are read and interpreted from job documentation or production control 1.2 Set-up is carried out correctly in minimum time with minimum wastage 1.3 Availability of all job-related components is checked |
2. Set up delivery systems | 2.1 Delivery systems are set up and adjusted according to job specifications |
3. Set up machine for basic single or continuous folding | 3.1 Folding units are set up and adjusted according to job specifications 3.2 Folding rollers/belts/rails are set up and adjusted according to job specifications |
4. Set up in-line units for basic processes | 4.1 Minor in-line printing/converting/binding units are set up for basic processes and adjusted according to machine requirements and job specifications 4.2 Assistance is given setting up major in-line printing/converting/binding units |
5. Conduct sample run | 5.1 Material to be used for sample is organised correctly 5.2 Machine is set up and operated to produce a specified sample according to work health and safety requirements, manufacturer’s specifications and enterprise procedures 5.3 Sample is visually inspected to determine adjustment requirements 5.4 Results are interpreted to determine adjustment requirements 5.5 Adjustments are carried out according to product and machine specifications |
Evidence of the ability to:
demonstrate all safety devices on the machinery
correctly set up machines for basic folding for TWO jobs (if possible using different sizes and weights of substrate) EITHER with a single fold to run continuously OR a single quire fold on a sheet gather/stitch/fold/trim machine OR an automatic web-fed machine to achieve a single fold according to manufacturer’s and job specifications, enterprise procedures and listed performance criteria.
Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.
To complete the unit requirements safely and effectively, the individual must:
explain the work health and safety factors that must be considered when:
setting up and/or operating machine transport systems
setting folder transportation and delivery systems
setting up and/or adjusting the folding unit
adjusting machine units
explain folding requirements information that would be found in the job documentation or production control system
for reel systems only, identify areas of the reel stand to monitor to ensure trouble-free operation
for sheet systems only, identify areas of the sheet-fed transportation system to monitor to ensure trouble-free operation
identify areas of the delivery system to observe to prevent damage to the finished product
list ways folded sheets can be secured for dispatch
explain communication to instigate if the:
job is out-of-square
ink is too wet for production
job does not coincide with the sample
explain how to avoid substrate scratching/scuffing during transportation
list problems to expect if the machine is running too fast
determine checks of roller pressures for correctness
explain the adjustment if the sheet is out-of-square
explain possible reasons for the sheet being out-of-square, and adjustments required if the sheet will not leave the folding unit
explain the adjustment to ensure sheets are not smudging/scuffing
list steps to ensure correct alignment of in-line processes/units
explain adjustments to keep units correctly positioned
identify segments of the product to inspect at sample run completion to ensure product quality
identify machine manuals, safety and other documentation relevant to this task, where they are kept, and the information included in them.